8.0.1 RC1 boot error...

[enemy85]

Hi everybody,

FreeNAS 8.0.1 beta 2 AMD64 installed on:
MB Sapphire IPC-E350M1W PURE WHITE FUSION MINI-ITX (LAN chip Marvell 88E8059)
HDD 2xSEAGATE ST2000DL003 (mirroring)
RAM GEIL 4GB PC3 10660 1333MHz Value Plus 9-9-9 GVP34GB1333C9SC


Previously i had 8.0.1 beta2 and everything was ok. after i formatted my 2gb usb stick and installed on it the RC1.
At first everything was ok but when i reboot the nas then my problems start....

i get this



as the pc doesn't recognize the usb...

but if i take the usb out and put it in again it works...
is it normal i get 2 different partitions of the same size on the usb stick?

anybody can help me?

 

[chris8051]

I have boot freeze up problem on RC1 on Dell PE R710 when booting from USB. Gets as far as listing

F1 FreeBSD
F2 FreeBSD
F5 Drive 0

F6 PXE
Boot: F1

then locks up forever. I know the USB stick image is fine because I can boot it on a different desktop PC without problem. Something incompatible with Dell R710??

 

[enemy85]

That is exactly the same problem i have... :(
It happens that situation or the one i posted but is the same problem...
Did u figure out why? How can we solve?

 

[enemy85]

nobody here in the forum able to give us an explanation of the problem?

thanks...

 

[enemy85]

but i am the only one experiencing this problem on a E350M1W PURE WHITE FUSION MINI-ITX??? i don't know what to do...even with a bios update the booting loop problem keeps to run... :(