MattG
Cadet
- Joined
- Feb 14, 2015
- Messages
- 3
After searching the forums for FreeNAS compatible eSATA expansion cards I purchased the Startech pexesata2, that is based on the SiI3132 chipset (http://www.startech.com/Cards-Adapters/HDD-Controllers/SATA-Cards/2-Port-PCI-Express-eSATA-Controller-Card~PEXESATA2). I am having issues getting the hardware to detect the card, and wanted to see if anybody can spot anything obvious before I return it. I went through the BIOS top to bottom to make sure it wasn't an issue there. Here are the specs and the output from various commands, let me know if you need anything else.
FreeNAS build: FreeNAS-9.3-STABLE-201503270027
uname -a:
Hardware:
camcontrol devlist:
pciconf -lv:
dmesg:
sysctl kern.geom.disk:
FreeNAS build: FreeNAS-9.3-STABLE-201503270027
uname -a:
Code:
FreeBSD freenas.local 9.3-RELEASE-p12 FreeBSD 9.3-RELEASE-p12 #2 r275790+e006356: Thu Mar 26 17:28:49 PDT 2015 root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
Hardware:
Code:
ASRock C2750D4I Mini ITX Server Motherboard Crucial 16GB Kit (8GBx2) DDR3/DDR3L-1600MT/s (PC3-12800) DR x8 ECC UDIMM Server Memory CT2KIT102472BD160B/CT2CP102472BD160B ADATA S102 16GB USB 3.0 Flash Drive Model AS102P-16G-RGY SILVERSTONE ST45SF-G 450W SFX12V SLI Ready CrossFire Ready 80 PLUS GOLD Certified Full Modular Active PFC Power Supply 5x WDC WD20EFRX-68EUZN0 (2TB) 3x SAMSUNG HD204UI (2TB) Startech 2 Port PCI Express eSATA Controller Adapter Card Model pexesata2 1x WD Red WD40EFRX (4TB) (In an external enclosure, attached to the eSATA card) Rosewill RX-358 V2 BLK - Black, 3.5" SATA to USB & eSATA External Enclosure with Internal 80 mm Fan
camcontrol devlist:
Code:
<WDC WD20EFRX-68EUZN0 82.00A82> at scbus0 target 0 lun 0 (pass0,ada0) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus1 target 0 lun 0 (pass1,ada1) <WDC WD20EFRX-68EUZN0 80.00A80> at scbus2 target 0 lun 0 (pass2,ada2) <WDC WD20EFRX-68EUZN0 82.00A82> at scbus3 target 0 lun 0 (pass3,ada3) <SAMSUNG HD204UI 1AQ10001> at scbus4 target 0 lun 0 (pass4,ada4) <SAMSUNG HD204UI 1AQ10001> at scbus5 target 0 lun 0 (pass5,ada5) <Marvell Console 1.01> at scbus9 target 0 lun 0 (pass6) <WDC WD20EFRX-68EUZN0 82.00A82> at scbus14 target 0 lun 0 (pass7,ada6) <SAMSUNG HD204UI 1AQ10001> at scbus15 target 0 lun 0 (pass8,ada7) <ADATA USB Flash Drive 1100> at scbus17 target 0 lun 0 (pass9,da0)
pciconf -lv:
Code:
hostb0@pci0:0:0:0: class=0x060000 card=0x00000000 chip=0x1f018086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x1f101849 chip=0x1f108086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib2@pci0:0:3:0: class=0x060400 card=0x1f121849 chip=0x1f128086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI pcib9@pci0:0:4:0: class=0x060400 card=0x1f131849 chip=0x1f138086 rev=0x02 hdr=0x01 vendor = 'Intel Corporation' class = bridge subclass = PCI-PCI hostb1@pci0:0:14:0: class=0x060000 card=0x1f141849 chip=0x1f148086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = HOST-PCI none0@pci0:0:15:0: class=0x080600 card=0x1f161849 chip=0x1f168086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = base peripheral none1@pci0:0:19:0: class=0x088000 card=0x1f151849 chip=0x1f158086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = base peripheral ehci0@pci0:0:22:0: class=0x0c0320 card=0x1f2c1849 chip=0x1f2c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = USB ahci2@pci0:0:23:0: class=0x010601 card=0x1f221849 chip=0x1f228086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = SATA ahci3@pci0:0:24:0: class=0x010601 card=0x1f321849 chip=0x1f328086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = mass storage subclass = SATA isab0@pci0:0:31:0: class=0x060100 card=0x1f381849 chip=0x1f388086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = bridge subclass = PCI-ISA none2@pci0:0:31:3: class=0x0c0500 card=0x1f3c1849 chip=0x1f3c8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' class = serial bus subclass = SMBus pcib3@pci0:2:0:0: class=0x060400 card=0x860810b5 chip=0x860810b5 rev=0xba hdr=0x01 vendor = 'PLX Technology, Inc.' device = 'PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch' class = bridge subclass = PCI-PCI pcib4@pci0:3:1:0: class=0x060400 card=0x860810b5 chip=0x860810b5 rev=0xba hdr=0x01 vendor = 'PLX Technology, Inc.' device = 'PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch' class = bridge subclass = PCI-PCI pcib5@pci0:3:5:0: class=0x060400 card=0x860810b5 chip=0x860810b5 rev=0xba hdr=0x01 vendor = 'PLX Technology, Inc.' device = 'PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch' class = bridge subclass = PCI-PCI pcib7@pci0:3:7:0: class=0x060400 card=0x860810b5 chip=0x860810b5 rev=0xba hdr=0x01 vendor = 'PLX Technology, Inc.' device = 'PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch' class = bridge subclass = PCI-PCI pcib8@pci0:3:9:0: class=0x060400 card=0x860810b5 chip=0x860810b5 rev=0xba hdr=0x01 vendor = 'PLX Technology, Inc.' device = 'PEX 8608 8-lane, 8-Port PCI Express Gen 2 (5.0 GT/s) Switch' class = bridge subclass = PCI-PCI ahci0@pci0:4:0:0: class=0x010601 card=0x91721849 chip=0x91721b4b rev=0x11 hdr=0x00 vendor = 'Marvell Technology Group Ltd.' class = mass storage subclass = SATA pcib6@pci0:5:0:0: class=0x060400 card=0x11501849 chip=0x11501a03 rev=0x02 hdr=0x01 vendor = 'ASPEED Technology, Inc.' device = 'AST1150 PCI-to-PCI Bridge' class = bridge subclass = PCI-PCI vgapci0@pci0:6:0:0: class=0x030000 card=0x20001849 chip=0x20001a03 rev=0x21 hdr=0x00 vendor = 'ASPEED Technology, Inc.' device = 'ASPEED Graphics Family' class = display subclass = VGA igb0@pci0:7:0:0: class=0x020000 card=0x15331849 chip=0x15338086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet igb1@pci0:8:0:0: class=0x020000 card=0x15331849 chip=0x15338086 rev=0x03 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet ahci1@pci0:9:0:0: class=0x010601 card=0x92301849 chip=0x92301b4b rev=0x11 hdr=0x00 vendor = 'Marvell Technology Group Ltd.' class = mass storage subclass = SATA
dmesg:
Code:
Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.3-RELEASE-p12 #2 r275790+e006356: Thu Mar 26 17:28:49 PDT 2015 root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64 amd64 gcc version 4.2.1 20070831 patched [FreeBSD] CPU: Intel(R) Atom(TM) CPU C2750 @ 2.40GHz (2400.06-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x406d8 Family = 0x6 Model = 0x4d Stepping = 8 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x101<LAHF,Prefetch> Standard Extended Features=0x2282<TSCADJ,SMEP,ENHMOVSB> TSC: P-state invariant, performance statistics real memory = 17985175552 (17152 MB) avail memory = 16489648128 (15725 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <INTEL TIANO > FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 8 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 2 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 6 cpu4 (AP): APIC ID: 8 cpu5 (AP): APIC ID: 10 cpu6 (AP): APIC ID: 12 cpu7 (AP): APIC ID: 14 WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ACPI Warning: FADT (revision 5) is longer than ACPI 5.0 version, truncating length 268 to 256 (20111123/tbfadt-325) ioapic0 <Version 2.0> irqs 0-23 on motherboard ispfw: registered firmware <isp_1040> ispfw: registered firmware <isp_1040_it> ispfw: registered firmware <isp_1080> ispfw: registered firmware <isp_1080_it> ispfw: registered firmware <isp_12160> ispfw: registered firmware <isp_12160_it> ispfw: registered firmware <isp_2100> ispfw: registered firmware <isp_2200> ispfw: registered firmware <isp_2300> ispfw: registered firmware <isp_2322> ispfw: registered firmware <isp_2400> ispfw: registered firmware <isp_2400_multi> ispfw: registered firmware <isp_2500> ispfw: registered firmware <isp_2500_multi> kbd1 at kbdmux0 cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS> on motherboard padlock0: No ACE support. acpi0: <ALASKA A M I > on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> mem 0xdf740000-0xdf75ffff irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> mem 0xdf720000-0xdf73ffff irq 20 at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> mem 0xdf500000-0xdf51ffff irq 22 at device 0.0 on pci2 pci3: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> irq 23 at device 1.0 on pci3 pci4: <PCI bus> on pcib4 ahci0: <Marvell 88SE9172 AHCI SATA controller> port 0xc040-0xc047,0xc030-0xc033,0xc020-0xc027,0xc010-0xc013,0xc000-0xc00f mem 0xdf410000-0xdf4101ff irq 23 at device 0.0 on pci4 ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 pcib5: <PCI-PCI bridge> irq 23 at device 5.0 on pci3 pci5: <PCI bus> on pcib5 pcib6: <PCI-PCI bridge> irq 23 at device 0.0 on pci5 pci6: <PCI bus> on pcib6 vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 23 at device 0.0 on pci6 vgapci0: Boot video device pcib7: <PCI-PCI bridge> irq 21 at device 7.0 on pci3 pci7: <PCI bus> on pcib7 igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xa000-0xa01f mem 0xdf300000-0xdf37ffff,0xdf380000-0xdf383fff irq 21 at device 0.0 on pci7 igb0: Using MSIX interrupts with 5 vectors igb0: Ethernet address: d0:50:99:50:44:ab igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 pcib8: <PCI-PCI bridge> irq 23 at device 9.0 on pci3 pci8: <PCI bus> on pcib8 igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0x9000-0x901f mem 0xdf200000-0xdf27ffff,0xdf280000-0xdf283fff irq 23 at device 0.0 on pci8 igb1: Using MSIX interrupts with 5 vectors igb1: Ethernet address: d0:50:99:50:44:ac igb1: Bound queue 0 to cpu 4 igb1: Bound queue 1 to cpu 5 igb1: Bound queue 2 to cpu 6 igb1: Bound queue 3 to cpu 7 pcib9: <ACPI PCI-PCI bridge> mem 0xdf700000-0xdf71ffff at device 4.0 on pci0 pci9: <ACPI PCI bus> on pcib9 ahci1: <Marvell 88SE9230 AHCI SATA controller> port 0xd050-0xd057,0xd040-0xd043,0xd030-0xd037,0xd020-0xd023,0xd000-0xd01f mem 0xdf610000-0xdf6107ff irq 23 at device 0.0 on pci9 ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported ahci1: quirks=0x900<NOBSYRES,ALTSIG> ahcich2: <AHCI channel> at channel 0 on ahci1 ahcich3: <AHCI channel> at channel 1 on ahci1 ahcich4: <AHCI channel> at channel 2 on ahci1 ahcich5: <AHCI channel> at channel 3 on ahci1 ahcich6: <AHCI channel> at channel 4 on ahci1 ahcich7: <AHCI channel> at channel 5 on ahci1 ahcich8: <AHCI channel> at channel 6 on ahci1 ahcich9: <AHCI channel> at channel 7 on ahci1 ehci0: <Intel Avoton USB 2.0 controller> mem 0xdf763000-0xdf7633ff irq 23 at device 22.0 on pci0 usbus0: EHCI version 1.0 usbus0 on ehci0 ahci2: <Intel Avoton AHCI SATA controller> port 0xe0d0-0xe0d7,0xe0c0-0xe0c3,0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe040-0xe05f mem 0xdf762000-0xdf7627ff irq 19 at device 23.0 on pci0 ahci2: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported ahcich10: <AHCI channel> at channel 0 on ahci2 ahcich11: <AHCI channel> at channel 1 on ahci2 ahcich12: <AHCI channel> at channel 2 on ahci2 ahcich13: <AHCI channel> at channel 3 on ahci2 ahci3: <Intel Avoton AHCI SATA controller> port 0xe090-0xe097,0xe080-0xe083,0xe070-0xe077,0xe060-0xe063,0xe020-0xe03f mem 0xdf761000-0xdf7617ff irq 19 at device 24.0 on pci0 ahci3: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported ahcich14: <AHCI channel> at channel 0 on ahci3 ahcich15: <AHCI channel> at channel 1 on ahci3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart2: <16550 or compatible> port 0x248-0x24f irq 3 on acpi0 orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: CGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] wbwd0: DevID 0xc3 DevRev 0x33, will not attach, please report this. coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 est1: <Enhanced SpeedStep Frequency Control> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 est2: <Enhanced SpeedStep Frequency Control> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 est3: <Enhanced SpeedStep Frequency Control> on cpu3 coretemp4: <CPU On-Die Thermal Sensors> on cpu4 est4: <Enhanced SpeedStep Frequency Control> on cpu4 coretemp5: <CPU On-Die Thermal Sensors> on cpu5 est5: <Enhanced SpeedStep Frequency Control> on cpu5 coretemp6: <CPU On-Die Thermal Sensors> on cpu6 est6: <Enhanced SpeedStep Frequency Control> on cpu6 coretemp7: <CPU On-Die Thermal Sensors> on cpu7 est7: <Enhanced SpeedStep Frequency Control> on cpu7 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled usbus0: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 uhub0: 8 ports with 8 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0 uhub1: 4 ports with 4 removable, self powered ugen0.3: <CP1000PFCLCD> at usbus0 ugen0.4: <ADATA> at usbus0 umass0: <ADATA ADATA USB Flash Drive, class 0/0, rev 2.10/11.00, addr 4> on usbus0 umass0: SCSI over Bulk-Only; quirks = 0x0100 umass0:17:0:-1: Attached to scbus17 ugen0.5: <American Megatrends Inc.> at usbus0 uhub2: <7-port Hub> on usbus0 uhub2: 5 ports with 5 removable, self powered ugen0.6: <American Megatrends Inc.