Royce Rezendes
Dabbler
- Joined
- Mar 30, 2015
- Messages
- 10
Error Information:
I recently purchased new hardware and transferred my Working hard drives (sata) from a large pc tower into a much smaller NAS case. I have my installation running RaidZ1 (just movies and tv shows) with all the plugins I want running fine, but I cannot seem to get this one drive to cooperate. I have researched for like half a day or longer trying to resolve this and so far I have nothing to show for it. I have tried many zpool commands such as "zpool replace/online/offline/detach" etc... I did a replace operation at one point which most of the time that option doesn't show a drive on the list of replacements to choose from (this might be because I would be "replacing" it with itself?), the Replace succeeded but the drive wasn't online/wouldn't go online. I did a scrub, which didn't seem to change anything either. I have verified all my physical connections including reseating all drives and sata power/data cables. Last thing I did (just now) was Offline the drive and reboot the server, it now shows all drives online and Resilvering in progress (I'll edit this post with the results). It would be awesome if someone could help me figure this out.
Drive in question:
-Seagate ST3000DM001-1CH166 CC24
-connected to ada4 (sata)
-serial W1F2Y92S
smartctl -a:
I tried to get smartctl command to give me any valuable output but all I could get was "No Match." or "/dev/ada4: Unable to detect device type"
Debug.log: Following the Forum Rules post, I couldn't locate the debug file (maybe instructions are for an older version?). Here's the tail end of a huge file I found inside the archive named debug.log...
EDIT1:
Well, I feel a little silly now... Here's the result after the Resilver it automatically started:
Although all the drives are now Online, the error above is now concerning me. How can I resolve/clear this error?
I recently purchased new hardware and transferred my Working hard drives (sata) from a large pc tower into a much smaller NAS case. I have my installation running RaidZ1 (just movies and tv shows) with all the plugins I want running fine, but I cannot seem to get this one drive to cooperate. I have researched for like half a day or longer trying to resolve this and so far I have nothing to show for it. I have tried many zpool commands such as "zpool replace/online/offline/detach" etc... I did a replace operation at one point which most of the time that option doesn't show a drive on the list of replacements to choose from (this might be because I would be "replacing" it with itself?), the Replace succeeded but the drive wasn't online/wouldn't go online. I did a scrub, which didn't seem to change anything either. I have verified all my physical connections including reseating all drives and sata power/data cables. Last thing I did (just now) was Offline the drive and reboot the server, it now shows all drives online and Resilvering in progress (I'll edit this post with the results). It would be awesome if someone could help me figure this out.
Drive in question:
-Seagate ST3000DM001-1CH166 CC24
-connected to ada4 (sata)
-serial W1F2Y92S







smartctl -a:
I tried to get smartctl command to give me any valuable output but all I could get was "No Match." or "/dev/ada4: Unable to detect device type"
Debug.log: Following the Forum Rules post, I couldn't locate the debug file (maybe instructions are for an older version?). Here's the tail end of a huge file I found inside the archive named debug.log...
Code:
Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = iface: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv4: 200.200.200.6/24 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = autostart: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = vnet: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = nat: Disabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = mac: 02:42:f1:00:08:0b Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = status: Running Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = type: pluginjail Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = flags: allow.raw_sockets=true Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:221] cmd_pipe.__init__: leave Mar 30 00:33:21 roycenas manage.py: [common.warden:460] warden_base.run: leave Mar 30 00:33:21 roycenas manage.py: [freeadmin.navtree:593] Plugin plexmediaserver requested to be appended to plugins Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = id: 1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = host: plexmediaserver_1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = iface: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv4: 200.200.200.6/24 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = autostart: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = vnet: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = nat: Disabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = mac: 02:42:f1:00:08:0b Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = status: Running Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = type: pluginjail Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = flags: allow.raw_sockets=true Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:221] cmd_pipe.__init__: leave Mar 30 00:33:21 roycenas manage.py: [common.warden:460] warden_base.run: leave Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = id: 1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = host: plexmediaserver_1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = iface: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv4: 200.200.200.6/24 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = autostart: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = vnet: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = nat: Disabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = mac: 02:42:f1:00:08:0b Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = status: Running Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = type: pluginjail Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = flags: allow.raw_sockets=true Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:221] cmd_pipe.__init__: leave Mar 30 00:33:21 roycenas manage.py: [common.warden:460] warden_base.run: leave Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = id: 1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = host: plexmediaserver_1 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = iface: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv4: 200.200.200.6/24 Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv4: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = alias-bridge-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = defaultrouter-ipv6: Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = autostart: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = vnet: Enabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = nat: Disabled Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = mac: 02:42:f1:00:08:0b Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = status: Running Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = type: pluginjail Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = flags: allow.raw_sockets=true Mar 30 00:33:21 roycenas manage.py: [common.cmd:210] cmd_pipe.__init__: out = Mar 30 00:33:21 roycenas manage.py: [common.cmd:221] cmd_pipe.__init__: leave Mar 30 00:33:21 roycenas manage.py: [common.warden:460] warden_base.run: leave
EDIT1:
Well, I feel a little silly now... Here's the result after the Resilver it automatically started:

Although all the drives are now Online, the error above is now concerning me. How can I resolve/clear this error?
Last edited: