Why is the gptid different

[alxxer]

Why is my gptid different with this drive?

Code:

[root@freenas] /mnt/storage00/HTPC/BACKUP# zpool iostat -v
                                           capacity     operations    bandwidth
pool                                    alloc   free   read  write   read  write
--------------------------------------  -----  -----  -----  -----  -----  -----
freenas-boot                             521M  14.4G      0      0  6.09K  1.26K
  da8p2                                  521M  14.4G      0      0  6.09K  1.26K
--------------------------------------  -----  -----  -----  -----  -----  -----
storage00                               8.75T  5.75T    217    295  25.1M  27.1M
  mirror                                2.18T  1.44T     46     58  5.41M  5.40M
    gptid/9eb8b753-0761-11e3-864f-6805ca14dfe2      -      -     23     50  2.76M  5.40M
    da5p2                                   -      -     22     50  2.65M  5.40M
  mirror                                1.77T   971G     42     56  4.89M  5.20M
    gptid/c4caec32-0761-11e3-864f-6805ca14dfe2      -      -     21     48  2.45M  5.20M
    gptid/c54919bd-0761-11e3-864f-6805ca14dfe2      -      -     20     48  2.44M  5.20M
  mirror                                1.03T   796G     38     67  4.48M  5.86M
    gptid/c6f74777-61d0-11e4-aa5a-0cc47a01268d      -      -     21     55  2.53M  5.87M
    gptid/91f4bd0f-8901-11e3-8703-ac220bdcff65      -      -     16     55  1.96M  5.87M
  mirror                                1.74T  1.88T     40     64  4.58M  6.21M
    gptid/1227dacc-61d0-11e4-aa5a-0cc47a01268d      -      -     20     56  2.35M  6.21M
    gptid/bfc4fe81-8889-11e3-a26c-ac220bdcff65      -      -     19     56  2.23M  6.21M
  mirror                                2.02T   713G     49     47  5.77M  4.44M
    gptid/bd426018-0c4e-11e3-b2fa-6805ca14dfe2      -      -     24     41  2.86M  4.44M
    gptid/bdc4a828-0c4e-11e3-b2fa-6805ca14dfe2      -      -     24     41  2.91M  4.44M
--------------------------------------  -----  -----  -----  -----  -----  -----

 

[cyberjock]

Did you replace the disk using the WebGUI?

 

[SweetAndLow]

The drive was probably replaced not using freeNAS. You should offline that drive wipe it and readd it using the FreeNAS gui.

 

[alxxer]

Did you replace the disk using the WebGUI?

I was a long time ago, I may have done it from the CLI

 

[alxxer]

The drive was probably replaced not using freeNAS. You should offline that drive wipe it and readd it using the FreeNAS gui.

I did do it with FreeNAS, that is the only OS I ran on the server.

 

[SweetAndLow]

I was a long time ago, I may have done it from the CLI

If you used the cli you didn't use freenas. You should offline the drive and replace it using the GUI.

 

[Ericloewe]

If you used the cli you didn't use freenas. You should offline the drive and replace it using the GUI.

pedantic mode on

It was FreeNAS, just done incorrectly.

pedantic mode off

(Please don't ask me to do -Wall. -pedantic is messy enough).

 

[alxxer]

If you used the cli you didn't use freenas. You should offline the drive and replace it using the GUI.

So I went to the GUI click on the disk but the lower part of the screen where I would select "Offline Disk" is not there. Could this be a weird bug or my install is corrupted?

 

[cyberjock]

So I went to the GUI click on the disk but the lower part of the screen where I would select "Offline Disk" is not there. Could this be a weird bug or my install is corrupted?

That usually means you are using Internet Explorer. :)

I've always narrowed it down to Internet Explorer or a plugin/addon for the browser.

 

[Ericloewe]

That usually means you are using Internet Explorer. :)

I've always narrowed it down to Internet Explorer or a plugin/addon for the browser.

IE has no trouble rendering the GUI, last time I checked.

I think it's more likely that that's the wrong screen.

So I went to the GUI click on the disk but the lower part of the screen where I would select "Offline Disk" is not there. Could this be a weird bug or my install is corrupted?

Are you in the "view disks" page? Don't get it confused with the view pool page.

 

[alxxer]

IE has no trouble rendering the GUI, last time I checked.

I think it's more likely that that's the wrong screen.

Are you in the "view disks" page? Don't get it confused with the view pool page.

Good call, I was using chrome on my Mac, I used Safari instead and it worked. Thanks

 

[alxxer]

That usually means you are using Internet Explorer. :)

I've always narrowed it down to Internet Explorer or a plugin/addon for the browser.

Thanks, right it was a browser issue

 

[alxxer]

If you used the cli you didn't use freenas. You should offline the drive and replace it using the GUI.

Fowled through, I offlined the drive in GUI then formatted it, Reslivered it - that worked

Code:

[root@freenas] ~# zpool status
  pool: freenas-boot
state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    freenas-boot  ONLINE       0     0     0
      da8p2     ONLINE       0     0     0

errors: No known data errors

  pool: storage00
state: ONLINE
  scan: resilvered 2.38T in 7h8m with 0 errors on Thu Jul 30 01:53:27 2015
config:

    NAME                                            STATE     READ WRITE CKSUM
    storage00                                       ONLINE       0     0     0
      mirror-0                                      ONLINE       0     0     0
        gptid/9eb8b753-0761-11e3-864f-6805ca14dfe2  ONLINE       0     0     0
        gptid/8bfa3708-365c-11e5-a46d-0cc47a01268d  ONLINE       0     0     0
      mirror-1                                      ONLINE       0     0     0
        gptid/c4caec32-0761-11e3-864f-6805ca14dfe2  ONLINE       0     0     0
        gptid/c54919bd-0761-11e3-864f-6805ca14dfe2  ONLINE       0     0     0
      mirror-2                                      ONLINE       0     0     0
        gptid/c6f74777-61d0-11e4-aa5a-0cc47a01268d  ONLINE       0     0     0
        gptid/91f4bd0f-8901-11e3-8703-ac220bdcff65  ONLINE       0     0     0
      mirror-3                                      ONLINE       0     0     0
        gptid/1227dacc-61d0-11e4-aa5a-0cc47a01268d  ONLINE       0     0     0
        gptid/bfc4fe81-8889-11e3-a26c-ac220bdcff65  ONLINE       0     0     0
      mirror-4                                      ONLINE       0     0     0
        gptid/bd426018-0c4e-11e3-b2fa-6805ca14dfe2  ONLINE       0     0     0
        gptid/bdc4a828-0c4e-11e3-b2fa-6805ca14dfe2  ONLINE       0     0     0

 

[cyberjock]

Internet Explorer is definitely broken. I see it at least twice a week when people call iXsystems support and we have to ask them if they are using Internet Explorer. :P

 

[Ericloewe]

Never had any trouble with IE11.

I can imagine ancient versions not rendering it properly, though.