Brian Sturk
Dabbler
- Joined
- Apr 12, 2015
- Messages
- 15
A scrub was kicked off early this morning (I assume via a cronjob, etc since I did not initiate it) and it seems to only get about 51% or so of the way done and then stalls out. I have rebooted to see if not having a lot of I/O going on would help and I get the same behavior. Here is the output of zpool status:
root@freenas:~ # zpool status -v zfs_root
pool: zfs_root
state: ONLINE
scan: scrub in progress since Sun May 24 00:00:14 2020
4.24T scanned at 410M/s, 3.63T issued at 252M/s, 7.02T total
0 repaired, 51.72% done, 0 days 03:54:42 to go
config:
NAME STATE READ WRITE CKSUM
zfs_root ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/ec7455d8-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ed2f8e60-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ed8369f5-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ede0a9cb-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
errors: No known data errors
I've let it sit for a while and nothing changes other than the estimated time. Read I/O seems to somewhat work while in this condition, but I experienced lockups over smb and nfs when doing writes/deletes. I also don't see anything via dmesg. I'm running 11.1 STABLE:
FreeBSD 11.1-STABLE (FreeNAS.amd64) #0 r321665+d4625dcee3e(freenas/11.1-stable): Wed Dec 13 16:33:42 UTC 2017
Just wondering what else I can check or do.
root@freenas:~ # zpool status -v zfs_root
pool: zfs_root
state: ONLINE
scan: scrub in progress since Sun May 24 00:00:14 2020
4.24T scanned at 410M/s, 3.63T issued at 252M/s, 7.02T total
0 repaired, 51.72% done, 0 days 03:54:42 to go
config:
NAME STATE READ WRITE CKSUM
zfs_root ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gptid/ec7455d8-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ed2f8e60-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ed8369f5-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
gptid/ede0a9cb-6dd8-11e4-9b22-d050992934fa ONLINE 0 0 0
errors: No known data errors
I've let it sit for a while and nothing changes other than the estimated time. Read I/O seems to somewhat work while in this condition, but I experienced lockups over smb and nfs when doing writes/deletes. I also don't see anything via dmesg. I'm running 11.1 STABLE:
FreeBSD 11.1-STABLE (FreeNAS.amd64) #0 r321665+d4625dcee3e(freenas/11.1-stable): Wed Dec 13 16:33:42 UTC 2017
Just wondering what else I can check or do.
Last edited: