Kristoffer Nilsen
Cadet
- Joined
- Sep 11, 2015
- Messages
- 7
I have 10 drives in a ZFS pool and everything has been working great for about a year. 9 drives of 2TB and 1 drive of 3TB.
My motherboard died and I had to replace it. Luckly I had a identical motherboard at hand.
It's a motherboard from a HP XW6400. CPU is Intel(R) Xeon(R) CPU 5130 @ 2.00GHz. 8GB DDR2 RAM.
Chipset Type: Intel 5000X
Processor Socket: LGA771
RAM Technology: DDR2 SDRAM / ECC
Memory Speed: 667 MHz
Memory Specification Compliance: PC2-5300
Drives: WD Desktop Green
RAID Cards: 2x LSI 1064E-IR
I had 2 pools. Named pool01 and pool02 (great naming, I know).
When I booted the system up again with the new motherboard I ran the command "zpool import -f"
pool01 cam up with no problems, but the importent, large pool02 did not. I have used the last two days trying to reinstall OS, change position of the drives (changing up the sata-connections etc). But i'm finding no luck.
It looks like one drive are missing from pool02, but the drive is connected and I don't see any error.
I'm about to give up now, but I really hope there are someone out there who can help me.
Here are som data:
FreeNAS-9.3-STABLE-201506292332
I would really appreciate if anyone can give me some help, if possible.
My motherboard died and I had to replace it. Luckly I had a identical motherboard at hand.
It's a motherboard from a HP XW6400. CPU is Intel(R) Xeon(R) CPU 5130 @ 2.00GHz. 8GB DDR2 RAM.
Chipset Type: Intel 5000X
Processor Socket: LGA771
RAM Technology: DDR2 SDRAM / ECC
Memory Speed: 667 MHz
Memory Specification Compliance: PC2-5300
Drives: WD Desktop Green
RAID Cards: 2x LSI 1064E-IR
I had 2 pools. Named pool01 and pool02 (great naming, I know).
When I booted the system up again with the new motherboard I ran the command "zpool import -f"
pool01 cam up with no problems, but the importent, large pool02 did not. I have used the last two days trying to reinstall OS, change position of the drives (changing up the sata-connections etc). But i'm finding no luck.
It looks like one drive are missing from pool02, but the drive is connected and I don't see any error.
I'm about to give up now, but I really hope there are someone out there who can help me.
Here are som data:
FreeNAS-9.3-STABLE-201506292332
Code:
[root@nas2] ~# zpool import -f
pool: pool02
id: 7346222624618935135
state: UNAVAIL
status: The pool was last accessed by another system.
action: The pool cannot be imported due to damaged devices or data.
see: http://illumos.org/msg/ZFS-8000-EY
config:
pool02 UNAVAIL missing device
raidz1-1 ONLINE
gptid/f42669d6-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/f58467d3-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/f673a2ac-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/f72d88e7-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/f8364ceb-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/f9616ed7-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/fae1348e-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/fc1a58c0-bbae-11e4-a886-001cc41ff072 ONLINE
gptid/fd068f4b-bbae-11e4-a886-001cc41ff072 ONLINECode:
[root@nas2] ~# camcontrol devlist <ATA ST33000651AS CC43> at scbus0 target 1 lun 0 (pass0,da0) <ATA ST2000DM001-9YN1 CC4B> at scbus0 target 2 lun 0 (pass1,da1) <ATA WDC WD20EARX-55P AB51> at scbus0 target 3 lun 0 (pass2,da2) <ATA WDC WD20EARX-00P AB51> at scbus2 target 1 lun 0 (pass3,da3) <ATA WDC WD20EARX-00P AB51> at scbus2 target 2 lun 0 (pass4,da4) <ATA WDC WD20EARX-00P AB51> at scbus2 target 3 lun 0 (pass5,da5) <ST2000DL003-9VT166 CC98> at scbus5 target 0 lun 0 (pass6,ada0) <WDC WD20EARX-00PASB0 51.0AB51> at scbus6 target 0 lun 0 (pass7,ada1) <WDC WD20EARS-00MVWB0 51.0AB51> at scbus7 target 0 lun 0 (pass8,ada2) <WDC WD20EARX-00PASB0 51.0AB51> at scbus8 target 0 lun 0 (pass9,ada3) <Verbatim STORE N GO 1100> at scbus12 target 0 lun 0 (pass10,da6)
