Looking for help/advice. For the last week EVERY night just after 0300 EST my server has produced Warnings, blocked tasks, LOCKED files, etc. This started while running 11.2-U4 and continued after upgrading to 11.2-U5. No system changes were made prior to this daily event taking place. My jails...

The S.M.A.R.T service has everything disabled by default. What are the best practices for this? I read that Seagate says that drive temps should not exceed 69C. So I was thinking of setting Difference: 0 Informational:60 Crititical:65 Thoughts?

Freenas 11.1-U4 S.M.A.R.T. crashed and will not restart. I tried removing S.M.A.R.T. from the usb drive and it still not starting. System log says the following before and after removing SMART from the usb. "Server smartd [81374]: Unable to register device /dev/da0 (no Directive -d...

Hi, I'm having an issue getting the SMART service to start on a new build. SPECS: Dell PowerEdge T630 - BIOS 2.7.1 CPU - Xeon E5-2680 (2) Memory - 64GB ECC SAS - PERC H730 HBA Mode - Firmware 4.270.00-8178 Pool - 1 Z3 9 drives FreeNas Version - 11.1-U4 Issue: When I try to enable the SMART...

Hello FreeNAS forum, I have been employed at the Royal Institute of Technology, Stockholm, Sweden, for many years, doing lab management, computer administration, web-services. I have used FreeBSD for several years, and FreeNAS for a few years, one 8.3 installation running and one 11.0...

build: FreeNAS-9.10.2-U1 (86c7ef5) The server was installed with RAID turned on. Can't go back now. smartd is turned on and enabled on the disk device FreeNAS can see (RAID volume /dev/mfid1) the GUI. smartd.conf is automatically generated: ~# cat /usr/local/etc/smartd.conf...

Preface.... This may be a dumb question.... Ok, I have used 9.2.1.5, 9.2.1.8, 9.3, and am now running the most current version of 9.10.1-U4. My hardware is beyond recommended specs. I have looked for a few days now for this exact question and cant seem to find a specific answer (again, maybe...

Hello everyone. Just installed FreeNas a couple of days ago and I am experiencing an issue that I can't resolve. I did search the forums, but was unable to find an answer to the problem. First off, the system is: FreeNAS-9.10.1-U2 Motherboard EVGA nVidia nForce 680i SLI Intel Core2 Duo E6750 @...