> at usbus0 ukbd0: <Keyboard Interface> on usbus0 kbd2 at ukbd0 ums0: <Mouse Interface> on usbus0 ums0: 3 buttons and [Z] coordinates ID=0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9da0 at umass-sim0 bus 0 scbus17 target 0 lun 0 da0: <ADATA USB Flash Drive 1100> Removable Direct Access SCSI-6 device da0: Serial Number 14730205323400EF da0: 40.000MB/s transfers da0: 14800MB (30310400 512 byte sectors: 255H 63S/T 1886C) da0: quirks=0x2<NO_6_BYTE> SATA 3.x device ada0: Serial Number WD-WCC4MCYPDUY3 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 ada1 at ahcich1 bus 0 scbus1 target 0 lun 0 ada1: <WDC WD20EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device ada1: Serial Number WD-WMC4M1219116 ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada1: quirks=0x1<4K> ada1: Previously was known as ad6 ada2 at ahcich2 bus 0 scbus2 target 0 lun 0 ada2: <WDC WD20EFRX-68EUZN0 80.00A80> ATA-9 SATA 3.x device ada2: Serial Number WD-WMC4M2475126 ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada2: Command Queueing enabled ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada2: quirks=0x1<4K> ada2: Previously was known as ad8 ada3 at ahcich3 bus 0 scbus3 target 0 lun 0 ada3: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device ada3: Serial Number WD-WCC4MHTU34PJ ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada3: Command Queueing enabled ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada3: quirks=0x1<4K> ada3: Previously was known as ad10 ada4 at ahcich4 bus 0 scbus4 target 0 lun 0 ada4: <SAMSUNG HD204UI 1AQ10001> ATA-8 SATA 2.x device ada4: Serial Number S2H7JD1B305642 ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada4: Command Queueing enabled ada4: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada4: quirks=0x1<4K> ada4: Previously was known as ad12 ada5 at ahcich5 bus 0 scbus5 target 0 lun 0 ada5: <SAMSUNG HD204UI 1AQ10001> ATA-8 SATA 2.x device ada5: Serial Number S2H7JD1ZA18179 ada5: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada5: Command Queueing enabled ada5: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada5: quirks=0x1<4K> ada5: Previously was known as ad14 ada6 at ahcich14 bus 0 scbus14 target 0 lun 0 ada6: <WDC WD20EFRX-68EUZN0 82.00A82> ATA-9 SATA 3.x device ada6: Serial Number WD-WCC4MLXJRKPA ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada6: Command Queueing enabled ada6: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada6: quirks=0x1<4K> ada6: Previously was known as ad32 ada7 at ahcich15 bus 0 scbus15 target 0 lun 0 ada7: <SAMSUNG HD204UI 1AQ10001> ATA-8 SATA 2.x device ada7: Serial Number S2H7J1PB404164 ada7: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada7: Command Queueing enabled ada7: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C) ada7: quirks=0x1<4K> ada7: Previously was known as ad34 pass6 at ahcich9 bus 0 scbus9 target 0 lun 0 pass6: <Marvell Console 1.01> Removable Processor SCSI-0 device pass6: Serial Number HKDP221516WL pass6: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) SMP: AP CPU #2 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #4 Launched! Timecounter "TSC-low" frequency 1200029172 Hz quality 1000 Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201503270027 []... GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi ipmi0: IPMI device rev. 1, firmware rev. 0.23, version 2.0 ipmi0: Number of channels 2 ipmi0: Attached watchdog wbwd0: DevID 0xc3 DevRev 0x33, will not attach, please report this. GEOM_ELI: Device ada7p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada1p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada2p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada3p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada4p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada5p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada6p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware GEOM_ELI: Device ada0p1.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware nfsd: can't register svc name vboxdrv: fAsync=0 offMin=0x690 offMax=0x14b8 pid 1967 (syslog-ng), uid 0: exited on signal 6 (core dumped)
sysctl kern.geom.disk:
Code:
kern.geom.disk.da0.led: kern.geom.disk.ada0.led: kern.geom.disk.ada1.led: kern.geom.disk.ada2.led: kern.geom.disk.ada3.led: kern.geom.disk.ada4.led: kern.geom.disk.ada5.led: kern.geom.disk.ada6.led: kern.geom.disk.ada7.led: