plastic1982
Cadet
- Joined
- May 16, 2022
- Messages
- 4
LT Nominating Commn re Sean Thomson
I am trying out Truenas SCALE, running 22.02.1. My server specs are as follows:
MB: Supermicro M11SDV-8CT-LN4F
Proc: AMD EPYC 3201 SoC
16GB Supermicro SATA DOM
6 x 8TB WD Red
4x 1GbE with Intel I350-AM4
I have set up the NAS aspect of the system and it works perfectly on my local network. I have set up a Windows 10 VM and an Ubuntu 22.04 VM, which both work, and have WAN access. My issue is that I cannot access the NAS storage from the VMs.
I have tried to set up a bridge interface so that my VM can see the NAS, using the below reference guide, but I am stuck because my networking settings keep giving me the same error no matter what I do.
https://www.truenas.com/docs/scale/scaleuireference/virtualization/accessingnasfromvm/
My motherboard has an IPMI NIC, and 4 Intel gigabit NICs called “eno1” through “eno4”
Eno1 presently has DHCP active, and has an assigned IP4 of 192.168.0.148/24
Eno2 presently has an IP alias of 192.168.0.140/24
Eno 3 and 4 are not active
I am trying to set up a bridge so my VMs can see my NAS, but if I uncheck DHCP on eno1, and try to set the IP4 as 192.168.0.148/24, it gives the error “The network 192.168.0.0/24 is already in use by another interface.”
If I try to set up a bridge and try to set the IP4 as 192.168.0.140/24, it gives the error “The network 192.168.0.0/24 is already in use by another interface.”
Basically, no matter what I try, I cannot set an IP alias. I don’t really know how it let me set the one for eno2. If I can’t see the NAS from my VMs, my use case is severely hampered. Can someone tell me how to solve this “The network 192.168.0.0/24 is already in use by another interface.” Issue so I can get my bridge working?
I am trying out Truenas SCALE, running 22.02.1. My server specs are as follows:
MB: Supermicro M11SDV-8CT-LN4F
Proc: AMD EPYC 3201 SoC
16GB Supermicro SATA DOM
6 x 8TB WD Red
4x 1GbE with Intel I350-AM4
I have set up the NAS aspect of the system and it works perfectly on my local network. I have set up a Windows 10 VM and an Ubuntu 22.04 VM, which both work, and have WAN access. My issue is that I cannot access the NAS storage from the VMs.
I have tried to set up a bridge interface so that my VM can see the NAS, using the below reference guide, but I am stuck because my networking settings keep giving me the same error no matter what I do.
https://www.truenas.com/docs/scale/scaleuireference/virtualization/accessingnasfromvm/
My motherboard has an IPMI NIC, and 4 Intel gigabit NICs called “eno1” through “eno4”
Eno1 presently has DHCP active, and has an assigned IP4 of 192.168.0.148/24
Eno2 presently has an IP alias of 192.168.0.140/24
Eno 3 and 4 are not active
I am trying to set up a bridge so my VMs can see my NAS, but if I uncheck DHCP on eno1, and try to set the IP4 as 192.168.0.148/24, it gives the error “The network 192.168.0.0/24 is already in use by another interface.”
If I try to set up a bridge and try to set the IP4 as 192.168.0.140/24, it gives the error “The network 192.168.0.0/24 is already in use by another interface.”
Basically, no matter what I try, I cannot set an IP alias. I don’t really know how it let me set the one for eno2. If I can’t see the NAS from my VMs, my use case is severely hampered. Can someone tell me how to solve this “The network 192.168.0.0/24 is already in use by another interface.” Issue so I can get my bridge working?