My ixsystems freenas certified system crashed today and won't boot up. The box is only 4 months old. I haven't updated it since I got it. It gets stuck right after importing zfs. Here's the last few lines from the boot screen. Any ideas? zfs_ioc_pool_import() at...

So, as my title says I think my ZFS is causing me FreeNAS to immediately enter panicmode. Here's a quick picture I took of the whole error message: Here's a bit more info: Hardware: Xeon E3-1231 v3 Mainboard: MSI Gaming 3 Z97 RAM: 16GB Storage: The system itself runs on a 240GB WD m.2...

Recently I acquired a different motherboard that offered my more Memory channels (the Acer ipimb-ar with BIOS version P01-A1)(i3-2120 with one (eventually two) stick of 4 Gb DDR3 1333MHz RAM and an Intel D33682 NIC installed) and I had to replace my OS drive (SSD) with a new one. When I insert...

I had two FreeNAS systems crash within fifteen minutes of each other. The culprit was nfsrv_checksequence and I filed a bug report at FreeBSD: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=228497 I'm not sure whether FreeNAS does an upstream-tracking bug, but lemme know if I should create one.

Hi all, I needed some advise on what the best solution would be for me to move some or all of my data out of my now corrupted FreeNAS so that I can wipe/format the OS and data drives and build a new clean system. Here is the hardware we have available to move data to/from: FreeNAS-main --...

I have had this Ubuntu server running on a UEFI Bhyve VM on Freenas 11.1-RELEASE for a while, and it has been working fine. I recently ran some updates on Ubuntu, but never restarted the server. After getting some Freenas messages relating to running out of Swap Utilization space recently, I...

ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <WDC WD40EFRX-68WT0N0 82.00A82> ACS-2 ATA SATA 3.x device ada0: Serial Number WD-WCC4E0YY99HK ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 3815447MB (7814037168 512 byte sectors) ada0...