I'm running a fresh install of FreeNAS 11.2-RELEASE-U1 which worked fine until I added HP NC550SFP 581199-01 10Gbe NIC. With the NIC installed freenas won't boot and throws Fatal trap 12 error, but when I removed the card it works fine. I even tried to do a fresh install but even booting of the...

I have been looking to move into ten gigabit ethernet for some time and final found a workable switch. Another forum member mentioned having issues with vlans on it and I have not seen it on the "Cheap 10gbe Switch" lists so I did a little research. The NetApp CN1610 is a 16 SFP+ port switch...

-chassis: iw-ms08 (400$ including a 500W PSU) -MB: X11SSH-TF-O (330$ uATX, 10Gbe X550, 8 SATA 3, Xeon E3-1200 v6/v5 or 7th/6th Gen i3, 64GB Unbuffered ECC) -CPU: Xeon E3-1220 V6 (200$, 3GHz Quad-Core) -HDD: WD red 3T (x8) [from previous build] -RAM: 32 GB (300$, M378A2K43BB1-CPB Samsung 16GB...

My system specs: Supermicro: SuperServer 5018A-AR12L 32G RAM 12x4TB disks 2x1TB Samsung 540 Pro, I only have a very tiny portion(I know, way overkill even for over provisioning) configured for slog and l2arc Freenas 11.1-U3 As the subject indicates, I'm having issues with my 10g controller...

I've been working on a Plex issue for the last three days and in an effort to fix that issue, I decided to just reboot the whole server. When I did, the web interface never came back although my network card is online and has an IP address. My SMB shares are online and I can see all my jails...

Hello all, I'm seeing a weird issue with my 10Gb adapters that I don't really know how to debug. I have the following setup: On Freenas I have an Intel X540-T2 adapter linked directly to my desktop using a good quality 10m CAT6e cable. The desktop uses the Intel X550 adapter onboard the Asus...

SOLVED: So I created a stripe/RAID0 and iperf continued giving me the exact same results, however, with a ramdisk I was getting full 10gbe throughput both ways. I guess with RAIDZ was the bottle neck for the write speeds! =( lol. Also, for anyone using this as a guide, I deleted all the...