After updating to FreeNAS 11.0 Stable, can't open the service menu [Control Services]

[NgM Dat]

Hi Guys,
After updatting to FreeNAS 11.0 Stable from FreeNAS 9.10 Stable,
I can't open the service menu [Control Services]...
Thanks any advice.

My FNBox:
ASRock C2550D4I MiniITX
CFD DDR3 PC3-12800 CL9 32GB
WD HDD 2TB Blue WD20EZRZ/AFP / 5,400rpm / SATA3.0 x 7
Boot Disk SANDISK SSD Plus 120GB

 

[SweetAndLow]

Error message? Did you file a bug?

Sent from my Nexus 5X using Tapatalk

 

[SweetAndLow]

Clean cookies, try different browser, try private mode? Maybe bad boot media?

Sent from my Nexus 5X using Tapatalk

 

[NgM Dat]

Hi SweetAndLow,
the log message just following:

Code:

...
May 5 12:03:27 nas1 GEOM_ELI: Device ada2p1.eli created.
May 5 12:03:27 nas1 GEOM_ELI: Encryption: AES-XTS 128
May 5 12:03:27 nas1 GEOM_ELI:	 Crypto: hardware
May 5 12:03:27 nas1 GEOM_ELI: Device ada3p1.eli created.
May 5 12:03:27 nas1 GEOM_ELI: Encryption: AES-XTS 128
May 5 12:03:27 nas1 GEOM_ELI:	 Crypto: hardware
May 5 12:03:27 nas1 GEOM_ELI: Device ada4p1.eli created.
May 5 12:03:27 nas1 GEOM_ELI: Encryption: AES-XTS 128
May 5 12:03:27 nas1 GEOM_ELI:	 Crypto: hardware
May 5 12:03:27 nas1 GEOM_ELI: Device ada5p1.eli created.
May 5 12:03:27 nas1 GEOM_ELI: Encryption: AES-XTS 128
May 5 12:03:27 nas1 GEOM_ELI:	 Crypto: hardware
May 5 12:03:27 nas1 GEOM_ELI: Device ada6p1.eli created.
May 5 12:03:27 nas1 GEOM_ELI: Encryption: AES-XTS 128
May 5 12:03:27 nas1 GEOM_ELI:	 Crypto: hardware

May 5 12:03:29 nas1 root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
May 5 12:03:29 nas1 ntpd[2178]: ntpd 4.2.8p10-a (1): Starting

 

[NgM Dat]

Clean cookies, try different browser, try private mode? Maybe bad boot media?

Sent from my Nexus 5X using Tapatalk

I deleted all cache, cookies of chrome, IE, firefox,
but it doesn't make change this issue.

 

[NgM Dat]

Maybe i have to turn back to FreeNAS 9.10-STABLE at this time.
Even Though the FreeNAS.11-STABLE train was created.
It make me recall that at last summer 2016, when I got on the FreeNAS10 train.
This issue was closed,
Thanks for all mention.

 

[FreeNASftw]

There's an 11 stable?

 

[NgM Dat]

So sorry, It's still FreeNAS 11-RC in FreeNAS.11-STABLE train.
I think i have to cool-down after Fever of FreeNAS10.

 

[Osiris]

Still. Same issue here. 1 nas on FN11 nightlies, 1 nas on FN11 stable.
The ever loading... screen

Just retried it on never-used iexplore in W10. Same issue.

 

[NgM Dat]

I think that it was fixed now in FreeNAS 11.0 - RC3

 

[Osiris]

indeed confirmed. Just upgraded this weekend, both stable & nightlies.

 

[NgM Dat]

Today, as announcement of FreeNAS11.0 Release,
i upgrade my FreeNAS11.0 RC3 to FreeNAS11.0 Release.
After testing for new release, I known that when i access FN11.0 Release
from terminal place at other segment local network,
ex:
FreeNAS11.0 Release (192.168.1.x/24)
Access Terminal (192.168.2.x/24)

1) with legacy UI, can not open the service menu "Control Services"
2) can not open the login screen with new UI (as attachement image)

I think that above these two access were using the port that was different with 80, weren't they ?

 

[luciusf]

Hi,

I'm experiencing the same problem.

If accessed via Win10 (Firefox, Chrome, Edge) the services menu in the standard UI on FN11.0 stable doesn't open.
Also the new UI won't open as well (like the comment before noted).

However, if accessed via Safari both works.

An old openbsd machine with firefox could not open the services menu, but access the new ui.

Being a new FreeNAS user I'm not familiar with where to look for the correct logs, /var/log/ doesn't reveal anything useful to me.
Thankful for any hint.

 

[Mihalich]

I have the same problem.

 

[SweetAndLow]

I have the same problem.

File a bug.

Sent from my Nexus 5X using Tapatalk

 

[jclendineng]

Its a known issue, a lot of people had that issue and still have it. Will probably be fixed in the next update. It works probably 10 percent of the time, been that way since the RC days.

 

[Ericloewe]

I find this weird, because it's worked fine for me on Edge and Firefox.

 

[Mihalich]

Firefox 54.0 (32-bit) and IE 11.0.9600.18665, Win7 x64 Pro SP1 Does not work normally.
Log:

Code:

Jun 28 08:19:35 freenas collectd[4774]: utils_vl_lookup: The user object callback failed with status 2.
Jun 28 08:28:00 freenas shutdown: reboot by root:
Jun 28 08:28:02 freenas syslog-ng[63899]: syslog-ng starting up; version='3.7.3'
Jun 28 08:28:02 freenas kernel: pid 2139 (syslog-ng), uid 0: exited on signal 6 (core dumped)
Jun 28 08:28:03 freenas ntpd[2963]: ntpd exiting on signal 15 (Terminated)
Jun 28 08:28:04 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 28 08:28:04 freenas python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Jun 28 08:28:04 freenas syslog-ng[63899]: syslog-ng shutting down; version='3.7.3'
Jun 28 08:30:16 freenas syslog-ng[2131]: syslog-ng starting up; version='3.7.3'
Jun 28 08:30:16 freenas Waiting (max 60 seconds) for system process `vnlru' to stop... done
Jun 28 08:30:16 freenas Waiting (max 60 seconds) for system process `bufdaemon' to stop... done
Jun 28 08:30:16 freenas Waiting (max 60 seconds) for system process `syncer' to stop...
Jun 28 08:30:16 freenas Syncing disks, vnodes remaining... 0 0 0 0 done
Jun 28 08:30:16 freenas All buffers synced.
Jun 28 08:30:16 freenas Copyright (c) 1992-2017 The FreeBSD Project.
Jun 28 08:30:16 freenas Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jun 28 08:30:16 freenas	The Regents of the University of California. All rights reserved.
Jun 28 08:30:16 freenas FreeBSD is a registered trademark of The FreeBSD Foundation.
Jun 28 08:30:16 freenas FreeBSD 11.0-STABLE #0 r313908+f4b711d1be8(freenas/11.0-stable): Tue Jun 13 19:17:29 UTC 2017
Jun 28 08:30:16 freenas root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
Jun 28 08:30:16 freenas FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
Jun 28 08:30:16 freenas CPU: Intel(R) Xeon(R) CPU E3-1225 v5 @ 3.30GHz (3312.11-MHz K8-class CPU)
Jun 28 08:30:16 freenas Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
Jun 28 08:30:16 freenas Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Jun 28 08:30:16 freenas Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Jun 28 08:30:16 freenas AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Jun 28 08:30:16 freenas AMD Features2=0x121<LAHF,ABM,Prefetch>
Jun 28 08:30:16 freenas Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Jun 28 08:30:16 freenas XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Jun 28 08:30:16 freenas VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Jun 28 08:30:16 freenas TSC: P-state invariant, performance statistics
Jun 28 08:30:16 freenas real memory  = 18765316096 (17896 MB)
Jun 28 08:30:16 freenas avail memory = 16454754304 (15692 MB)
Jun 28 08:30:16 freenas Event timer "LAPIC" quality 600
Jun 28 08:30:16 freenas ACPI APIC Table: < >
Jun 28 08:30:16 freenas FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Jun 28 08:30:16 freenas FreeBSD/SMP: 1 package(s) x 4 core(s)
