11.1-u7 to 11.2-u3 hba firmware question

[wah00kid]

So I am starting the upgrade process from 11.1 to 11.3 and my first step is just to get to 11.2 then I can sort out all my old jails.

Reading the documentation

The only caveat that applies to me that I see:

Upgrading the firmware of Broadcom SAS HBAs to the latest version is recommended.

I have a dell perc h200 that i cross flashed and have no problems with. Here is the current sas2flash -listall off my machine:

Code:

sas2flash -listall
LSI Corporation SAS2 Flash Utility
Version 16.00.00.00 (2013.03.01)
Copyright (c) 2008-2013 LSI Corporation. All rights reserved

        Adapter Selected is a LSI SAS: SAS2008(B2)

Num   Ctlr            FW Ver        NVDATA        x86-BIOS         PCI Addr
----------------------------------------------------------------------------

0  SAS2008(B2)     20.00.07.00    14.01.00.08      No Image      00:05:00:00

        Finished Processing Commands Successfully.
        Exiting SAS2Flash.

Am I good with this or do I need to upgrade this further?

Thanks in advance for any time you spend helping.