Code:
[root@nas2] /# dmesg
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p16 #1 r281084+74d0d7a: Mon Jun 29 14:32:16 PDT 2015
root@build3.ixsystems.com:/tank/home/jkh/build/FN/objs/os-base/amd64/tank/home/jkh/build/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (1995.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6f6 Family = 0x6 Model = 0xf Stepping = 6
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4e33d<SSE3,DTES64,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 9395240960 (8960 MB)
avail memory = 8230187008 (7848 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <COMPAQ GREENCRK>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ACPI Error: 32/64X address mismatch in Gpe0Block: 0x0000F828/0x000000000001F030, using 32 (20111123/tbfadt-470)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ispfw: registered firmware <isp_1040>
ispfw: registered firmware <isp_1040_it>
ispfw: registered firmware <isp_1080>
ispfw: registered firmware <isp_1080_it>
ispfw: registered firmware <isp_12160>
ispfw: registered firmware <isp_12160_it>
ispfw: registered firmware <isp_2100>
ispfw: registered firmware <isp_2200>
ispfw: registered firmware <isp_2300>
ispfw: registered firmware <isp_2322>
ispfw: registered firmware <isp_2400>
ispfw: registered firmware <isp_2400_multi>
ispfw: registered firmware <isp_2500>
ispfw: registered firmware <isp_2500_multi>
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <HPQOEM SLIC-WKS> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci16: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci16
pci30: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci30
pci32: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci30
pci31: <ACPI PCI bus> on pcib4
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x006001> mem 0xf2200000-0xf220ffff irq 17 at device 0.0 on pci31
bge0: CHIP ID 0x00006001; ASIC REV 0x06; CHIP REV 0x60; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5752 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:1c:c4:1f:f0:72
pcib5: <PCI-PCI bridge> mem 0xf2301000-0xf2301fff at device 0.3 on pci16
pci17: <PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci96: <ACPI PCI bus> on pcib6
mpt0: <LSILogic SAS/SATA Adapter> port 0x2000-0x20ff mem 0xf2110000-0xf2113fff,0xf2100000-0xf210ffff irq 16 at device 0.0 on pci96
mpt0: MPI Version=1.5.12.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci64: <ACPI PCI bus> on pcib7
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem 0xf0000000-0xf0ffffff,0xd0000000-0xdfffffff,0xf1000000-0xf1ffffff irq 16 at device 0.0 on pci64
vgapci0: Boot video device
pcib8: <PCI-PCI bridge> at device 5.0 on pci0
pci254: <PCI bus> on pcib8
pcib9: <PCI-PCI bridge> at device 6.0 on pci0
pci253: <PCI bus> on pcib9
pcib10: <PCI-PCI bridge> at device 7.0 on pci0
pci252: <PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci128: <ACPI PCI bus> on pcib11
mpt1: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem 0xf2010000-0xf2013fff,0xf2000000-0xf200ffff irq 16 at device 0.0 on pci128
mpt1: MPI Version=1.5.12.0
mpt1: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt1: 0 Active Volumes (2 Max)
mpt1: 0 Hidden Drive Members (10 Max)
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port 0x4000-0x401f irq 16 at device 29.0 on pci0
usbus0 on uhci0
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port 0x4020-0x403f irq 19 at device 29.1 on pci0
usbus1 on uhci1
uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port 0x4040-0x405f irq 18 at device 29.2 on pci0
usbus2 on uhci2
uhci3: <Intel 631XESB/632XESB/3100 USB controller USB-4> port 0x4060-0x407f irq 23 at device 29.3 on pci0
