Hello,
I recently noticed I was a couple updates behind and used the GUI to update to 11.2 U6.
Unfortunately the system would not come back up Instead posting a "BTX Haulted error"
Thinking it was simply a failed updated (but not wanting to take the chance that it was not. I pulled the Satadom serving as the boot drive installed a new SSD and did a fresh install of 11.2 U6 hoping I could simply restore the config and move on.
Unfortunately once the install was complete and I rebooted I got the same error.
My base system is :
MotherBoad: X9DRi-LN4F+
Processors:: 2x Intel® Xeon® E5-2680
RAM: 192 GB ECC
Controller:: 3x LSI 9210-8i ARRAY CONTROLLER (IT Mode)
Case: SC846BA-R920B 24 X3.5" drive Bays
Boot drive: SUPERMICRO 32GB SATA SMC SATADOM Mfg. Part#: SSD-DM032-SMCMVN1
Secondary drive: Samsung 850 Pro 512GB (intended for Jails/vms)
Storage array: 11x WD Red 4TB NAS Hard Disk Drive - 5400
with the new boot drive being a WD blue 250GB ssd
Anyone have any Recommendations or Ideas?
UPDATE: I have tried reinstalling using U5, and U4.1 and have the same issue.
also: The sata setting in bios is set to AHCI
I recently noticed I was a couple updates behind and used the GUI to update to 11.2 U6.
Unfortunately the system would not come back up Instead posting a "BTX Haulted error"
Thinking it was simply a failed updated (but not wanting to take the chance that it was not. I pulled the Satadom serving as the boot drive installed a new SSD and did a fresh install of 11.2 U6 hoping I could simply restore the config and move on.
Unfortunately once the install was complete and I rebooted I got the same error.
My base system is :
MotherBoad: X9DRi-LN4F+
Processors:: 2x Intel® Xeon® E5-2680
RAM: 192 GB ECC
Controller:: 3x LSI 9210-8i ARRAY CONTROLLER (IT Mode)
Case: SC846BA-R920B 24 X3.5" drive Bays
Boot drive: SUPERMICRO 32GB SATA SMC SATADOM Mfg. Part#: SSD-DM032-SMCMVN1
Secondary drive: Samsung 850 Pro 512GB (intended for Jails/vms)
Storage array: 11x WD Red 4TB NAS Hard Disk Drive - 5400
with the new boot drive being a WD blue 250GB ssd
Anyone have any Recommendations or Ideas?
UPDATE: I have tried reinstalling using U5, and U4.1 and have the same issue.
also: The sata setting in bios is set to AHCI
Last edited: