Hello
I have made a clean install of version 11.3 on new box, after some time of running i have try to create new pool.
System throw lots of "mprsas_send_abort" and drives discover messages on console than completly hang.
After reboot i was able to repeat operation few times without issue but after short period of time ( like 10 minutes) problem reoccure.
I have suspect hardware issue but version 11.2U7 installed few days ago and currently under burn-in is working completely fine.
HBA is AOC-S3008L-L8e with newest firmware available from Supermicro.
Rest of hardware is:
I have made a clean install of version 11.3 on new box, after some time of running i have try to create new pool.
System throw lots of "mprsas_send_abort" and drives discover messages on console than completly hang.
After reboot i was able to repeat operation few times without issue but after short period of time ( like 10 minutes) problem reoccure.
I have suspect hardware issue but version 11.2U7 installed few days ago and currently under burn-in is working completely fine.
HBA is AOC-S3008L-L8e with newest firmware available from Supermicro.
Code:
Adapter Selected is a Avago SAS: SAS3008(C0) Controller Number : 0 Controller : SAS3008(C0) PCI Address : 00:01:00:00 SAS Address : 5003048-0-2322-2501 NVDATA Version (Default) : 0e.01.30.28 NVDATA Version (Persistent) : 0e.01.30.28 Firmware Product ID : 0x2221 (IT) Firmware Version : 16.00.01.00 NVDATA Vendor : LSI NVDATA Product ID : LSI3008-IT BIOS Version : 08.37.00.00 UEFI BSD Version : 18.00.00.00 FCODE Version : N/A Board Name : LSI3008-IT Board Assembly : N/A Board Tracer Number : N/A
Rest of hardware is:
Code:
Intel E3-v1230 v6 X11SSH-LN4F 32GB of ECC RAM 6x WD RED 6TB