Hello!
I have Freenas 9.10-U4 and some raid 0 virtual disks, that smartctl can detect correctly as /dev/passX. Can i configure smartd manually by the way, that will saved after updates or upgrades?
Now
I wanna
PS: I know that virtual disks and zfs it is not good way.
I have Freenas 9.10-U4 and some raid 0 virtual disks, that smartctl can detect correctly as /dev/passX. Can i configure smartd manually by the way, that will saved after updates or upgrades?
Now
Code:
[root@storsrv] ~# cat /usr/local/etc/smartd.conf ################################################ # smartd.conf generated by /etc/ix.rc.d/ix-smartd ################################################ /dev/mfid1 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid2 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid3 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid4 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid5 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid6 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid7 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid8 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py /dev/mfid9 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py
I wanna
Code:
[root@storsrv] ~# cat /usr/local/etc/smartd.conf /dev/pass0 -a -n never -W 0,0,0 -m root -M exec /usr/local/www/freenasUI/tools/smart_alert.py
PS: I know that virtual disks and zfs it is not good way.