Jun 28 08:30:16 freenas WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Jun 28 08:30:16 freenas ioapic0 <Version 2.0> irqs 0-119 on motherboard
Jun 28 08:30:16 freenas random: entropy device external interface
Jun 28 08:30:16 freenas kbd1 at kbdmux0
Jun 28 08:30:16 freenas random: registering fast source Intel Secure Key RNG
Jun 28 08:30:16 freenas random: fast provider: "Intel Secure Key RNG"
Jun 28 08:30:16 freenas nexus0
Jun 28 08:30:16 freenas cryptosoft0: <software crypto> on motherboard
Jun 28 08:30:16 freenas aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
Jun 28 08:30:16 freenas padlock0: No ACE support.
Jun 28 08:30:16 freenas acpi0: <SUPERM SUPERM> on motherboard
Jun 28 08:30:16 freenas acpi0: Power Button (fixed)
Jun 28 08:30:16 freenas cpu0: <ACPI CPU> on acpi0
Jun 28 08:30:16 freenas cpu1: <ACPI CPU> on acpi0
Jun 28 08:30:16 freenas cpu2: <ACPI CPU> on acpi0
Jun 28 08:30:16 freenas cpu3: <ACPI CPU> on acpi0
Jun 28 08:30:16 freenas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Jun 28 08:30:16 freenas Timecounter "HPET" frequency 24000000 Hz quality 950
Jun 28 08:30:16 freenas Event timer "HPET" frequency 24000000 Hz quality 550
Jun 28 08:30:16 freenas Event timer "HPET1" frequency 24000000 Hz quality 440
Jun 28 08:30:16 freenas Event timer "HPET2" frequency 24000000 Hz quality 440
Jun 28 08:30:16 freenas Event timer "HPET3" frequency 24000000 Hz quality 440
Jun 28 08:30:16 freenas Event timer "HPET4" frequency 24000000 Hz quality 440
Jun 28 08:30:16 freenas atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Jun 28 08:30:16 freenas atrtc0: Warning: Couldn't map I/O.
Jun 28 08:30:16 freenas Event timer "RTC" frequency 32768 Hz quality 0
Jun 28 08:30:16 freenas attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Jun 28 08:30:16 freenas Timecounter "i8254" frequency 1193182 Hz quality 0
Jun 28 08:30:16 freenas Event timer "i8254" frequency 1193182 Hz quality 100
Jun 28 08:30:16 freenas Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Jun 28 08:30:16 freenas acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
Jun 28 08:30:16 freenas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jun 28 08:30:16 freenas pci0: <ACPI PCI bus> on pcib0
Jun 28 08:30:16 freenas vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xd0000000-0xd7ffffff irq 16 at device 2.0 on pci0
Jun 28 08:30:16 freenas vgapci0: Boot video device
Jun 28 08:30:16 freenas xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf230000-0xdf23ffff irq 16 at device 20.0 on pci0
Jun 28 08:30:16 freenas xhci0: 32 bytes context size, 64-bit DMA
Jun 28 08:30:16 freenas usbus0: waiting for BIOS to give up control
Jun 28 08:30:16 freenas usbus0 on xhci0
Jun 28 08:30:16 freenas pci0: <simple comms> at device 22.0 (no driver attached)
Jun 28 08:30:16 freenas ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf248000-0xdf249fff,0xdf24d000-0xdf24d0ff,0xdf24c000-0xdf24c7ff irq 16 at device 23.0 on pci0
Jun 28 08:30:16 freenas ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
Jun 28 08:30:16 freenas ahcich0: <AHCI channel> at channel 0 on ahci0
Jun 28 08:30:16 freenas ahcich1: <AHCI channel> at channel 1 on ahci0
Jun 28 08:30:16 freenas ahcich2: <AHCI channel> at channel 2 on ahci0
Jun 28 08:30:16 freenas ahcich3: <AHCI channel> at channel 3 on ahci0
Jun 28 08:30:16 freenas ahcich4: <AHCI channel> at channel 4 on ahci0
Jun 28 08:30:16 freenas ahcich5: <AHCI channel> at channel 5 on ahci0
Jun 28 08:30:16 freenas ahcich6: <AHCI channel> at channel 6 on ahci0
Jun 28 08:30:16 freenas ahcich7: <AHCI channel> at channel 7 on ahci0
Jun 28 08:30:16 freenas pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Jun 28 08:30:16 freenas pci1: <ACPI PCI bus> on pcib1
