Im still testing / trying FN (for the past 6 or 7 mo), and i have a 2nd test system (not my main test sys in sig) where im trying to debug some 10g performance issues. (so this system is just a fresh install on a usb stick of 11.2u4.1 , its only been running a signle SMB share with a single pool, and the SSH service).
all had been running fine, i delete my pool, and create a new one (with a different disk layout for my testing), and when i did that samba died, now samba wont start .
some output from CLI:
I dont really care about this problem (ie i can wipe and fresh install), but i want to know/figure out whats going on (so that once i actually deploy FN , ill know).
Im also now noticing these weird folder (or files?) when i was looking around the system (whats with the samba4.date folders ??):
dmesg has nothing relevant (nor /var/log/messages )
any ideas? im sure these xxx.date folders are related to my problem.
thanks
all had been running fine, i delete my pool, and create a new one (with a different disk layout for my testing), and when i did that samba died, now samba wont start .
some output from CLI:
Code:
root@freenas:/mnt # service samba_server start [: ==: unexpected operator install: stat /var/db/samba4: No such file or directory Performing sanity check on Samba configuration: FAILED root@freenas:/mnt # testparm mkdir failed on directory /var/db/samba4/private/msg.sock: No such file or directory Unable to initialize messaging context!
I dont really care about this problem (ie i can wipe and fresh install), but i want to know/figure out whats going on (so that once i actually deploy FN , ill know).
Im also now noticing these weird folder (or files?) when i was looking around the system (whats with the samba4.date folders ??):
Code:
root@freenas:/var/db # ls
collectd ipf ntpd.leap-seconds.list samba4 sudo
dhclient.leases.igb1 locate.database nut samba4.20190519192254 syslog-ng.ctl
entropy netdata pkg services.db syslog-ng.persist
freebsd-update ntp ports sss zfsd
hyperv ntpd.drift portsnap sss_mc zoneinfo
root@freenas:/var/db # cd samba4
samba4: No such file or directory.
root@freenas:/var/db # ls -l
total 2092
drwxr-xr-x 3 root wheel 64 May 20 22:53 collectd
---------- 1 root wheel 394 May 21 00:41 dhclient.leases.igb1
drwx------ 2 operator operator 0 May 18 18:56 entropy
drwx------ 2 root wheel 0 May 18 18:56 freebsd-update
drwx------ 2 root wheel 0 May 18 18:56 hyperv
drwx------ 2 root wheel 0 May 18 18:56 ipf
-rw-r--r-- 1 nobody wheel 0 May 18 18:53 locate.database
drwxr-x--- 3 netdata netdata 128 May 18 18:53 netdata
drwx------ 2 root wheel 0 May 18 18:56 ntp
-rw-r--r-- 1 root wheel 7 May 21 00:22 ntpd.drift
-rw-r--r-- 1 root wheel 10667 Mar 26 00:40 ntpd.leap-seconds.list
drwxrwx--- 2 root uucp 0 May 18 18:56 nut
drwxr-xr-x 2 root wheel 192 May 20 03:02 pkg
drwxr-xr-x 2 root wheel 0 May 18 18:56 ports
drwxr-xr-x 2 root wheel 0 May 18 18:56 portsnap
lrwxr-xr-x 1 root wheel 21 May 19 19:22 samba4 -> /var/db/system/samba4
drwxr-xr-x 3 root wheel 64 May 18 18:56 samba4.20190519192254
-rw-r--r-- 1 root wheel 2097920 May 18 18:53 services.db
drwxr-xr-x 2 root wheel 0 May 19 19:22 sss
drwxr-xr-x 2 root wheel 0 May 19 19:22 sss_mc
drwx--x--x 3 root wheel 64 May 18 18:56 sudo
srwxr-xr-x 1 root wheel 0 May 20 22:53 syslog-ng.ctl
-rw------- 1 root wheel 16384 May 21 00:38 syslog-ng.persist
drwxr-xr-x 3 root wheel 64 May 18 18:56 zfsd
-rw-r--r-- 1 root wheel 16 May 19 19:22 zoneinfo
root@freenas:/var/db # cd /var/db/system/samba4
/var/db/system/samba4: No such file or directory.
