Another night, another error. Since it's the beginning of the month, does this have to do with a ZFS Scrub?
Code:
freenas.local kernel log messages:
> Waiting (max 60 seconds) for system process `vnlru' to stop...done
>
> Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...2 2 1 1 1 0 0 0 0 0 done
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
> All buffers synced.
> GEOM_ELI: Device da0p1.eli destroyed.
> GEOM_ELI: Detached da0p1.eli on last close.
> GEOM_ELI: Device da1p1.eli destroyed.
> GEOM_ELI: Detached da1p1.eli on last close.
> GEOM_ELI: Device da2p1.eli destroyed.
> GEOM_ELI: Detached da2p1.eli on last close.
> GEOM_ELI: Device da3p1.eli destroyed.
> GEOM_ELI: Detached da3p1.eli on last close.
> GEOM_ELI: Device da4p1.eli destroyed.
> GEOM_ELI: Detached da4p1.eli on last close.
> GEOM_ELI: Device da5p1.eli destroyed.
> GEOM_ELI: Detached da5p1.eli on last close.
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.2-RELEASE-p3 #0 r262572+38751c8: Thu Mar 20 21:13:02 PDT 2014
> root@build.ixsystems.com:/tank/home/jkh/9.2.1-BRANCH/freenas/os-base/amd64/tank/home/jkh/9.2.1-BRANCH/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
> gcc version 4.2.1 20070831 patched [FreeBSD]
> CPU: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (3300.09-MHz K8-class CPU)
> Origin = "GenuineIntel" Id = 0x306a9 Family = 0x6 Model = 0x3a Stepping = 9
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
> AMD Features2=0x1<LAHF>
> Standard Extended Features=0x281<GSFSBASE,SMEP,ENHMOVSB>
> TSC: P-state invariant, performance statistics
> real memory = 34368126976 (32776 MB)
> avail memory = 33136107520 (31601 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table: <SUPERM SMCI--MB>
> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> cpu2 (AP): APIC ID: 2
> cpu3 (AP): APIC ID: 3
> cpu4 (AP): APIC ID: 4
> cpu5 (AP): APIC ID: 5
> cpu6 (AP): APIC ID: 6
> cpu7 (AP): APIC ID: 7
> WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
> ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> cryptosoft0: <software crypto> on motherboard
> aesni0: <AES-CBC,AES-XTS> on motherboard
> padlock0: No ACE support.
> acpi0: <SUPERM SMCI--MB> on motherboard
> acpi0: Power Button (fixed)
> acpi0: reservation of 67, 1 (4) failed
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> cpu4: <ACPI CPU> on acpi0
> cpu5: <ACPI CPU> on acpi0
> cpu6: <ACPI CPU> on acpi0
> cpu7: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
> atrtc0: Warning: Couldn't map I/O.
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xf020-0xf03f mem 0xdf800000-0xdf81ffff,0xdf825000-0xdf825fff irq 20 at device 25.0 on pci0
> em0: Using an MSI interrupt
> em0: Ethernet address: 00:25:90:d6:51:07
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdf824000-0xdf8243ff irq 16 at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0 on ehci0
> pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> mps0: <LSI SAS2008> port 0xe000-0xe0ff mem 0xdf600000-0xdf603fff,0xdf580000-0xdf5bffff irq 16 at device 0.0 on pci1
> mps0: Firmware: 18.00.00.00, Driver: 16.00.00.00-fbsd
> mps0: IOCCapabilities: 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
> pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
> pci2: <ACPI PCI bus> on pcib2
> em1: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xd000-0xd01f mem 0xdf700000-0xdf71ffff,0xdf720000-0xdf723fff irq 16 at device 0.0 on pci2
> em1: Using MSIX interrupts with 3 vectors
> em1: Ethernet address: 00:25:90:d6:51:06
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xdf823000-0xdf8233ff irq 23 at device 29.0 on pci0
> usbus1: EHCI version 1.0
> usbus1 on ehci1
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> vgapci0: <VGA-compatible display> mem 0xdd000000-0xddffffff,0xdf000000-0xdf003fff,0xde800000-0xdeffffff irq 23 at device 3.0 on pci3
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> ahci0: <Intel Cougar Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xdf822000-0xdf8227ff irq 19 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ahcich1: <AHCI channel> at channel 1 on ahci0
> ahcich2: <AHCI channel> at channel 2 on ahci0
> ahcich3: <AHCI channel> at channel 3 on ahci0
> ahcich4: <AHCI channel> at channel 4 on ahci0
> ahcich5: <AHCI channel> at channel 5 on ahci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
> ichwd0 on isa0
> orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> wbwd0: DevID 0xc3 DevRev 0x33, will not attach, please report this.
> coretemp0: <CPU On-Die Thermal Sensors> on cpu0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> coretemp1: <CPU On-Die Thermal Sensors> on cpu1
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> coretemp2: <CPU On-Die Thermal Sensors> on cpu2
> est2: <Enhanced SpeedStep Frequency Control> on cpu2
> p4tcc2: <CPU Frequency Thermal Control> on cpu2
> coretemp3: <CPU On-Die Thermal Sensors> on cpu3
> est3: <Enhanced SpeedStep Frequency Control> on cpu3
> p4tcc3: <CPU Frequency Thermal Control> on cpu3
> coretemp4: <CPU On-Die Thermal Sensors> on cpu4
> est4: <Enhanced SpeedStep Frequency Control> on cpu4
> p4tcc4: <CPU Frequency Thermal Control> on cpu4
> coretemp5: <CPU On-Die Thermal Sensors> on cpu5
> est5: <Enhanced SpeedStep Frequency Control> on cpu5
> p4tcc5: <CPU Frequency Thermal Control> on cpu5
> coretemp6: <CPU On-Die Thermal Sensors> on cpu6
> est6: <Enhanced SpeedStep Frequency Control> on cpu6
> p4tcc6: <CPU Frequency Thermal Control> on cpu6
> coretemp7: <CPU On-Die Thermal Sensors> on cpu7
> est7: <Enhanced SpeedStep Frequency Control> on cpu7
> p4tcc7: <CPU Frequency Thermal Control> on cpu7
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
> DUMMYNET 0xfffffe0009300cc0 with IPv6 initialized (100409)
> load_dn_sched dn_sched RR loaded
> load_dn_sched dn_sched WF2Q+ loaded
> load_dn_sched dn_sched FIFO loaded
> load_dn_sched dn_sched PRIO loaded
> load_dn_sched dn_sched QFQ loaded
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
> ugen1.1: <Intel> at usbus1
> uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
> uhub0: 2 ports with 2 removable, self powered
> uhub1: 2 ports with 2 removable, self powered
> ugen0.2: <vendor 0x8087> at usbus0
> uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
> ugen1.2: <vendor 0x8087> at usbus1
> uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 6 ports with 6 removable, self powered
> ugen0.3: <Winbond Electronics Corp> at usbus0
> ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
> ums0: 3 buttons and [Z] coordinates ID=0
> ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 3> on usbus0
> ugen1.3: <American Power Conversion> at usbus1
> kbd2 at ukbd0
> ugen1.4: <SanDisk> at usbus1
> umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27, addr 4> on usbus1
> umass0: SCSI over Bulk-Only; quirks = 0x0100
> umass0:8:0:-1: Attached to scbus8
> da0 at mps0 bus 0 scbus0 target 0 lun 0
> da0: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da0: Serial Number WD-WMC4N1489994
> da0: 600.000MB/s transfers
> da0: Command Queueing enabled
> da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da0: quirks=0x8<4K>
> da1 at mps0 bus 0 scbus0 target 1 lun 0
> da1: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da1: Serial Number WD-WCC4N0519493
> da1: 600.000MB/s transfers
> da1: Command Queueing enabled
> da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da1: quirks=0x8<4K>
> da2 at mps0 bus 0 scbus0 target 2 lun 0
> da2: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da2: Serial Number WD-WCC4N0475701
> da2: 600.000MB/s transfers
> da2: Command Queueing enabled
> da2: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da2: quirks=0x8<4K>
> da3 at mps0 bus 0 scbus0 target 3 lun 0
> da3: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da3: Serial Number WD-WMC4N1030128
> da3: 600.000MB/s transfers
> da3: Command Queueing enabled
> da3: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da3: quirks=0x8<4K>
> da4 at mps0 bus 0 scbus0 target 4 lun 0
> da4: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da4: Serial Number WD-WMC4N1073799
> da4: 600.000MB/s transfers
> da4: Command Queueing enabled
> da4: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da4: quirks=0x8<4K>
> da5 at mps0 bus 0 scbus0 target 5 lun 0
> da5: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device
> da5: Serial Number WD-WMC1T2565883
> da5: 600.000MB/s transfers
> da5: Command Queueing enabled
> da5: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da5: quirks=0x8<4K>
> da6 at mps0 bus 0 scbus0 target 6 lun 0
> da6: <ATA WDC WD30EFRX-68A 0A80> Fixed Direct Access SCSI-6 device
> da6: Serial Number WD-WMC1T2597357
> da6: 600.000MB/s transfers
> da6: Command Queueing enabled
> da6: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da6: quirks=0x8<4K>
> SMP: AP CPU #1 Launched!
> da7 at mps0 bus 0 scbus0 target 7 lun 0
> da7: <ATA WDC WD30EFRX-68E 0A80> Fixed Direct Access SCSI-6 device
> da7: Serial Number WD-WMC4N1491868
> da7: 600.000MB/s transfers
> SMP: AP CPU #2 Launched!
> da7: Command Queueing enabled
> da7: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
> da7: quirks=0x8<4K>
> da8 at umass-sim0 bus 0 scbus8 target 0 lun 0
> da8: <SanDisk Cruzer Fit 1.27> Fixed Direct Access SCSI-6 device
> SMP: AP CPU #7 Launched!
> da8: Serial Number 4C530002761111102102
> da8: 40.000MB/s transfers
> da8: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C)
> da8: quirks=0x2<NO_6_BYTE>
> SMP: AP CPU #5 Launched!
> SMP: AP CPU #6 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #4 Launched!
> Timecounter "TSC-low" frequency 1650044696 Hz quality 1000
> Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
> GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> GEOM_ELI: Device gptid/2a0e67aa-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2a82eeea-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2afb7434-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2b79a9e5-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2bf1472f-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2c67faef-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2cedc0a0-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device gptid/2d7a9191-b790-11e3-b9da-002590d65107.eli created.
> GEOM_ELI: Encryption: AES-XTS 128
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da0p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da1p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da2p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da3p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da4p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da5p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da6p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
> GEOM_ELI: Device da7p1.eli created.
> GEOM_ELI: Encryption: AES-XTS 256
> GEOM_ELI: Crypto: hardware
-- End of security output --