Jun 28 08:30:16 freenas xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf100000-0xdf107fff irq 16 at device 0.0 on pci1
Jun 28 08:30:16 freenas xhci1: 32 bytes context size, 64-bit DMA
Jun 28 08:30:16 freenas xhci1: Unable to map MSI-X table
Jun 28 08:30:16 freenas usbus1 on xhci1
Jun 28 08:30:16 freenas pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
Jun 28 08:30:16 freenas pci2: <ACPI PCI bus> on pcib2
Jun 28 08:30:16 freenas pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
Jun 28 08:30:16 freenas pci3: <ACPI PCI bus> on pcib3
Jun 28 08:30:16 freenas pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
Jun 28 08:30:16 freenas pci4: <ACPI PCI bus> on pcib4
Jun 28 08:30:16 freenas igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdf000000-0xdf07ffff,0xdf080000-0xdf083fff irq 16 at device 0.0 on pci4
Jun 28 08:30:16 freenas igb0: Using MSIX interrupts with 5 vectors
Jun 28 08:30:16 freenas igb0: Ethernet address: 0c:c4:7a:e5:a2:a5
Jun 28 08:30:16 freenas igb0: Bound queue 0 to cpu 0
Jun 28 08:30:16 freenas igb0: Bound queue 1 to cpu 1
Jun 28 08:30:16 freenas igb0: Bound queue 2 to cpu 2
Jun 28 08:30:16 freenas igb0: Bound queue 3 to cpu 3
Jun 28 08:30:16 freenas pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
Jun 28 08:30:16 freenas pci5: <ACPI PCI bus> on pcib5
Jun 28 08:30:16 freenas isab0: <PCI-ISA bridge> at device 31.0 on pci0
Jun 28 08:30:16 freenas isa0: <ISA bus> on isab0
Jun 28 08:30:16 freenas pci0: <memory> at device 31.2 (no driver attached)
Jun 28 08:30:16 freenas pci0: <multimedia, HDA> at device 31.3 (no driver attached)
Jun 28 08:30:16 freenas em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdf200000-0xdf21ffff irq 16 at device 31.6 on pci0
Jun 28 08:30:16 freenas em0: Using an MSI interrupt
Jun 28 08:30:16 freenas em0: Ethernet address: 0c:c4:7a:e5:a2:a4
Jun 28 08:30:16 freenas acpi_button0: <Sleep Button> on acpi0
Jun 28 08:30:16 freenas acpi_button1: <Power Button> on acpi0
Jun 28 08:30:16 freenas acpi_tz0: <Thermal Zone> on acpi0
Jun 28 08:30:16 freenas acpi_tz1: <Thermal Zone> on acpi0
Jun 28 08:30:16 freenas wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0
Jun 28 08:30:16 freenas sc0: <System console> at flags 0x100 on isa0
Jun 28 08:30:16 freenas sc0: VGA <16 virtual consoles, flags=0x300>
Jun 28 08:30:16 freenas vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jun 28 08:30:16 freenas coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Jun 28 08:30:16 freenas est0: <Enhanced SpeedStep Frequency Control> on cpu0
Jun 28 08:30:16 freenas coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Jun 28 08:30:16 freenas est1: <Enhanced SpeedStep Frequency Control> on cpu1
Jun 28 08:30:16 freenas coretemp2: <CPU On-Die Thermal Sensors> on cpu2
Jun 28 08:30:16 freenas est2: <Enhanced SpeedStep Frequency Control> on cpu2
Jun 28 08:30:16 freenas coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Jun 28 08:30:16 freenas est3: <Enhanced SpeedStep Frequency Control> on cpu3
Jun 28 08:30:16 freenas ZFS filesystem version: 5
Jun 28 08:30:16 freenas ZFS storage pool version: features support (5000)
Jun 28 08:30:16 freenas Timecounters tick every 1.000 msec
Jun 28 08:30:16 freenas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Jun 28 08:30:16 freenas nvme cam probe device init
Jun 28 08:30:16 freenas usbus0: 5.0Gbps Super Speed USB v3.0
Jun 28 08:30:16 freenas usbus1: 5.0Gbps Super Speed USB v3.0
Jun 28 08:30:16 freenas ugen0.1: <0x8086 XHCI root HUB> at usbus0
Jun 28 08:30:16 freenas uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Jun 28 08:30:16 freenas ugen1.1: <0x1b21 XHCI root HUB> at usbus1
Jun 28 08:30:16 freenas uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
Jun 28 08:30:16 freenas uhub1: 4 ports with 4 removable, self powered
Jun 28 08:30:16 freenas usb_alloc_device: set address 2 failed (USB_ERR_IOERROR, ignored)
Jun 28 08:30:16 freenas uhub0: 26 ports with 26 removable, self powered
Jun 28 08:30:16 freenas ugen0.2: <No brand KVM A1> at usbus0
Jun 28 08:30:16 freenas ukbd0 on uhub0
Jun 28 08:30:16 freenas ukbd0: <No brand KVM A1, class 0/0, rev 1.10/0.00, addr 1> on usbus0
Jun 28 08:30:16 freenas kbd0 at ukbd0
Jun 28 08:30:16 freenas ugen0.3: <Kingston DataTraveler 3.0> at usbus0
Jun 28 08:30:16 freenas umass0 on uhub0
Jun 28 08:30:16 freenas umass0: <Kingston DataTraveler 3.0, class 0/0, rev 3.00/0.01, addr 2> on usbus0
Jun 28 08:30:16 freenas umass0:  SCSI over Bulk-Only; quirks = 0xc100
Jun 28 08:30:16 freenas umass0:9:0: Attached to scbus9
Jun 28 08:30:16 freenas ugen1.2: <Kingston DataTraveler 3.0> at usbus1
Jun 28 08:30:16 freenas umass1 on uhub1
Jun 28 08:30:16 freenas umass1: <Kingston DataTraveler 3.0, class 0/0, rev 3.00/0.01, addr 1> on usbus1
Jun 28 08:30:16 freenas umass1:  SCSI over Bulk-Only; quirks = 0xc101
Jun 28 08:30:16 freenas umass1:10:1: Attached to scbus10
Jun 28 08:30:16 freenas ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Jun 28 08:30:16 freenas ada0: <WDC WD1004FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
Jun 28 08:30:16 freenas ada0: Serial Number WD-WMC6M0D7K999
Jun 28 08:30:16 freenas cd0 at ahcich7 bus 0 scbus7 target 0 lun 0
Jun 28 08:30:16 freenas cd0: <Optiarc DVD RW AD-7240S 1.02> Removable CD-ROM SCSI device
Jun 28 08:30:16 freenas cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
Jun 28 08:30:16 freenas cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Jun 28 08:30:16 freenas ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Jun 28 08:30:16 freenas ada0: Command Queueing enabled
Jun 28 08:30:16 freenas ada0: 953869MB (1953525168 512 byte sectors)
Jun 28 08:30:16 freenas ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Jun 28 08:30:16 freenas ada1: <WDC WD1004FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
Jun 28 08:30:16 freenas ada1: Serial Number WD-WMC6M0D6MPWA
Jun 28 08:30:16 freenas ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Jun 28 08:30:16 freenas ada1: Command Queueing enabled
Jun 28 08:30:16 freenas ada1: 953869MB (1953525168 512 byte sectors)
Jun 28 08:30:16 freenas ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
Jun 28 08:30:16 freenas ada2: <WDC WD1004FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
Jun 28 08:30:16 freenas ada2: Serial Number WD-WMC6N0F3W28C
Jun 28 08:30:16 freenas ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Jun 28 08:30:16 freenas ada2: Command Queueing enabled
Jun 28 08:30:16 freenas ada2: 953869MB (1953525168 512 byte sectors)
Jun 28 08:30:16 freenas ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
Jun 28 08:30:16 freenas ada3: <WDC WD1004FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
Jun 28 08:30:16 freenas ada3: Serial Number WD-WMC6M0D99N5M
Jun 28 08:30:16 freenas ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Jun 28 08:30:16 freenas ada3: Command Queueing enabled
Jun 28 08:30:16 freenas ada3: 953869MB (1953525168 512 byte sectors)
Jun 28 08:30:16 freenas ada4 at ahcich4 bus 0 scbus4 target 0 lun 0
Jun 28 08:30:16 freenas ada4: <WDC WD1004FBYZ-01YCBB1 RR04> ACS-3 ATA SATA 3.x device
Jun 28 08:30:16 freenas ada4: Serial Number WD-WMC6M0D0P1N6
Jun 28 08:30:16 freenas ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Jun 28 08:30:16 freenas ada4: Command Queueing enabled
Jun 28 08:30:16 freenas ada4: 953869MB (1953525168 512 byte sectors)
Jun 28 08:30:16 freenas da1 at umass-sim1 bus 1 scbus10 target 0 lun 0
Jun 28 08:30:16 freenas da1: <Kingston DataTraveler 3.0 > Removable Direct Access SPC-4 SCSI device
