I was copying data to a SAMBA share on my FreeNAS server. The server locked up and would not respond. I reboot it and upon the reboot discovered that the volume status is unknown and will not import. I am not certain what this means or what to do to recover from this. I have tried a couple of basic commands to understand more and they are listed below with the output.
And this:
And this:
And this:
I am not completely sure what I am reviewing here. However, if I had to guess, it looks like one of the drives has failed???
P.S. FreeNAS installation details:
Code:
root@XXXXXX:~ # zpool import pool: XXXXXX_VOLUME id: 17870302958259361307 state: UNAVAIL status: One or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://illumos.org/msg/ZFS-8000-6X config: XXXXXX_VOLUME UNAVAIL missing device gptid/4de1011e-52b9-11e6-9828-e4115b1386c2 ONLINE gptid/4f0bbd79-52b9-11e6-9828-e4115b1386c2 ONLINE gptid/519430b4-52b9-11e6-9828-e4115b1386c2 ONLINE gptid/52c94b22-52b9-11e6-9828-e4115b1386c2 ONLINE Additional devices are known to be part of this pool, though their exact configuration cannot be determined.
And this:
Code:
root@XXXXXX:~ # camcontrol devlist <WDC WD20EARX-00PASB0 51.0AB51> at scbus0 target 0 lun 0 (pass0,ada0) <WDC WD20EARX-00PASB0 51.0AB51> at scbus1 target 0 lun 0 (pass1,ada1) <WDC WD20EARX-00PASB0 51.0AB51> at scbus2 target 0 lun 0 (pass2,ada2) <VB0250EAVER HPG0> at scbus5 target 0 lun 0 (pass3,ada3) <SanDisk SanDisk Cruzer 8.02> at scbus7 target 0 lun 0 (pass4,da0)
And this:
Code:
root@XXXXXX:~ # gpart show => 34 3907029101 ada0 GPT (1.8T) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5K) => 34 3907029101 ada1 GPT (1.8T) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5K) => 34 3907029101 ada2 GPT (1.8T) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 3902834696 2 freebsd-zfs (1.8T) 3907029128 7 - free - (3.5K) => 34 488397101 ada3 GPT (233G) 34 94 - free - (47K) 128 4194304 1 freebsd-swap (2.0G) 4194432 484202696 2 freebsd-zfs (231G) 488397128 7 - free - (3.5K) => 34 15753148 da0 GPT (7.5G) 34 1024 1 bios-boot (512K) 1058 6 - free - (3.0K) 1064 15752112 2 freebsd-zfs (7.5G) 15753176 6 - free - (3.0K)
And this:
Code:
root@XXXXXX:~ # glabel status Name Status Components gptid/517bc3c7-52b9-11e6-9828-e4115b1386c2 N/A ada0p1 gptid/519430b4-52b9-11e6-9828-e4115b1386c2 N/A ada0p2 gptid/52b4baa0-52b9-11e6-9828-e4115b1386c2 N/A ada1p1 gptid/52c94b22-52b9-11e6-9828-e4115b1386c2 N/A ada1p2 gptid/4ef4b36f-52b9-11e6-9828-e4115b1386c2 N/A ada2p1 gptid/4f0bbd79-52b9-11e6-9828-e4115b1386c2 N/A ada2p2 gptid/4dc6ffe8-52b9-11e6-9828-e4115b1386c2 N/A ada3p1 gptid/4de1011e-52b9-11e6-9828-e4115b1386c2 N/A ada3p2 gptid/e5a82590-7f85-11e5-a5e9-000c29b5b5ba N/A da0p1
I am not completely sure what I am reviewing here. However, if I had to guess, it looks like one of the drives has failed???
- Can anyone confirm this?
- Also, what are the correct next steps from here
P.S. FreeNAS installation details:
- FreeNAS-11.0-U3 (c5dcf4416)
- Platform: AMD Turion(tm) II Neo N40L Dual-Core Processor
- Memory: 7897 MB (ECC)
- Hardware: HP Microserver N40L
Last edited: