Lots of good info on the forums and I thank you all for this thus far. Im mainly looking for confirmation. I moved the drives from one case to another and SOME of the reviews of the case say... it killed my hard drive. So I did a stupid thing and moved the drive to another port in the case to see if the error moves. Apparently free-nas is smart enough to not care where the drive is... it's still da0.
error started last night, While running last night, it claimed to 2.5k errors. so I rebooted to confirm the drive was seated correctly. brought it back up, saw errors climb again, shutdown and moved the drive. below is the output after booting the server the 3rd time.
I'm going to disable my hourly S.M.A.R.T test and run a Long test on the drive. but here is the short output
so... I gotta replace the SPIN drive. which is okay. but I would THINK smart would tell me something!
error started last night, While running last night, it claimed to 2.5k errors. so I rebooted to confirm the drive was seated correctly. brought it back up, saw errors climb again, shutdown and moved the drive. below is the output after booting the server the 3rd time.
Code:
[root@freenas] ~# zpool status -v pool: Vmware state: DEGRADED status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: http://illumos.org/msg/ZFS-8000-9P scan: scrub repaired 0 in 2h58m with 0 errors on Sat Jan 21 10:58:15 2017 config: NAME STATE READ WRITE CKSUM Vmware DEGRADED 0 0 0 raidz1-0 DEGRADED 0 0 0 gptid/a830a765-ae8d-11e6-b089-001b21a7c63c DEGRADED 0 0 33 too many errors gptid/a89e4ab3-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 gptid/a90d594d-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 gptid/a979fb28-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 raidz1-1 ONLINE 0 0 0 gptid/a9e56fc8-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 gptid/aa5673dc-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 gptid/aac48004-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 gptid/ab336f0d-ae8d-11e6-b089-001b21a7c63c ONLINE 0 0 0 errors: No known data errors pool: freenas-boot state: ONLINE scan: scrub repaired 0 in 0h1m with 0 errors on Thu Dec 29 03:46:41 2016 config: NAME STATE READ WRITE CKSUM freenas-boot ONLINE 0 0 0 gptid/87474e74-b21a-11e6-a53f-001b21a7c63c ONLINE 0 0 0
I'm going to disable my hourly S.M.A.R.T test and run a Long test on the drive. but here is the short output
Code:
[root@freenas] ~# smartctl -a /dev/da0 smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HITACHI Product: HUC109045CSS600 Revision: A2B0 Compliance: SPC-4 User Capacity: 450,098,159,616 bytes [450 GB] Logical block size: 512 bytes Rotation Rate: 10020 rpm Form Factor: 2.5 inches Logical Unit id: 0x5000cca0162c6f04 Serial number: KMGTEJXF Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Fri Jan 27 09:08:20 2017 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 36 C Drive Trip Temperature: 85 C Manufactured in week 50 of year 2012 Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 11 Specified load-unload count over device lifetime: 600000 Accumulated load-unload cycles: 76 Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1951387957067776 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 44227 0 44227 143934 407.599 0 write: 0 262436 0 262436 83490 1158.285 0 verify: 0 0 0 0 27039 0.000 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 1575 - [- - -] # 2 Background short Completed - 1574 - [- - -] # 3 Background short Completed - 1573 - [- - -] # 4 Background short Completed - 1572 - [- - -] # 5 Background short Completed - 1571 - [- - -] # 6 Background short Completed - 1570 - [- - -] # 7 Background short Completed - 1569 - [- - -] # 8 Background long Completed - 1568 - [- - -] # 9 Background short Completed - 1566 - [- - -] #10 Background short Completed - 1565 - [- - -] #11 Background short Completed - 1564 - [- - -] #12 Background short Completed - 1563 - [- - -] #13 Background short Completed - 1562 - [- - -] #14 Background short Completed - 1561 - [- - -] #15 Background short Completed - 1560 - [- - -] #16 Background short Completed - 1559 - [- - -] #17 Background short Completed - 1558 - [- - -] #18 Background short Completed - 1557 - [- - -] #19 Background short Completed - 1556 - [- - -] #20 Background short Completed - 1555 - [- - -] Long (extended) Self Test duration: 3670 seconds [61.2 minutes]
so... I gotta replace the SPIN drive. which is okay. but I would THINK smart would tell me something!