usbus3 on uhci3
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xf2400000-0xf24003ff irq 16 at device 29.7 on pci0
usbus4: EHCI version 1.0
usbus4 on ehci0
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib12
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40c0-0x40cf irq 17 at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ahci0: <Intel ESB2 AHCI SATA controller> port 0x40e0-0x40e7,0x40f8-0x40fb,0x40e8-0x40ef,0x40fc-0x40ff,0x4080-0x409f mem 0xf2400400-0xf24007ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.10 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ichwd0 on isa0
ichwd0: resuming after hardware watchdog timeout
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen4.2: <Verbatim> at usbus4
umass0: <Verbatim STORE N GO, class 0/0, rev 2.10/11.00, addr 2> on usbus4
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:12:0:-1: Attached to scbus12
da0 at mpt0 bus 0 scbus0 target 1 lun 0
da0: <ATA ST33000651AS CC43> Fixed Direct Access SCSI-5 device
da0: Serial Number 9XK0C20Y
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 2097151MB (4294967295 512 byte sectors: 255H 63S/T 267349C)
da1 at mpt0 bus 0 scbus0 target 2 lun 0
da1: <ATA ST2000DM001-9YN1 CC4B> Fixed Direct Access SCSI-5 device
da1: Serial Number Z1F17L7V
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1: quirks=0x8<4K>
da2 at mpt0 bus 0 scbus0 target 3 lun 0
da2: <ATA WDC WD20EARX-55P AB51> Fixed Direct Access SCSI-5 device
da2: Serial Number WD-WCAZAJ286546
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2: quirks=0x8<4K>
da3 at mpt1 bus 0 scbus2 target 1 lun 0
da3: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-5 device
da3: Serial Number WD-WCAZA9730138
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3: quirks=0x8<4K>
da4 at mpt1 bus 0 scbus2 target 2 lun 0
da4: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-5 device
da4: Serial Number WD-WCAZA9556853
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4: quirks=0x8<4K>
ada0 at ahcich0 bus 0 scbus5 target 0 lun 0
da5 at mpt1 bus 0 scbus2 target 3 lun 0
da5: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-5 device
da5: Serial Number WD-WCAZAC299396
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5: quirks=0x8<4K>
da6 at umass-sim0 bus 0 scbus12 target 0 lun 0
da6: <Verbatim STORE N GO 1100> Removable Direct Access SCSI-6 device
da6: Serial Number 1208000000000001
da6: 40.000MB/s transfers
da6: 15376MB (31490048 512 byte sectors: 255H 63S/T 1960C)
da6: quirks=0x2<NO_6_BYTE>
ada0: <ST2000DL003-9VT166 CC98> ATA-8 SATA 2.x device
ada0: Serial Number 5YD8X6HL
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus6 target 0 lun 0
ada1: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device
ada1: Serial Number WD-WCAZAL013711
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus7 target 0 lun 0
ada2: <WDC WD20EARS-00MVWB0 51.0AB51> ATA-8 SATA 2.x device
ada2: Serial Number WD-WCAZA1234395
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada2: quirks=0x1<4K>
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus8 target 0 lun 0
ada3: <WDC WD20EARX-00PASB0 51.0AB51> ATA-8 SATA 3.x device
ada3: Serial Number WD-WCAZAF232373
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: quirks=0x1<4K>
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
Timecounter "TSC" frequency 1995040806 Hz quality 1000
GEOM: da0: corrupt or invalid GPT detected.
GEOM: da0: GPT rejected -- may not be recoverable.
Trying to mount root from zfs:freenas-boot/ROOT/default []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
driver bug: Unable to set devclass (devname: (null))
vboxdrv: fAsync=0 offMin=0x3ba offMax=0xc96I would really appreciate if anyone can give me some help, if possible.
Last edited:
