upgrade to 11.2-U3 and now jails have no network access

phynias

phynias

Dabbler
Joined
May 1, 2014
Messages
12
so i upgraded from FreeNAS-11.2-RELEASE-U1 to FreeNAS-11.2-U3 and now all my jails no longer can hit anything.

ifconfig of host:
Code:
re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 68:1c:a2:12:eb:f9
        hwaddr 68:1c:a2:12:eb:f9
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
re1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 68:1c:a2:12:eb:f9
        hwaddr 68:1c:a2:12:eb:f9
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
igb0: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether 70:85:c2:6b:1b:29
        hwaddr 70:85:c2:6b:1b:29
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: no carrier
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
        ether 68:1c:a2:12:eb:f9
        inet 192.168.1.200 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet autoselect
        status: active
        groups: lagg
        laggproto lacp lagghash l2,l3,l4
        laggport: re0 flags=18<COLLECTING,DISTRIBUTING>
        laggport: re1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING>
tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: Attached to mydocker
        options=80000<LINKSTATE>
        ether 00:bd:64:bc:f7:00
        hwaddr 00:bd:64:bc:f7:00
        nd6 options=1<PERFORMNUD>
        media: Ethernet autoselect
        status: active
        groups: tap
        Opened by PID 3822
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 02:9a:22:61:80:00
        nd6 options=1<PERFORMNUD>
        groups: bridge
        id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
        root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
        member: vnet0:13 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 14 priority 128 path cost 2000
        member: vnet0:10 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 12 priority 128 path cost 2000
        member: vnet0:8 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 15 priority 128 path cost 2000
        member: vnet0:6 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 13 priority 128 path cost 2000
        member: vnet0:4 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 11 priority 128 path cost 2000
        member: vnet0:3 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 10 priority 128 path cost 2000
        member: vnet0:2 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 9 priority 128 path cost 2000
        member: vnet0:1 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 8 priority 128 path cost 2000
        member: lagg0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 5 priority 128 path cost 2000000
        member: tap0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 6 priority 128 path cost 2000000
vnet0:1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: subsonic as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:0d:0f:d3
        hwaddr 02:e2:d0:00:08:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:2: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: lidarr as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:bf:cd:2e
        hwaddr 02:e2:d0:00:09:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:3: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: sabnzbd as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:ef:4d:38
        hwaddr 02:e2:d0:00:0a:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:4: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: owncloud as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:05:fb:85
        hwaddr 02:e2:d0:00:0b:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:6: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: plexserver as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:d2:7d:8f
        hwaddr 02:e2:d0:00:0d:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:8: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: transmission as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:03:aa:46
        hwaddr 02:e2:d0:00:0f:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:10: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: radarr as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:c1:df:ca
        hwaddr 02:e2:d0:00:0c:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair
vnet0:13: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: associated with jail: sonarr as nic: epair0b
        options=8<VLAN_MTU>
        ether 02:ff:60:a5:a4:7e
        hwaddr 02:e2:d0:00:0e:0a
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair


ifconfig from inside a jail:
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
        groups: lo
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:ff:60:05:fb:86
        hwaddr 02:e2:d0:00:0c:0b
        inet 192.168.1.204 netmask 0xffffff00 broadcast 192.168.1.255
        nd6 options=1<PERFORMNUD>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
        groups: epair


i've already tried the renaming of the interface via iocage exec. the jails all seem to have a default route.
stuck and need some help. thanks!
 
Last edited:
D

dlavigne

Guest
Your igb0 is showing as "no carrier". (I assume you want to use it rather than the Realteks?)
 
phynias

phynias

Dabbler
Joined
May 1, 2014
Messages
12
no, i'm using the realteks in a lagg. which has worked great for a while.
 
You must log in or register to reply here.

Important Announcement for the TrueNAS Community.

The TrueNAS Community has now been moved. This forum will now become READ-ONLY for historical purposes. Please feel free to join us on the new TrueNAS Community Forums.

Related topics on forums.truenas.com for thread: "upgrade to 11.2-U3 and now jails have no network access"

Similar threads

M
  • Locked
iocage VMs and multiple bridges problems
Replies
9
Views
4K
short-stack
short-stack
kdragon75
  • Locked
Broken Jail Networking 11.1U6
Replies
2
Views
2K
kdragon75
kdragon75
rodofrn
  • Locked
Very slow transfer speeds.
Replies
17
Views
6K
Elliot Dierksen
Elliot Dierksen
N
Help getting 10 gig Peer to Peer working
Replies
16
Views
6K
Redcoat
Redcoat
K
FreeNAS kernel arp attempts to modify permanent
Replies
2
Views
3K
dlavigne
D
Top