qBittorrent - Port Forwading

[BunshinON]

I have freshly installed TrueNAS SCALE in version 22.02.4 and I can't forward the connection port of the qBittorrent app (version 4.5.0_1.0.9). I have tried various configurations without success. I also have the Plex app which I have been able to forward its corresponding port without any issues.

Settings I've tried on qBittorrent:​

• Options / Connection label:
  • Peer connection protocol: I've tried all options (TCP and µTP, TCP, µTP)
  • Fieldset Listening Port:
    • I've tried the default port: 6881 but also a random one: 45719
    • I've tried with the Use UPnP / NAT-PMP port forwarding from my router option checked and unchecked.

Router forwarding:​

• Forwarding port 45719 (qBittorrent) to TrueNAS with IP 192.168.1.10:

• Test made with qBittorrent ACTIVE and downloading a torrent:

• Forwarding port 32400 (Plex) to TrueNAS with IP 192.168.1.10:

• Test made with Plex ACTIVE:

I have noticed something that may be interesting... In the ports that qBittorrent theoretically uses, the one configured in the Options / Connection / Listening Port section does not appear. However, in Plex the port that I am redirecting does appear:

Could anyone please help me?

Thank you very much!

 

[Jmia18]

I am experiencing the same issue. Can get Plex working just fine. Did you ever figure out the issue?

 

[winnielinnie]

I am experiencing the same issue. Can get Plex working just fine. Did you ever figure out the issue?

It might be an un(side)-related issue. Are you using Core or SCALE?

 

[Jmia18]

SCALE

It might be an un(side)-related issue. Are you using Core or SCALE?

SCALE

 

[sakuyamaij]

If you are using official chart qB, default TCP port are 20988.
You need change your qB port in webui to 20988 too.

If you wanna change it, you need change both two at same time

 

[Pandorumx5]

If you are using official chart qB, default TCP port are 20988.
You need change your qB port in webui to 20988 too.

If you wanna change it, you need change both two at same time

What do you mean by this? If I set the WebUI and TCP for the same it doesn't work, can't access WebUI.

 

[sakuyamaij]

What do you mean by this? If I set the WebUI and TCP for the same it doesn't work, can't access WebUI.

These three ports should be same
And set your tcp & udp forward on your router, for example

 

[Pandorumx5]

View attachment 63998 View attachment 63999
These three ports should be same
And set your tcp & udp forward on your router, for example
View attachment 64000 View attachment 64001

Thanks, it worked :)

 

[winnielinnie]

Screenshots are too small. Having difficulty reading them. Can you scale them up by an extra 400%?

 

[eXPerience83]

Hi, but , is there any way to use upnp port-forwarding to open/close automatically these ports on the router? qBittorrent has this option, but it doesn't seems to work. I need to open it manually on the router