SOLVED Went to Network-->Interfaces and now can't reach FreeNAS box

[primeg1]

I changed the IPv4 to 192.168.1.10 and the IPv4 Netmask to 255.255.255.0/24 in the Interfaces settings - not understanding what I was doing. Usually I read and make sure of what I am about to do. There were 2 interfaces eno0 and eno1 and I changed the second.

I apologize in advance as I haven't been able to find anything on google. I have tried to ping the original ip address 192.168.1.230 with no return. I tried to ping 192.168.1.10 and there is nothing there either. I am worried that I have really done it and am not going to be able to access my NAS any more.

Any help would be greatly appreciated.

 

[m0nkey_]

You can reset/reconfigure the network interfaces on the console: http://doc.freenas.org/11/quick.html#booting

 

[wblock]

What is an "eno" interface? Are both interfaces connected to the network? If so... disconnect one.

The console is the easy way to see what is going on. Connect a monitor and keyboard to use it.

 

[primeg1]

You can reset/reconfigure the network interfaces on the console: http://doc.freenas.org/11/quick.html#booting

Thank you for the help. In my panic and hast I overlooked the obvious. When I get back to the server I will do just as you directed me. Much appreciated.

I typed the interface wrong - it shouldn't have been "eno" - it should have been "em0".