Unable to access Plex Web Interface - Check your firewall!

Did your firewall ever screw you over?

  • Yes

    Votes: 3 60.0%

  • No

    Votes: 2 40.0%
  • Total voters
    5
Status
Not open for further replies.
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Windows firewall was blocking port 3240 outbound!​

I just switched motherboards on my FreeNas box and I am now unable to access plex from the web interface. I am currently running FreeNAS-9.3-STABLE-201506292130 with Plex plugin on 0.9.12.8.1362
All my other plugins are working fine (couchpotato, sickrage, emby, transmission) and are fully updated.

I have tried reinstalling the plugin a few times and even checked the Preferences.xml for IPv6 stuff.
As of right now the Plex plugin is a fresh install.

I have been able to access the Plex server via DLNA as shown by 10.0.1.6 on netstat however going to http://10.0.1.75:32400/web/index.html gives me a "ERR_NETWORK_ACCESS_DENIED" in chrome.
upload_2015-8-18_17-34-51.png
upload_2015-8-18_17-35-51.png



Code:
root@plexmediaserver_1:/ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair3b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:34:7c:00:16:0b
        inet 10.0.1.75 netmask 0xffffff00 broadcast 10.0.1.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
root@plexmediaserver_1:/ # netstat -a
Active Internet connections (including servers)
Proto Recv-Q Send-Q Local Address          Foreign Address        (state)
tcp4       0      0 plexmediaserver_.12354 10.0.1.190.33102       TIME_WAIT
tcp4       0      0 plexmediaserver_.49044 10.0.1.13.49200        CLOSE_WAIT
tcp4       0      0 plexmediaserver_.49043 10.0.1.13.49200        CLOSE_WAIT
tcp4       0      0 plexmediaserver_.49042 10.0.1.13.49200        CLOSE_WAIT
tcp4       0      0 plexmediaserver_.49034 10.0.1.7.50000         CLOSE_WAIT
tcp4       0      0 plexmediaserver_.49033 10.0.1.12.49302        TIME_WAIT
tcp4       0      0 plexmediaserver_.49028 ord08s11-in-f9.1.http  TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56279         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56278         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56263         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56262         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56261         ESTABLISHED
tcp4       0      0 plexmediaserver_.49024 10.0.1.3.8096          TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56260         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56259         TIME_WAIT
tcp4       0      0 localhost.32400        localhost.16790        FIN_WAIT_2
tcp4       0      0 localhost.16790        localhost.32400        CLOSE_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56236         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56235         TIME_WAIT
tcp4       0      0 plexmediaserver_.49835 10.0.1.6.32469         TIME_WAIT
tcp4       0      0 plexmediaserver_.32469 10.0.1.6.56228         TIME_WAIT
tcp4       0      0 *.32469                *.*                    LISTEN
tcp4       0      0 *.1254                 *.*                    LISTEN
tcp4       0      0 plexmediaserver_.32400 plexmediaserver_.51774 TIME_WAIT
tcp4       0      0 localhost.32400        localhost.41813        TIME_WAIT
tcp4       0      0 plexmediaserver_.32400 plexmediaserver_.41547 TIME_WAIT
tcp4       0      0 localhost.30523        localhost.63483        TIME_WAIT
tcp4       0      0 localhost.63483        localhost.60207        FIN_WAIT_2
tcp4       0      0 localhost.60207        localhost.63483        CLOSE_WAIT
tcp4       0      0 *.63483                *.*                    LISTEN
tcp4       0      0 localhost.32400        localhost.38546        TIME_WAIT
tcp4       0      0 localhost.32400        localhost.49177        TIME_WAIT
tcp4       0      0 plexmediaserver_.12354 *.*                    LISTEN
tcp4       0      0 localhost.32400        localhost.58572        TIME_WAIT
tcp4       0      0 localhost.32400        localhost.47994        TIME_WAIT
