Can't connect to server over 10Gbe anymore

[Th3RadMan]

My system has been running fine for months, then I got annoyed of the Windows these files might harm your pc warning every time I transferred something over my network. To solve this I changed some windows security settings and disconnected my network share, only to not be able to reconnect it again.

Every time windows says I am using the wrong username/password, even though they are both correct. I am able to log into the share with the same ip and info on a vm running on the same system as freenas and I can add a network location to the share directory under my 10gbe ip. I am able to add a network drive with my default network, but naturally I rather get my 10gbe back up. Every permission is set to my user as the owner.

My 10gb card's drivers are up to date and I can ping to my main pc from freenas.

Any ideas why I might be getting this issue?

Vmware ESXI 6.7.0
freenas version: FreeNAS-11.2-U4.1

 

[joeschmuck]

I changed some windows security settings

Did you restore the settings you changed? How about restoring a previous backup of your system to see if that works? Odds are the issue is your Windoze machine because you did change security settings but I'm sure you know that.

 

[Th3RadMan]

Did you restore the settings you changed? How about restoring a previous backup of your system to see if that works? Odds are the issue is your Windoze machine because you did change security settings but I'm sure you know that.

Yep, I reset and rolled back without any luck.

 

[Chris Moore]

Every time windows says I am using the wrong username/password,

I went through something that sounds like this with Windows. I ended up needing to change a setting in Group Policy Editor.
It might not be your answer, but you might want to check this:
https://serverfault.com/questions/888690/windows-10-cannot-access-network-shared-locations-or-drives

 

[Chris Moore]

Any ideas why I might be getting this issue?

When you were editing settings, did you edit things on the FreeNAS side or on the Windows side, or both?

 

[Th3RadMan]

When you were editing settings, did you edit things on the FreeNAS side or on the Windows side, or both?

I changed owners on Freenas after I only changed stuff on Windows

I managed to solve the issue though... by the classic restarting my windows pc. Logged back in and I was reconnected to the drive

 

[Chris Moore]

I managed to solve the issue though... by the classic restarting my windows pc. Logged back in and I was reconnected to the drive

Makes me think of the classic tech support call, "Did you check to see if it was plugged in"...

 

[joeschmuck]

Glad you fixed it. Do you still have the annoying messages you were trying to get rid of?

 

[Th3RadMan]

Glad you fixed it. Do you still have the annoying messages you were trying to get rid of?

Nope, in the internet options on the control panel I added added my servers ip to my local intranet, so it has custom security settings vs my default gateway ip.