Jun 28 08:30:16 freenas da1: Serial Number 20CF30E118F3F081D6382908
Jun 28 08:30:16 freenas da1: 400.000MB/s transfers
Jun 28 08:30:16 freenas da1: 14755MB (30218842 512 byte sectors)
Jun 28 08:30:16 freenas da1: quirks=0x2<NO_6_BYTE>
Jun 28 08:30:16 freenas da0 at umass-sim0 bus 0 scbus9 target 0 lun 0
Jun 28 08:30:16 freenas da0: <Kingston DataTraveler 3.0 > Removable Direct Access SPC-4 SCSI device
Jun 28 08:30:16 freenas da0: Serial Number D067E516450CF081D61648EB
Jun 28 08:30:16 freenas da0: 400.000MB/s transfers
Jun 28 08:30:16 freenas da0: 14755MB (30218842 512 byte sectors)
Jun 28 08:30:16 freenas da0: quirks=0x2<NO_6_BYTE>
Jun 28 08:30:16 freenas random: unblocking device.
Jun 28 08:30:16 freenas SMP: AP CPU #1 Launched!
Jun 28 08:30:16 freenas SMP: AP CPU #2 Launched!
Jun 28 08:30:16 freenas SMP: AP CPU #3 Launched!
Jun 28 08:30:16 freenas Timecounter "TSC-low" frequency 1656056939 Hz quality 1000
Jun 28 08:30:16 freenas Trying to mount root from zfs:freenas-boot/ROOT/default []...
Jun 28 08:30:16 freenas GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
Jun 28 08:30:16 freenas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/8/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
Jun 28 08:30:16 freenas kernel: lagg0: link state changed to DOWN
Jun 28 08:30:16 freenas kernel: lagg0: link state changed to DOWN
Jun 28 08:30:16 freenas ums0 on uhub0
Jun 28 08:30:16 freenas ums0: <No brand KVM A1, class 0/0, rev 1.10/0.00, addr 1> on usbus0
Jun 28 08:30:16 freenas ums0: 5 buttons and [XYZ] coordinates ID=1
Jun 28 08:30:16 freenas kernel: igb0: link state changed to UP
Jun 28 08:30:16 freenas kernel: igb0: link state changed to UP
Jun 28 08:30:16 freenas kernel: lagg0: link state changed to UP
Jun 28 08:30:16 freenas kernel: lagg0: link state changed to UP
Jun 28 08:30:16 freenas kernel: em0: link state changed to UP
Jun 28 08:30:16 freenas kernel: em0: link state changed to UP
Jun 28 08:30:17 freenas GEOM_ELI: Device ada0p1.eli created.
Jun 28 08:30:17 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 28 08:30:17 freenas GEOM_ELI:  Crypto: hardware
Jun 28 08:30:17 freenas GEOM_ELI: Device ada1p1.eli created.
Jun 28 08:30:17 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 28 08:30:17 freenas GEOM_ELI:  Crypto: hardware
Jun 28 08:30:17 freenas GEOM_ELI: Device ada2p1.eli created.
Jun 28 08:30:17 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 28 08:30:17 freenas GEOM_ELI:  Crypto: hardware
Jun 28 08:30:17 freenas GEOM_ELI: Device ada3p1.eli created.
Jun 28 08:30:17 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 28 08:30:17 freenas GEOM_ELI:  Crypto: hardware
Jun 28 08:30:17 freenas GEOM_ELI: Device ada4p1.eli created.
Jun 28 08:30:17 freenas GEOM_ELI: Encryption: AES-XTS 128
Jun 28 08:30:17 freenas GEOM_ELI:  Crypto: hardware
Jun 28 08:30:18 freenas ntpd[2954]: ntpd 4.2.8p10-a (1): Starting
Jun 28 08:30:30 freenas root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Jun 28 08:30:35 freenas root: /etc/rc: WARNING: failed precmd routine for minio
Jun 28 13:15:47 freenas collectd[4767]: aggregation plugin: Unable to read the current rate of "freenas.my.domain.com/cpu-2/cpu-user".
Jun 28 13:15:47 freenas collectd[4767]: utils_vl_lookup: The user object callback failed with status 2.

 

[green]

the same problem
found this report https://bugs.pcbsd.org/issues/23941
they were resolved the issue by the assigning the static IP (?!)
for me it is not working ((

updated: i'm using ff 52.2.1 esr
was trying use chrome and no luck to
system is windows 7 x64
after all i tried to use chrome on android and it worked!!!

 

[Mihalich]

My FreeNAS has a static IP, it also does not work.