I am getting the below alert
I am running a Custom Lenovo ThinkServer TS140 70A4000HUX i3-4130 16GB RAM No HDD Tower Desktop Server. The server has been running since early January 2015.
I have ran scrubs on the Zpool a couple of times and it comes back with the following information.
CRITICAL: The volume vol1 (ZFS) state is DEGRADED: One or more devices has experienced an error resulting in data corruption. Applications may be affected.
I am running a freenas version FreeNAS-9.3-STABLE-201506162331. I know I am a few versions behind. I had to try different backups to get the server to boot up completely.
I am running a Custom Lenovo ThinkServer TS140 70A4000HUX i3-4130 16GB RAM No HDD Tower Desktop Server. The server has been running since early January 2015.
I have ran scrubs on the Zpool a couple of times and it comes back with the following information.
[root@freenas ~]# zpool status -v
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 11h51m with 0 errors on Thu Jul 23 19:34:13 2015
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
gptid/7efa0eff-a0fa-11e4-8c45-6c0b84042e8c ONLINE 0 0 0
errors: No known data errors
pool: vol1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: scrub repaired 0 in 4h10m with 2 errors on Mon Jul 27 23:42:56 2015
config:
NAME STATE READ WRITE CKSUM
vol1 DEGRADED 0 0 18
raidz1-0 DEGRADED 0 0 36
gptid/a39e1388-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 55 too many errors
gptid/a45afa46-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 151 too many errors
gptid/a4c90022-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 139 too many errors
errors: Permanent errors have been detected in the following files:
vol1/media:<0x4178>
[root@freenas ~]#
I am currently backing up most of the data on the Zpool to an external USB drive.
Is there anything I can do to repair the install or would it be best to do a complete reinstall of freenas?
If I have to reinstall, how can I copy my setup backup to the new install if needed.
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 11h51m with 0 errors on Thu Jul 23 19:34:13 2015
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
gptid/7efa0eff-a0fa-11e4-8c45-6c0b84042e8c ONLINE 0 0 0
errors: No known data errors
pool: vol1
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://illumos.org/msg/ZFS-8000-8A
scan: scrub repaired 0 in 4h10m with 2 errors on Mon Jul 27 23:42:56 2015
config:
NAME STATE READ WRITE CKSUM
vol1 DEGRADED 0 0 18
raidz1-0 DEGRADED 0 0 36
gptid/a39e1388-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 55 too many errors
gptid/a45afa46-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 151 too many errors
gptid/a4c90022-a103-11e4-a644-6c0b84042e8c DEGRADED 0 0 139 too many errors
errors: Permanent errors have been detected in the following files:
vol1/media:<0x4178>
[root@freenas ~]#
I am currently backing up most of the data on the Zpool to an external USB drive.
Is there anything I can do to repair the install or would it be best to do a complete reinstall of freenas?
If I have to reinstall, how can I copy my setup backup to the new install if needed.