Register for the iXsystems Community to get an ad-free experience and exclusive discounts in our eBay Store.

Wake-on-lan (WOL) not working on HP Proliant P4500

Western Digital Drives - The Preferred Drives of FreeNAS and TrueNAS CORE

pvdp

Neophyte
Joined
Apr 14, 2021
Messages
4
Hi,

I'm running TrueNAS Core 12.0 U3 on HP Proliant P4500.
I'm having problems with Wake-On-LAN. Whenever I shutdown TrueNAS I can't get it started again using WOL.

Network cards support it (see below) and is configured correctly as far as I can tell.
Before switching over to TrueNAS Core I had an ArchLinux setup running and never had any issues with WOL after shutdown...it just worked.

Any help/suggestions appreciated. Thx

Pieter

========================================
ifconfig output:
========================================
Code:
igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        capabilities=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether ac:16:2d:be:1f:9c
        inet 192.168.0.40 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
        nd6 options=1<PERFORMNUD>
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        capabilities=e53fbb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_UCAST,WOL_MCAST,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether ac:16:2d:be:1f:9d
        inet 192.168.0.110 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
        supported media:
                media autoselect
                media 1000baseT
                media 1000baseT mediaopt full-duplex
                media 100baseTX mediaopt full-duplex
                media 100baseTX
                media 10baseT/UTP mediaopt full-duplex
                media 10baseT/UTP
        nd6 options=1<PERFORMNUD>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        capabilities=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=0<> metric 0 mtu 33160
        groups: pflog

=========================================================================================================
 

Redcoat

Dedicated Sage
Joined
Feb 18, 2014
Messages
2,190
Two NIC's on same subnet?
 

pvdp

Neophyte
Joined
Apr 14, 2021
Messages
4
I'm wondering if apart from enabling WOL in the BIOS things like for example allowing PXE on the same interface is undoing the WOL functionality...
 

Redcoat

Dedicated Sage
Joined
Feb 18, 2014
Messages
2,190
Top