root@freenas:/var # ls
account backups empty log.20190519192250 preserve unbound
agentx cache games mail run yp
at crash heimdal md_size rwho
audit cron lib msgs spool
authpf db log netatalk tmp
root@freenas:/var #
root@freenas:/var # zpool status
pool: RDz2of7x
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
RDz2of7x ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/2b1feb42-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/2cff033f-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/2fc8dd45-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/326ebef2-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/35064082-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/37134c1d-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
gptid/3cc0d8bd-7b7f-11e9-99a3-ac1f6b75a66c ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
da7p2 ONLINE 0 0 0
errors: No known data errors
dmesg has nothing relevant (nor /var/log/messages )
root@freenas:/var # dmesg
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0 r325575+95cc58ca2a0(HEAD): Fri May 10 15:57:35 EDT 2019
root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) CPU D1508 @ 2.20GHz (2200.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50663 Family=0x6 Model=0x56 Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16444530688 (15682 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1100023378 Hz quality 1000
random: entropy device external interface
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci1
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 2.2 on pci1
ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20171214/nsprepkg-251)
pci5: <ACPI PCI bus> on pcib5
pcib5: no PRT entry for 4.0.INTA
pcib5: no PRT entry for 4.0.INTB
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 11 at device 0.0 on pci5
ix0: Using MSI-X interrupts with 5 vectors
ix0: Ethernet address: ac:1f:6b:75:a6:6c
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 10 at device 0.1 on pci5
ix1: Using MSI-X interrupts with 5 vectors
ix1: Ethernet address: ac:1f:6b:75:a6:6d
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci1
pci6: <ACPI PCI bus> on pcib6
mps0: <Avago Technologies (LSI) SAS2308> port 0xe000-0xe0ff mem 0xfb340000-0xfb34ffff,0xfb300000-0xfb33ffff irq 16 at device 0.0 on pci6
mps0: Firmware: 15.00.00.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 3.2 on pci1
pci7: <ACPI PCI bus> on pcib7
t5nex0: <Chelsio T520-CR> mem 0xf9300000-0xf937ffff,0xf8000000-0xf8ffffff,0xf9884000-0xf9885fff irq 16 at device 0.4 on pci7
cxl0: <port 0> on t5nex0
cxl0: Ethernet address: 00:07:43:3c:4a:30
cxl0: 4 txq, 4 rxq (NIC); 4 txq, 2 rxq (TOE)
cxl1: <port 1> on t5nex0
cxl1: Ethernet address: 00:07:43:3c:4a:38
cxl1: 4 txq, 4 rxq (NIC); 4 txq, 2 rxq (TOE)
t5nex0: PCIe gen3 x8, 2 ports, 14 MSI-X interrupts, 31 eq, 13 iq
pci7: <mass storage, SCSI> at device 0.5 (no driver attached)
pci7: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf9900000-0xf990ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf9914000-0xf99143ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci8: <ACPI PCI bus> on pcib8
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xfb500000-0xfb57ffff,0xfb580000-0xfb583fff irq 16 at device 0.0 on pci8
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: ac:1f:6b:75:a5:3c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci1
pci9: <ACPI PCI bus> on pcib9
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xfb400000-0xfb47ffff,0xfb480000-0xfb483fff irq 17 at device 0.0 on pci9
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: ac:1f:6b:75:a5:3d
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci1
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 on pci11
vgapci0: Boot video device
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf9913000-0xf99133ff irq 18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf9912000-0xf99127ff irq 16 at device 31.2 on pci1
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ichwd0: <Intel Lynx Point watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xcf000-0xcffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ipmi0: IPMI device rev. 1, firmware rev. 3.68, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub3: MTT enabled
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub5 on uhub1
