I have a few SATA disks on an HP H240 controller (not RAID) that require that I use smartctl or smartd with "-d sat" (or "-d sat,auto").
This works fine from the command line. Older versions of the smart tools also didn't require this option.
There is a box in Storage->Disks->(Select Disk)->Edit named "S.M.A.R.T. extra options" (see below).
However, for the disks that require this new argument, /etc/smartd.conf is not modified. If I do the same for a plain SATA disk, the argument takes.
Am I understanding this correctly, and should I post a bug report, or is there another way to achieve this? (I tried rebooting just in case)
Symptoms are no self test from the GUI, and no temp monitoring.
Thanks!
Generated /etc/smartd.conf (ignores the drives that need "-d sat"):
This works fine from the command line. Older versions of the smart tools also didn't require this option.
There is a box in Storage->Disks->(Select Disk)->Edit named "S.M.A.R.T. extra options" (see below).
However, for the disks that require this new argument, /etc/smartd.conf is not modified. If I do the same for a plain SATA disk, the argument takes.
Am I understanding this correctly, and should I post a bug report, or is there another way to achieve this? (I tried rebooting just in case)
Symptoms are no self test from the GUI, and no temp monitoring.
Thanks!
Generated /etc/smartd.conf (ignores the drives that need "-d sat"):
Code:
/dev/sdh -a -d removable -n never -W 0,0,0 -m root -M exec /usr/local/libexec/smart_alert.py\ -s S/../.././(06)\ /dev/sdi -a -d removable -n never -W 0,0,0 -m root -M exec /usr/local/libexec/smart_alert.py\ -s S/../.././(06)\
HP ProLiant MicroServer Gen10, 32GB ECC Memory, AMD Opteron X3421 APU 4 Core
HP 779134-001 726907-B21 H240 Smart Host Bus Adapter PCIe
Built-in single-port SATA
Intel X520-DA1 INTEL 10GB PCIE SFP+
2 * Seagate ST8000VN 8TB + 2 * WDC WD80EMAZ in RAIDz (all on HP H240)
2 * 100GB Intel SSDSC2 (mirrored) for logs (both on HP H240)
1 * ADATA SU720 480GB + 1 * TS480 GB (mirrored, one on HP H240, one on built-in SATA)
1 * LITEONIT LCS-256L9S-11 256GB SSD as boot on USB
HP 779134-001 726907-B21 H240 Smart Host Bus Adapter PCIe
Built-in single-port SATA
Intel X520-DA1 INTEL 10GB PCIE SFP+
2 * Seagate ST8000VN 8TB + 2 * WDC WD80EMAZ in RAIDz (all on HP H240)
2 * 100GB Intel SSDSC2 (mirrored) for logs (both on HP H240)
1 * ADATA SU720 480GB + 1 * TS480 GB (mirrored, one on HP H240, one on built-in SATA)
1 * LITEONIT LCS-256L9S-11 256GB SSD as boot on USB