Hi All,
I'm new in FreeNAS.
I catch a problem with my Seagate 3Tb disks. So, I have 2 massive first with 2 Saegate 2Tbx2 disks and second with Seagate 3TBx2 disks. All 3Tb disk marked as end_of_life. I've replace these to another server and recheck with BIOS, Raid Controller BIOS and Seagate tools - All tools show me that disks has good state. But FreeNAS all time marked there as end_of_life.
So, How can I resolve this problem? Which tools I must trust?
PS: At the moment I've started long self-test. After continue I'll post results.
Kind Regards
I'm new in FreeNAS.
I catch a problem with my Seagate 3Tb disks. So, I have 2 massive first with 2 Saegate 2Tbx2 disks and second with Seagate 3TBx2 disks. All 3Tb disk marked as end_of_life. I've replace these to another server and recheck with BIOS, Raid Controller BIOS and Seagate tools - All tools show me that disks has good state. But FreeNAS all time marked there as end_of_life.
Code:
[root@HFPHFNL001] ~# smartctl -H /dev/ada1 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p26 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED Please note the following marginal Attributes: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
Code:
[root@HFPHFNL001] ~# smartctl -a /dev/ada1 smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p26 amd64] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST3000DM001-1CH166 Serial Number: W1F3FYE5 LU WWN Device Id: 5 000c50 06a3ab655 Firmware Version: CC27 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Oct 29 00:08:08 2015 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 584) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 336) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x3085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 218351032 3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 229 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 8 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 12938741892 9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 3226 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 99 183 Runtime_Bad_Block 0x0032 094 094 000 Old_age Always - 6 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 099 000 Old_age Always - 1 9 16 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 066 051 045 Old_age Always - 34 (Min/Max 34/35) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 226 193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7785 194 Temperature_Celsius 0x0022 034 049 000 Old_age Always - 34 (0 16 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 187 000 Old_age Always - 92 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2129h+12m+23.358s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 6568419503 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 71675417910 SMART Error Log Version: 1 ATA Error Count: 16 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 16 occurred at disk power-on lifetime: 1495 hours (62 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f a8 46 00 Error: UNC at LBA = 0x0046a89f = 4630687 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 00 9f a8 46 40 00 00:01:49.056 READ VERIFY SECTOR(S) EXT 42 00 01 9e a8 46 40 00 00:01:48.659 READ VERIFY SECTOR(S) EXT 61 00 01 9e a8 46 40 00 00:01:48.659 WRITE FPDMA QUEUED 42 00 00 9e a8 46 40 00 00:01:48.322 READ VERIFY SECTOR(S) EXT 42 00 01 9d a8 46 40 00 00:01:47.919 READ VERIFY SECTOR(S) EXT Error 15 occurred at disk power-on lifetime: 1495 hours (62 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9f a8 46 00 Error: UNC at LBA = 0x0046a89f = 4630687 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 00 9f a8 46 40 00 00:01:49.056 READ VERIFY SECTOR(S) EXT 42 00 01 9e a8 46 40 00 00:01:48.659 READ VERIFY SECTOR(S) EXT 61 00 01 9e a8 46 40 00 00:01:48.659 WRITE FPDMA QUEUED 42 00 00 9e a8 46 40 00 00:01:48.322 READ VERIFY SECTOR(S) EXT 42 00 01 9d a8 46 40 00 00:01:47.919 READ VERIFY SECTOR(S) EXT Error 14 occurred at disk power-on lifetime: 1495 hours (62 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9e a8 46 00 Error: UNC at LBA = 0x0046a89e = 4630686 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 00 9e a8 46 40 00 00:01:48.322 READ VERIFY SECTOR(S) EXT 42 00 01 9d a8 46 40 00 00:01:47.919 READ VERIFY SECTOR(S) EXT 61 00 01 9d a8 46 40 00 00:01:47.918 WRITE FPDMA QUEUED 42 00 00 9d a8 46 40 00 00:01:47.589 READ VERIFY SECTOR(S) EXT 42 00 01 9c a8 46 40 00 00:01:47.182 READ VERIFY SECTOR(S) EXT Error 13 occurred at disk power-on lifetime: 1495 hours (62 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9e a8 46 00 Error: UNC at LBA = 0x0046a89e = 4630686 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 00 9e a8 46 40 00 00:01:48.322 READ VERIFY SECTOR(S) EXT 42 00 01 9d a8 46 40 00 00:01:47.919 READ VERIFY SECTOR(S) EXT 61 00 01 9d a8 46 40 00 00:01:47.918 WRITE FPDMA QUEUED 42 00 00 9d a8 46 40 00 00:01:47.589 READ VERIFY SECTOR(S) EXT 42 00 01 9c a8 46 40 00 00:01:47.182 READ VERIFY SECTOR(S) EXT Error 12 occurred at disk power-on lifetime: 1495 hours (62 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 9d a8 46 00 Error: UNC at LBA = 0x0046a89d = 4630685 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 42 00 00 9d a8 46 40 00 00:01:47.589 READ VERIFY SECTOR(S) EXT 42 00 01 9c a8 46 40 00 00:01:47.182 READ VERIFY SECTOR(S) EXT 61 00 01 9c a8 46 40 00 00:01:47.182 WRITE FPDMA QUEUED 42 00 00 9c a8 46 40 00 00:01:46.855 READ VERIFY SECTOR(S) EXT 42 00 01 9b a8 46 40 00 00:01:46.454 READ VERIFY SECTOR(S) EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 3225 - # 2 Extended offline Aborted by host 90% 3225 - # 3 Extended offline Aborted by host 90% 3225 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
So, How can I resolve this problem? Which tools I must trust?
PS: At the moment I've started long self-test. After continue I'll post results.
Kind Regards