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub5: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub6 on uhub3
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
uhub6: MTT enabled
uhub6: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x0557 product 0x7000> at usbus0
uhub7 on uhub2
uhub7: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.5: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub7
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <ADATA ADATA USB Flash Drive> at usbus0
umass0 on uhub2
umass0: <ADATA ADATA USB Flash Drive, class 0/0, rev 3.10/10.75, addr 5> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0: Attached to scbus8
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <MB8000GEQUU HPG7> ACS-2 ATA SATA 3.x device
ada0: Serial Number VKH48AKX
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 7630885MB (15628053168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 14 lun 0
da0: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 2KV4K58A
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 190782MB (390721968 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 15 lun 0
da1: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number 2KV4KNXA
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 190782MB (390721968 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 16 lun 0
da2: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number 2KV4JHSA
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 190782MB (390721968 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 18 lun 0
da4: <HGST HUSMM1620ASS204 C300> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number 0PY2Z74A
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 190782MB (390721968 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 17 lun 0
da3: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number 2KV4K3AA
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 190782MB (390721968 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 19 lun 0
da5: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number 2KV4KNSA
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 190782MB (390721968 512 byte sectors)
da6 at mps0 bus 0 scbus0 target 20 lun 0
da6: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number 2KV4JWLA
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 190782MB (390721968 512 byte sectors)
da7 at umass-sim0 bus 0 scbus8 target 0 lun 0
da7: <ADATA USB Flash Drive 1.00> Removable Direct Access SPC-4 SCSI device
da7: Serial Number 27B2404420160059
da7: 400.000MB/s transfers
da7: 29600MB (60620800 512 byte sectors)
da7: quirks=0x2<NO_6_BYTE>
random: unblocking device.
Trying to mount root from zfs:freenas-boot/ROOT/default []...
igb1: link state changed to UP
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_MIRROR: Device mirror/swap2 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
cxl0: link state changed to DOWN
igb1: link state changed to DOWN
cxl0: link state changed to UP
igb1: link state changed to UP
ums0 on uhub7
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
cxl0: transceiver unplugged.
cxl0: link state changed to DOWN
cxl0: 10Gbps TWINAX transceiver inserted.
cxl0: link state changed to UP
cxl0: link state changed to DOWN
cxl0: link state changed to UP
GEOM_ELI: Device mirror/swap2.eli destroyed.
GEOM_MIRROR: Device swap2: provider destroyed.
GEOM_MIRROR: Device swap2 destroyed.
GEOM_ELI: Device mirror/swap1.eli destroyed.
GEOM_MIRROR: Device swap1: provider destroyed.
GEOM_MIRROR: Device swap1 destroyed.
GEOM_ELI: Device mirror/swap0.eli destroyed.
GEOM_MIRROR: Device swap0: provider destroyed.
GEOM_MIRROR: Device swap0 destroyed.
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_MIRROR: Device mirror/swap2 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-STABLE #0 r325575+95cc58ca2a0(HEAD): Fri May 10 15:57:35 EDT 2019
root@mp20.tn.ixsystems.com:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Pentium(R) CPU D1508 @ 2.20GHz (2200.05-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x50663 Family=0x6 Model=0x56 Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x21cbfbb<FSGSBASE,TSCADJ,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,PQM,NFPUSG,PQE,RDSEED,ADX,SMAP,PROCTRACE>
Structured Extended Features3=0x9c000000<IBPB,STIBP,SSBD>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16444530688 (15682 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1100023378 Hz quality 1000
random: entropy device external interface
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pcib0: _OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: _OSC returned error 0x10
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 1.1 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci1
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 2.2 on pci1
ACPI Warning: \134_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20171214/nsprepkg-251)
pci5: <ACPI PCI bus> on pcib5
pcib5: no PRT entry for 4.0.INTA
pcib5: no PRT entry for 4.0.INTB
ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xfbc00000-0xfbdfffff,0xfbe04000-0xfbe07fff irq 11 at device 0.0 on pci5
ix0: Using MSI-X interrupts with 5 vectors
ix0: Ethernet address: ac:1f:6b:75:a6:6c
ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xfba00000-0xfbbfffff,0xfbe00000-0xfbe03fff irq 10 at device 0.1 on pci5
ix1: Using MSI-X interrupts with 5 vectors
ix1: Ethernet address: ac:1f:6b:75:a6:6d
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci1
pci6: <ACPI PCI bus> on pcib6
mps0: <Avago Technologies (LSI) SAS2308> port 0xe000-0xe0ff mem 0xfb340000-0xfb34ffff,0xfb300000-0xfb33ffff irq 16 at device 0.0 on pci6
mps0: Firmware: 15.00.00.00, Driver: 21.02.00.00-fbsd
mps0: IOCCapabilities: 1a85c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,MSIXIndex,HostDisc>
pcib7: <ACPI PCI-PCI bridge> irq 16 at device 3.2 on pci1
pci7: <ACPI PCI bus> on pcib7
t5nex0: <Chelsio T520-CR> mem 0xf9300000-0xf937ffff,0xf8000000-0xf8ffffff,0xf9884000-0xf9885fff irq 16 at device 0.4 on pci7
cxl0: <port 0> on t5nex0
cxl0: Ethernet address: 00:07:43:3c:4a:30
cxl0: 4 txq, 4 rxq (NIC); 4 txq, 2 rxq (TOE)
cxl1: <port 1> on t5nex0
cxl1: Ethernet address: 00:07:43:3c:4a:38
cxl1: 4 txq, 4 rxq (NIC); 4 txq, 2 rxq (TOE)
t5nex0: PCIe gen3 x8, 2 ports, 14 MSI-X interrupts, 31 eq, 13 iq
pci7: <mass storage, SCSI> at device 0.5 (no driver attached)
pci7: <serial bus, Fibre Channel> at device 0.6 (no driver attached)
xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf9900000-0xf990ffff irq 19 at device 20.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci1: <simple comms> at device 22.0 (no driver attached)
pci1: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf9914000-0xf99143ff irq 18 at device 26.0 on pci1
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci1
pci8: <ACPI PCI bus> on pcib8
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xfb500000-0xfb57ffff,0xfb580000-0xfb583fff irq 16 at device 0.0 on pci8
igb0: Using MSIX interrupts with 5 vectors
igb0: Ethernet address: ac:1f:6b:75:a5:3c
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: Bound queue 2 to cpu 2
igb0: Bound queue 3 to cpu 3
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci1
pci9: <ACPI PCI bus> on pcib9
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xc000-0xc01f mem 0xfb400000-0xfb47ffff,0xfb480000-0xfb483fff irq 17 at device 0.0 on pci9
igb1: Using MSIX interrupts with 5 vectors
igb1: Ethernet address: ac:1f:6b:75:a5:3d
igb1: Bound queue 0 to cpu 0
igb1: Bound queue 1 to cpu 1
igb1: Bound queue 2 to cpu 2
igb1: Bound queue 3 to cpu 3
pcib10: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci1
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib11
vgapci0: <VGA-compatible display> port 0xb000-0xb07f mem 0xfa000000-0xfaffffff,0xfb000000-0xfb01ffff irq 16 at device 0.0 on pci11
vgapci0: Boot video device
ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf9913000-0xf99133ff irq 18 at device 29.0 on pci1
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci1
isa0: <ISA bus> on isab0
ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf9912000-0xf99127ff irq 16 at device 31.2 on pci1
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0
ipmi0: KCS mode found at io 0xca2 on acpi
ichwd0: <Intel Lynx Point watchdog timer> on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff,0xcf000-0xcffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ipmi0: IPMI device rev. 1, firmware rev. 3.68, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
ugen0.2: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub3 on uhub2
uhub3: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 1> on usbus0
uhub3: MTT enabled
ugen2.2: <vendor 0x8087 product 0x8000> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2
ugen1.2: <vendor 0x8087 product 0x8008> at usbus1
uhub5 on uhub1
uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1
uhub5: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen0.3: <vendor 0x05e3 USB2.0 Hub> at usbus0
uhub6 on uhub3
uhub6: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/32.98, addr 2> on usbus0
uhub6: MTT enabled
uhub6: 4 ports with 4 removable, self powered
ugen0.4: <vendor 0x0557 product 0x7000> at usbus0
uhub7 on uhub2
uhub7: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3> on usbus0
uhub7: 4 ports with 3 removable, self powered
ugen0.5: <vendor 0x0557 product 0x2419> at usbus0
ukbd0 on uhub7
ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
kbd2 at ukbd0
ugen0.6: <ADATA ADATA USB Flash Drive> at usbus0
umass0 on uhub2
umass0: <ADATA ADATA USB Flash Drive, class 0/0, rev 3.10/10.75, addr 5> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0: Attached to scbus8
ada0 at ahcich2 bus 0 scbus3 target 0 lun 0
ada0: <MB8000GEQUU HPG7> ACS-2 ATA SATA 3.x device
ada0: Serial Number VKH48AKX
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 7630885MB (15628053168 512 byte sectors)
da0 at mps0 bus 0 scbus0 target 14 lun 0
da0: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number 2KV4K58A
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 190782MB (390721968 512 byte sectors)
da1 at mps0 bus 0 scbus0 target 15 lun 0
da1: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da1: Serial Number 2KV4KNXA
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 190782MB (390721968 512 byte sectors)
da2 at mps0 bus 0 scbus0 target 16 lun 0
da2: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da2: Serial Number 2KV4JHSA
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 190782MB (390721968 512 byte sectors)
da4 at mps0 bus 0 scbus0 target 18 lun 0
da4: <HGST HUSMM1620ASS204 C300> Fixed Direct Access SPC-4 SCSI device
da4: Serial Number 0PY2Z74A
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 190782MB (390721968 512 byte sectors)
da3 at mps0 bus 0 scbus0 target 17 lun 0
da3: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da3: Serial Number 2KV4K3AA
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 190782MB (390721968 512 byte sectors)
da5 at mps0 bus 0 scbus0 target 19 lun 0
da5: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da5: Serial Number 2KV4KNSA
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 190782MB (390721968 512 byte sectors)
da6 at mps0 bus 0 scbus0 target 20 lun 0
da6: <HGST HUSMM812 CLAR200 C118> Fixed Direct Access SPC-4 SCSI device
da6: Serial Number 2KV4JWLA
da6: 600.000MB/s transfers
da6: Command Queueing enabled
da6: 190782MB (390721968 512 byte sectors)
da7 at umass-sim0 bus 0 scbus8 target 0 lun 0
da7: <ADATA USB Flash Drive 1.00> Removable Direct Access SPC-4 SCSI device
da7: Serial Number 27B2404420160059
da7: 400.000MB/s transfers
da7: 29600MB (60620800 512 byte sectors)
da7: quirks=0x2<NO_6_BYTE>
random: unblocking device.
Trying to mount root from zfs:freenas-boot/ROOT/default []...
igb1: link state changed to UP
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_MIRROR: Device mirror/swap2 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
cxl0: link state changed to DOWN
igb1: link state changed to DOWN
cxl0: link state changed to UP
igb1: link state changed to UP
ums0 on uhub7
ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
cxl0: transceiver unplugged.
cxl0: link state changed to DOWN
cxl0: 10Gbps TWINAX transceiver inserted.
cxl0: link state changed to UP
cxl0: link state changed to DOWN
cxl0: link state changed to UP
GEOM_ELI: Device mirror/swap2.eli destroyed.
GEOM_MIRROR: Device swap2: provider destroyed.
GEOM_MIRROR: Device swap2 destroyed.
GEOM_ELI: Device mirror/swap1.eli destroyed.
GEOM_MIRROR: Device swap1: provider destroyed.
GEOM_MIRROR: Device swap1 destroyed.
GEOM_ELI: Device mirror/swap0.eli destroyed.
GEOM_MIRROR: Device swap0: provider destroyed.
GEOM_MIRROR: Device swap0 destroyed.
GEOM_MIRROR: Device mirror/swap0 launched (2/2).
GEOM_MIRROR: Device mirror/swap1 launched (2/2).
GEOM_MIRROR: Device mirror/swap2 launched (2/2).
GEOM_ELI: Device mirror/swap0.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
GEOM_ELI: Device mirror/swap2.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
any ideas? im sure these xxx.date folders are related to my problem.
thanks
Last edited:
