Windows 10. Problems when trying to connect to shared folder.

[jagc1969]

Hi,

We have a Freenas system at home with the following configuration:

FreeNAS server : (IP : 192.168.0.17) FreeNAS 9.2.1.5
Client computer : (IP : 192.168.0.14) Windows 10

In the FreeNAS server we have created a volume with its share for Windows, etc.

If you make "ping" towards the other computer, you receive the right answers, so each computer is "seeing" the other.

But if you try, from the client computer, to look for the share on the server to stablish a connection, you will find nothing.

We have tried to deactivate the firewall and the issue continues.

Any suggestions, please ?

Thanks for your help.

Kind Regards,

Juan.

 

[cobrakiller58]

open my computer and type \\192.168.0.17\ in the address bar and see that happens

 

[jagc1969]

We receive the following message:

Windows can't get access to \\192.168.0.17\

Error code : 0x80004005

 

[jagc1969]

But if you open the navigator window and write http://192.168.0.17 the administration screen for the installed FreeNAS is shown...

 

[cobrakiller58]

what version of FreeNAS are you using? is the SMB service running http://doc.freenas.org/11/services.html

 

[jagc1969]

We are using FreeNAS 9.2.1.5. The active services are : AFP , CIFS, FTP , NFS , S.M.A.R.T. , SNMP, SSH, TFTP. Inactive services are : Dynamic DNS, iSCSI, Rsync, and UPS. No SMB service available for switching it on/off.