tcp4       0      0 *.32401                *.*                    LISTEN
tcp4       0      0 *.32400                *.*                    LISTEN
udp4       0      0 *.19793                *.*
udp4       0      0 *.62006                *.*
udp4       0      0 *.15325                *.*
udp4       0      0 *.12604                *.*
udp4       0      0 *.1900                 *.*
udp4       0      0 plexmediaserver_.34130 *.*
udp4       0      0 localhost.33364        *.*
udp4       0      0 plexmediaserver_.64884 *.*
udp4       0      0 localhost.43854        *.*
udp4       0      0 *.32413                *.*
udp4       0      0 *.32412                *.*
udp4       0      0 *.32410                *.*
udp4       0      0 *.32414                *.*
udp4       0      0 *.syslog               *.*
udp6       0      0 *.syslog               *.*
Active UNIX domain sockets
Address  Type   Recv-Q Send-Q    Inode     Conn     Refs  Nextref Addr
fffffe0083bf4b40 dgram       0      0        0 fffffe0038c7f5a0 fffffe0038c7f5a0        0
fffffe0038c7f5a0 dgram       0      0        0 fffffe0083bf4b40 fffffe0083bf4b40        0
fffffe0204fdab40 dgram       0      0        0 fffffe01445f0a50 fffffe01445f0a50        0
fffffe01445f0a50 dgram       0      0        0 fffffe0204fdab40 fffffe0204fdab40        0
fffffe02146474b0 dgram       0      0        0 fffffe01027993c0 fffffe01027993c0        0
fffffe01027993c0 dgram       0      0        0 fffffe02146474b0 fffffe02146474b0        0
fffffe01027f1a50 dgram       0      0        0 fffffe01e4ddcc30 fffffe01e4ddcc30        0
fffffe01e4ddcc30 dgram       0      0        0 fffffe01027f1a50 fffffe01027f1a50        0
fffffe0189f9e5a0 dgram       0      0        0 fffffe01027f1e10 fffffe01027f1e10        0
fffffe01027f1e10 dgram       0      0        0 fffffe0189f9e5a0 fffffe0189f9e5a0        0
fffffe0083bf4690 dgram       0      0        0 fffffe0083bf4e10 fffffe0083bf4e10        0
fffffe0083bf4e10 dgram       0      0        0 fffffe0083bf4690 fffffe0083bf4690        0
fffffe0204fdac30 dgram       0      0        0 fffffe01783e82d0 fffffe01783e82d0        0
fffffe01783e82d0 dgram       0      0        0 fffffe0204fdac30 fffffe0204fdac30        0
fffffe0038aa0960 dgram       0      0        0 fffffe0195a0d0f0 fffffe0195a0d0f0        0
fffffe0195a0d0f0 dgram       0      0        0 fffffe0038aa0960 fffffe0038aa0960        0
fffffe01b513b3c0 dgram       0      0        0 fffffe001d7d4e10 fffffe001d7d4e10        0
fffffe001d7d4e10 dgram       0      0        0 fffffe01b513b3c0 fffffe01b513b3c0        0
fffffe01027f11e0 dgram       0      0        0 fffffe021410dd20 fffffe021410dd20        0
fffffe021410dd20 dgram       0      0        0 fffffe01027f11e0 fffffe01027f11e0        0
fffffe001d920e10 dgram       0      0        0 fffffe0038b18a50 fffffe0038b18a50        0
fffffe0038b18a50 dgram       0      0        0 fffffe001d920e10 fffffe001d920e10        0
fffffe001d86a870 dgram       0      0        0 fffffe01027fc870 fffffe01027fc870        0
fffffe01027fc870 dgram       0      0        0 fffffe001d86a870 fffffe001d86a870        0
fffffe00365c81e0 dgram       0      0        0 fffffe001d839d20 fffffe001d839d20        0
fffffe001d839d20 dgram       0      0        0 fffffe00365c81e0 fffffe00365c81e0        0
fffffe001d920a50 dgram       0      0        0 fffffe01b513a960        0        0
fffffe01b513a960 dgram       0      0 fffffe015b0a1dc8        0 fffffe001d920a50        0 /var/run/logpriv
fffffe01e4dd82d0 dgram       0      0 fffffe014e29adc8        0        0        0 /var/run/log
 
Last edited:
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
I'm currently using the built-in motherboard Ethernet ports which is a Intel® 82576 GbE. I have tried many things from static & DHCP IP's.
The Plex plugin displays the correct icon under Plugins > Installed, which pointed out an issue for some people if it did not display.
One more piece of information I have not listed is that I'm not running FreeNas in a VM.
I can ping to/from the plexmediaserver_1 jail.

Here is a new command dump using DHCP for the Plex jail (Yes I tested 10.0.1.16:32400/web/index.html and the web interface does not work, however DLNA does work on 10.0.1.16)


Code:
root@plexmediaserver_1:/ # ifconfig -a                                                                                      
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                           
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>                                                               
        inet6 ::1 prefixlen 128                                                                                             
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1                                                                          
        inet 127.0.0.1 netmask 0xff000000                                                                                   
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>                                                                           
epair3b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                               
        options=8<VLAN_MTU>                                                                                                 
        ether 02:34:7c:00:16:0a                                                                                             
        inet 10.0.1.16 netmask 0xffffff00 broadcast 10.0.1.255                                                              
        nd6 options=9<PERFORMNUD,IFDISABLED>                                                                                
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                 
        status: active                       
                                                                        
root@plexmediaserver_1:/ # netstat -rn                                                                                      
Routing tables                                                                                                              
                                                                                                                            
Internet:                                                                                                                   
Destination        Gateway            Flags    Refs      Use  Netif Expire                                                  
default            10.0.1.1           UGS         0      897 epair3                                                         
10.0.1.0/24        link#2             U           0     1261 epair3                                                         
10.0.1.16          link#2             UHS         0      156    lo0                                                         
127.0.0.1          link#1             UH          0      169    lo0                                                         
                                                                                                                            
Internet6:                                                                                                                  
Destination                       Gateway                       Flags      Netif Expire                                     
::/96                             ::1                           UGRS        lo0                                             
::1                               link#1                        UH          lo0                                             
::ffff:0.0.0.0/96                 ::1                           UGRS        lo0                                             
fe80::/10                         ::1                           UGRS        lo0                                             
fe80::%lo0/64                     link#1                        U           lo0                                             
fe80::1%lo0                       link#1                        UHS         lo0                                             
ff01::%lo0/32                     ::1                           U           lo0                                             
ff02::/16                         ::1                           UGRS        lo0                                             
ff02::%lo0/32                     ::1                           U           lo0
                                         
root@plexmediaserver_1:/ # ps auxww                                                                                         
USER    PID %CPU %MEM    VSZ   RSS TT  STAT STARTED    TIME COMMAND                                                         
root  89786  0.0  0.0  12084  1708 ??  IsJ   3:49AM 0:00.00 dhclient: epair3b [priv] (dhclient)                             
root  89922  0.0  0.4 150724 32168 ??  IJ    3:50AM 0:01.80 /usr/pbi/plexmediaserver-amd64/bin/python2.7 /usr/pbi/plexmediaserver-am
d64/control.py start 10.0.1.16 12354                                                                                        
_dhcp 89923  0.0  0.0  12084  1748 ??  IsJ   3:50AM 0:00.00 dhclient: epair3b (dhclient)                                    
root  90311  0.0  0.0  12080  1660 ??  SsJ   3:50AM 0:00.01 /usr/sbin/syslogd -s                                            
plex  90361  0.0  0.5 274604 41196 ??  IsJ   3:50AM 0:00.66 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex_Media_Server (
Plex Media Server)                                                                                                          
root  90369  0.0  0.0  14184  1636 ??  SsJ   3:50AM 0:00.00 /usr/sbin/cron -s                                               
plex  90521  0.0  0.9 372284 71752 ??  SNJ   3:50AM 0:06.86 Plex Plug-in [com.plexapp.system] /usr/pbi/plexmediaserver-amd64/share/p
lexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.1
2.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/System.bundle (python)     
plex  92040  0.0  0.4 297256 34024 ??  SJ    3:50AM 0:01.72 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex DLNA Server
root  46433  0.0  0.0  17568  3316  0  SsJ   4:11AM 0:00.02 /bin/csh                                                        
root  46732  0.0  0.0  16296  1876  0  R+J   4:20AM 0:00.00 ps auxww

root@plexmediaserver_1:/ # sockstat -4
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
plex Plex DLNA 92040 12 udp4 *:1900 *:*
plex Plex DLNA 92040 15 tcp4 *:1777 *:*
plex Plex DLNA 92040 18 udp4 *:12471 *:*
plex Plex DLNA 92040 21 udp4 *:14839 *:*
plex Plex DLNA 92040 24 tcp4 *:32469 *:*
plex Plex DLNA 92040 27 udp4 *:16093 *:*
plex Plex DLNA 92040 30 udp4 *:55733 *:*
plex Plex DLNA 92040 58 tcp4 127.0.0.1:60405 127.0.0.1:31434
plex python 90521 7 tcp4 *:31434 *:*
plex Plex Media 90361 52 tcp4 *:32400 *:*
plex Plex Media 90361 53 tcp4 *:32401 *:*
plex Plex Media 90361 64 udp4 *:32414 *:*
plex Plex Media 90361 65 udp4 *:32410 *:*
plex Plex Media 90361 66 udp4 *:32412 *:*
plex Plex Media 90361 67 udp4 *:32413 *:*
plex Plex Media 90361 68 udp4 127.0.0.1:51488 *:*
plex Plex Media 90361 69 udp4 10.0.1.16:44051 *:*
plex Plex Media 90361 70 udp4 127.0.0.1:61326 *:*
plex Plex Media 90361 71 udp4 10.0.1.16:18757 *:*
root syslogd 90311 7 udp4 *:514 *:*
root python2.7 89922 3 tcp4 10.0.1.16:12354 *:*


Jails > Plex > Jail Settings (allow.raw_sockets=true & autostart+VIMAGE are also checked)
http://i.imgur.com/sVQXIQg.png

Network > Global Config
http://i.imgur.com/xCmYQAi.png

Network > Interfaces
http://i.imgur.com/5fWaXNd.png

Upon restarting the jail I get the following in the logs
Code:
Aug 21 04:31:52 NAS epair3a: Ethernet address: 02:58:7f:00:11:0a
Aug 21 04:31:52 NAS epair3b: Ethernet address: 02:58:7f:00:16:0b
Aug 21 04:31:52 NAS kernel: epair3a: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3a: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3b: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3b: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3a: promiscuous mode enabled
Aug 21 04:31:52 NAS kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b
Aug 21 04:31:52 NAS kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b


I want to completely remove plexmediaserver_1 and all its settings from FreeNas and then re-install it.
Normally you would just delete the jail/plugin and it would remove, but I have a feeling that there is something being left behind in the files from one of the previous plexmediaserver_#.
 
Last edited:
Joshua Parker Ruehlig

Joshua Parker Ruehlig

Hall of Famer
Joined
Dec 5, 2011
Messages
5,949
R2U2 said:
I'm currently using the built-in motherboard Ethernet ports which is a Intel® 82576 GbE. I have tried many things from static & DHCP IP's.
The Plex plugin displays the correct icon under Plugins > Installed, which pointed out an issue for some people if it did not display.
One more piece of information I have not listed is that I'm not running FreeNas in a VM.
I can ping to/from the plexmediaserver_1 jail.

Here is a new command dump using DHCP for the Plex jail (Yes I tested 10.0.1.16:32400/web/index.html and the web interface does not work, however DLNA does work on 10.0.1.16)


Code:
root@plexmediaserver_1:/ # ifconfig -a                                                                                     
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384                                                          
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>                                                              
        inet6 ::1 prefixlen 128                                                                                            
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1                                                                         
        inet 127.0.0.1 netmask 0xff000000                                                                                  
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>                                                                          
epair3b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500                                              
        options=8<VLAN_MTU>                                                                                                
        ether 02:34:7c:00:16:0a                                                                                            
        inet 10.0.1.16 netmask 0xffffff00 broadcast 10.0.1.255                                                             
        nd6 options=9<PERFORMNUD,IFDISABLED>                                                                               
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)                                                                
        status: active                      
                                                                       
root@plexmediaserver_1:/ # netstat -rn                                                                                     
Routing tables                                                                                                             
                                                                                                                           
Internet:                                                                                                                  
Destination        Gateway            Flags    Refs      Use  Netif Expire                                                 
default            10.0.1.1           UGS         0      897 epair3                                                        
10.0.1.0/24        link#2             U           0     1261 epair3                                                        
10.0.1.16          link#2             UHS         0      156    lo0                                                        
127.0.0.1          link#1             UH          0      169    lo0                                                        
                                                                                                                           
Internet6:                                                                                                                 
Destination                       Gateway                       Flags      Netif Expire                                    
::/96                             ::1                           UGRS        lo0                                            
::1                               link#1                        UH          lo0                                            
::ffff:0.0.0.0/96                 ::1                           UGRS        lo0                                            
fe80::/10                         ::1                           UGRS        lo0                                            
fe80::%lo0/64                     link#1                        U           lo0                                            
fe80::1%lo0                       link#1                        UHS         lo0                                            
ff01::%lo0/32                     ::1                           U           lo0                                            
ff02::/16                         ::1                           UGRS        lo0                                            
ff02::%lo0/32                     ::1                           U           lo0
                                        
root@plexmediaserver_1:/ # ps auxww                                                                                        
USER    PID %CPU %MEM    VSZ   RSS TT  STAT STARTED    TIME COMMAND                                                        
root  89786  0.0  0.0  12084  1708 ??  IsJ   3:49AM 0:00.00 dhclient: epair3b [priv] (dhclient)                            
root  89922  0.0  0.4 150724 32168 ??  IJ    3:50AM 0:01.80 /usr/pbi/plexmediaserver-amd64/bin/python2.7 /usr/pbi/plexmediaserver-am
d64/control.py start 10.0.1.16 12354                                                                                       
_dhcp 89923  0.0  0.0  12084  1748 ??  IsJ   3:50AM 0:00.00 dhclient: epair3b (dhclient)                                   
root  90311  0.0  0.0  12080  1660 ??  SsJ   3:50AM 0:00.01 /usr/sbin/syslogd -s                                           
plex  90361  0.0  0.5 274604 41196 ??  IsJ   3:50AM 0:00.66 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex_Media_Server (
Plex Media Server)                                                                                                         
root  90369  0.0  0.0  14184  1636 ??  SsJ   3:50AM 0:00.00 /usr/sbin/cron -s                                              
plex  90521  0.0  0.9 372284 71752 ??  SNJ   3:50AM 0:06.86 Plex Plug-in [com.plexapp.system] /usr/pbi/plexmediaserver-amd64/share/p
lexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.1
2.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/System.bundle (python)    
plex  92040  0.0  0.4 297256 34024 ??  SJ    3:50AM 0:01.72 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex DLNA Server
root  46433  0.0  0.0  17568  3316  0  SsJ   4:11AM 0:00.02 /bin/csh                                                       
root  46732  0.0  0.0  16296  1876  0  R+J   4:20AM 0:00.00 ps auxww

root@plexmediaserver_1:/ # sockstat -4
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
plex Plex DLNA 92040 12 udp4 *:1900 *:*
plex Plex DLNA 92040 15 tcp4 *:1777 *:*
plex Plex DLNA 92040 18 udp4 *:12471 *:*
plex Plex DLNA 92040 21 udp4 *:14839 *:*
plex Plex DLNA 92040 24 tcp4 *:32469 *:*
plex Plex DLNA 92040 27 udp4 *:16093 *:*
plex Plex DLNA 92040 30 udp4 *:55733 *:*
plex Plex DLNA 92040 58 tcp4 127.0.0.1:60405 127.0.0.1:31434
plex python 90521 7 tcp4 *:31434 *:*
plex Plex Media 90361 52 tcp4 *:32400 *:*
plex Plex Media 90361 53 tcp4 *:32401 *:*
plex Plex Media 90361 64 udp4 *:32414 *:*
plex Plex Media 90361 65 udp4 *:32410 *:*
plex Plex Media 90361 66 udp4 *:32412 *:*
plex Plex Media 90361 67 udp4 *:32413 *:*
plex Plex Media 90361 68 udp4 127.0.0.1:51488 *:*
plex Plex Media 90361 69 udp4 10.0.1.16:44051 *:*
plex Plex Media 90361 70 udp4 127.0.0.1:61326 *:*
plex Plex Media 90361 71 udp4 10.0.1.16:18757 *:*
root syslogd 90311 7 udp4 *:514 *:*
root python2.7 89922 3 tcp4 10.0.1.16:12354 *:*


Jails > Plex > Jail Settings (allow.raw_sockets=true & autostart+VIMAGE are also checked)
http://i.imgur.com/sVQXIQg.png

Network > Global Config
http://i.imgur.com/xCmYQAi.png

Network > Interfaces
http://i.imgur.com/5fWaXNd.png

Upon restarting the jail I get the following in the logs
Code:
Aug 21 04:31:52 NAS epair3a: Ethernet address: 02:58:7f:00:11:0a
Aug 21 04:31:52 NAS epair3b: Ethernet address: 02:58:7f:00:16:0b
Aug 21 04:31:52 NAS kernel: epair3a: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3a: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3b: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3b: link state changed to UP
Aug 21 04:31:52 NAS kernel: epair3a: promiscuous mode enabled
Aug 21 04:31:52 NAS kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b
Aug 21 04:31:52 NAS kernel: ng_ether_ifnet_arrival_event: can't re-name node epair3b


I want to completely remove plexmediaserver_1 and all its settings from FreeNas and then re-install it.
Normally you would just delete the jail/plugin and it would remove, but I have a feeling that there is something being left behind in the files from one of the previous plexmediaserver_#.
Click to expand...
It shouldn't be leaving behind anything when you delete the plugin (which will delete the associated jail/dataset), the only thing I would think would be left behind a possibly mountpoint settings.
I know there's the settings to disable security in the plex menu, left pane of the freenas webui. I wonder if you need to temporarily enable that?
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Joshua Parker Ruehlig said:
It shouldn't be leaving behind anything when you delete the plugin (which will delete the associated jail/dataset), the only thing I would think would be left behind a possibly mountpoint settings.
I know there's the settings to disable security in the plex menu, left pane of the freenas webui. I wonder if you need to temporarily enable that?
Click to expand...
No luck with the "Disable Security"

I will try again uninstalling plexmediaserver_1 then restarting and installing it again.
Who knows the computer gods might make it work again.
Edit: As expected there are no gods.
 
Last edited:
Joshua Parker Ruehlig

Joshua Parker Ruehlig

Hall of Famer
Joined
Dec 5, 2011
Messages
5,949
another guess, maybe try changing the IP of the jail and access from a different browser. also look for logs in /var/db/plexdata
 
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
Can you provide some hardware spec's that may offer some clues? Can you post a screenshot of trying to access the web interface of plex too?
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Joshua Parker Ruehlig said:
another guess, maybe try changing the IP of the jail and access from a different browser. also look for logs in /var/db/plexdata
Click to expand...

Looks like the Plex logs has some stuff going on.
https://www.dropbox.com/s/voujwtvhr9cpqyt/2015-08-21_13-02-07.txt?dl=0

Specs:
MB: Supermicro X8DTH-IF
CPU: x2 L5630
RAM: x1 Timetec Nanya 8GB ECC RDIMM (Had 2 more sticks but sent them for RMA)
HDDs: x3 3Tb HGST Deskstar NAS

Darren Myers said:
Can you provide some hardware spec's that may offer some clues? Can you post a screenshot of trying to access the web interface of plex too?
Click to expand...

upload_2015-8-21_13-9-13.png
 
Last edited:
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
For whatever reason the post didnt update...
R2U2 said:
Specs:
MB: Supermicro X8DTH-IF
CPU: L5630
RAM: 2X Timetec Nanya 8GB ECC RDIMM
HDDs: 5X 3T HGST NAS
Click to expand...

I have a similar motherboard in my FreeNAS server, so same NIC's more then likely, are you able to ping the Plex IP address? Have you tried different browsers? Have you tried doing http://<plex address>:32400/web ? and trying https://<plex address>:32400/web ?
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Darren Myers said:
For whatever reason the post didnt update...


I have a similar motherboard in my FreeNAS server, so same NIC's more then likely, are you able to ping the Plex IP address? Have you tried different browsers? Have you tried doing http://<plex address>:32400/web ? and trying https://<plex address>:32400/web ?
Click to expand...
I have tired http/https, Im going to do a restore to default settings.

Yup >.> those were the old specs

Specs:
MB: Supermicro X8DTH-IF
CPU: x2 L5630
RAM: x1 Timetec Nanya 8GB ECC RDIMM (Had 2 more sticks but sent them for RMA)
HDDs: x3 3Tb HGST Deskstar NAS


Looks like we got something!
I guess i need to reinstall FreeNas onto a USB?

Code:
Environment:

Software Version: FreeNAS-9.3-STABLE-201506292130
Request Method: POST
Request URL: http://10.0.1.190/system/config/restore/


Traceback:
File "/usr/local/www/freenasUI/../freenasUI/freeadmin/views.py" in server_error
  189.         tb = Advanced.objects.all().latest('id').adv_traceback
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in latest
  413.         return self._earliest_or_latest(field_name=field_name, direction="-")
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in _earliest_or_latest
  407.         return obj.get()
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in get
  304.         num = len(clone)
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in __len__
  77.         self._fetch_all()
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in _fetch_all
  857.             self._result_cache = list(self.iterator())
File "/usr/local/lib/python2.7/site-packages/django/db/models/query.py" in iterator
  220.         for row in compiler.results_iter():
File "/usr/local/lib/python2.7/site-packages/django/db/models/sql/compiler.py" in results_iter
  713.         for rows in self.execute_sql(MULTI):
File "/usr/local/lib/python2.7/site-packages/django/db/models/sql/compiler.py" in execute_sql
  786.         cursor.execute(sql, params)
File "/usr/local/lib/python2.7/site-packages/django/db/backends/util.py" in execute
  53.                 return self.cursor.execute(sql, params)
File "/usr/local/lib/python2.7/site-packages/django/db/utils.py" in __exit__
  99.                 six.reraise(dj_exc_type, dj_exc_value, traceback)
File "/usr/local/lib/python2.7/site-packages/django/db/backends/util.py" in execute
  53.                 return self.cursor.execute(sql, params)
File "/usr/local/www/freenasUI/../freenasUI/freeadmin/sqlite3_ha/base.py" in execute
  425.         return Database.Cursor.execute(self, query, params)

Exception Type: DatabaseError at /system/config/restore/
Exception Value: database disk image is malformed
 
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Darren Myers said:
i have the same config you do, but im using 10.1.10.x range....are you all the way up to date with FreeNAS 9.3? have you tried manually updating plex plugin at all? See here to see if its up to date https://forums.freenas.org/index.php?threads/plex-update.35401/#post-214970
Click to expand...
Yes I was running the latest version for FreeNas, however I did not try to manually update plex (I used the update button last time).
Upon running reset to defaults everything stopped working correctly and FreeNas was throwing errors left and right.
I'm currently in the process of reinstalling FreeNas while keeping the current disks.
 
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
ah...that sucks man, hopefully the reinstall and import of your pool resolves it all
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Darren Myers said:
ah...that sucks man, hopefully the reinstall and import of your pool resolves it all
Click to expand...
yup had it working fine for about 5 months, and well might as well nuke it since I already spent 3 days trying to get Plex's Web Interface to show up.

When you import the pool what does it do with the plugins/jails? do they also get imported?
 
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
R2U2 said:
yup had it working fine for about 5 months, and well might as well nuke it since I already spent 3 days trying to get Plex's Web Interface to show up.

When you import the pool what does it do with the plugins/jails? do they also get imported?
Click to expand...
I do not know the answer for what it does with the plugins and jails....i would think they get imported since theyre a separate dataset...
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Update:
I did a fresh install of FreeNas, and I Imported my disks.
The plugins/jails did not transfer, instead they are stored in jails_2.

I installed the Plex Plugin and still cannot access the Plex Web Interface but I do see the DLNA working.

Here is the Plex Media Server.log - https://www.dropbox.com/s/2mtfd7wneqc5ugm/2015-08-21_15-16-10.txt?dl=0

Also the updated ifconfig, netstat and ps

Code:
root@plexmediaserver_1:/var/db/plexdata/Plex Media Server/Logs # ifconfig -a
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 02:b8:b0:00:0f:0b
        inet 10.0.1.3 netmask 0xffffff00 broadcast 10.0.1.255
        nd6 options=9<PERFORMNUD,IFDISABLED>
        media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
        status: active
root@plexmediaserver_1:/var/db/plexdata/Plex Media Server/Logs # netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags    Refs      Use  Netif Expire
default            10.0.1.1           UGS         0      464 epair0
10.0.1.0/24        link#2             U           0      988 epair0
10.0.1.3           link#2             UHS         0       88    lo0
127.0.0.1          link#1             UH          0     2057    lo0

Internet6:
Destination                       Gateway                       Flags      Netif Expire
::/96                             ::1                           UGRS        lo0
::1                               link#1                        UH          lo0
::ffff:0.0.0.0/96                 ::1                           UGRS        lo0
fe80::/10                         ::1                           UGRS        lo0
fe80::%lo0/64                     link#1                        U           lo0
fe80::1%lo0                       link#1                        UHS         lo0
ff01::%lo0/32                     ::1                           U           lo0
ff02::/16                         ::1                           UGRS        lo0
ff02::%lo0/32                     ::1                           U           lo0
root@plexmediaserver_1:/var/db/plexdata/Plex Media Server/Logs # ps auxww
USER   PID %CPU %MEM    VSZ   RSS TT  STAT STARTED    TIME COMMAND
root 26070  0.0  0.0  12080  1868 ??  SsJ   3:04PM 0:00.00 /usr/sbin/syslogd -s
root 26123  0.0  0.0  14184  1844 ??  SsJ   3:04PM 0:00.00 /usr/sbin/cron -s
root 32298  0.0  0.4 163780 35732 ??  IJ    3:04PM 0:01.81 /usr/pbi/plexmediaserver-amd64/bin/python2.7 /usr/pbi/plexmediaserver-amd64/control.py start 10.0.1.3 12346
plex 38724  0.0  0.8 346540 68300 ??  IsJ   3:05PM 0:01.35 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex_Media_Server (Plex Media Server)
plex 38725  0.0  1.2 458300 99884 ??  SNJ   3:05PM 0:06.93 Plex Plug-in [com.plexapp.system] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/System.bundle (python)
plex 38847  0.0  0.4 292648 37152 ??  SJ    3:05PM 0:00.74 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Plex DLNA Server
plex 38864  0.0  0.5 223164 40520 ??  SJ    3:05PM 0:01.70 Plex Plug-in [com.plexapp.agents.wikipedia] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Wikipedia.bundle (python)
plex 38874  0.0  0.5 235452 45644 ??  SJ    3:05PM 0:02.26 Plex Plug-in [com.plexapp.agents.themoviedb] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/TheMovieDB.bundle (python)
plex 38898  0.0  0.5 223164 40104 ??  SJ    3:05PM 0:01.71 Plex Plug-in [com.plexapp.agents.vevo] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/PlexVevo.bundle (python)
plex 38899  0.0  0.5 223164 43564 ??  SJ    3:05PM 0:02.18 Plex Plug-in [com.plexapp.agents.plexmusic] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/PlexMusic.bundle (python)
plex 38900  0.0  0.6 231484 46388 ??  SJ    3:05PM 0:02.24 Plex Plug-in [com.plexapp.agents.thetvdb] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/TheTVDB.bundle (python)
plex 38913  0.0  0.5 219068 38652 ??  SJ    3:05PM 0:01.52 Plex Plug-in [com.plexapp.agents.plexthememusic] /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.12.8.1362-4601e39 /usr/pbi/plexmediaserver-amd64/share/plexmediaserver/Resources/Plug-ins-4601e39/PlexThemeMusic.bundle (python)
root 44121  0.0  0.0  17568  3112 v0  IJ    3:09PM 0:00.01 tcsh
root 44614  0.0  0.0  12336  2916 v0  I+J   3:12PM 0:00.15 vi Plex Media Server.log
root 47926  0.0  0.0  17568  3136  1  SJ    3:14PM 0:00.01 tcsh
root 48156  0.0  0.0  16296  1852  1  R+J   3:18PM 0:00.00 ps auxww
 
Last edited:
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
From inside the plex jail I can SSH into my other boxes, and on those boxes the plex IP is listed as a Foreign address in netstat connecting via ssh.

So looks like there is something more to it.
Network Summary:
upload_2015-8-21_18-1-22.png


Upon startup on the plex jail
Code:
Aug 21 15:43:44 freenas kernel: epair0a: promiscuous mode enabled
Aug 21 15:43:45 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug 21 15:43:45 freenas kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug 21 15:43:48 freenas dhclient: New IP Address (igb1): 10.0.1.18
Aug 21 15:43:48 freenas dhclient: New Subnet Mask (igb1): 255.255.255.0
Aug 21 15:43:48 freenas dhclient: New Broadcast Address (igb1): 10.0.1.255
Aug 21 15:43:48 freenas dhclient: New Routers (igb1): 10.0.1.1
Aug 21 15:43:48 freenas kernel: igb1: link state changed to UP
Aug 21 15:43:48 freenas kernel: igb1: link state changed to UP
Aug 21 15:44:05 freenas kernel: ifa_del_loopback_route: deletion failed
Aug 21 15:44:05 freenas Freed UMA keg (udp_inpcb) was not empty (160 items).  Lost 16 pages of memory.
Aug 21 15:44:05 freenas Freed UMA keg (udpcb) was not empty (2016 items).  Lost 12 pages of memory.
Aug 21 15:44:05 freenas Freed UMA keg (tcpreass) was not empty (168 items).  Lost 2 pages of memory.
Aug 21 15:44:06 freenas Freed UMA keg (tcptw) was not empty (700 items).  Lost 14 pages of memory.
Aug 21 15:44:06 freenas Freed UMA keg (tcp_inpcb) was not empty (160 items).  Lost 16 pages of memory.
Aug 21 15:44:06 freenas Freed UMA keg (tcpcb) was not empty (76 items).  Lost 19 pages of memory.
Aug 21 15:44:06 freenas hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
Aug 21 15:44:06 freenas hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
Aug 21 15:44:34 freenas kernel: ifa_del_loopback_route: deletion failed
Aug 21 15:44:34 freenas Freed UMA keg (udp_inpcb) was not empty (150 items).  Lost 15 pages of memory.
Aug 21 15:44:34 freenas Freed UMA keg (udpcb) was not empty (2016 items).  Lost 12 pages of memory.
Aug 21 15:44:34 freenas Freed UMA keg (tcptw) was not empty (250 items).  Lost 5 pages of memory.
Aug 21 15:44:34 freenas Freed UMA keg (tcp_inpcb) was not empty (80 items).  Lost 8 pages of memory.
Aug 21 15:44:34 freenas Freed UMA keg (tcpcb) was not empty (32 items).  Lost 8 pages of memory.
Aug 21 15:44:34 freenas Freed UMA keg (ripcb) was not empty (20 items).  Lost 2 pages of memory.
Aug 21 15:44:34 freenas hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
Aug 21 15:44:34 freenas hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
 
Last edited:
Darren Myers

Darren Myers

Guru
Joined
Oct 2, 2014
Messages
925
mhmm idk something is very wrong, from inside the jail can you ping google and all?
 
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
Darren Myers said:
mhmm idk something is very wrong, from inside the jail can you ping google and all?
Click to expand...
yup ping & nslookup on google.com works.
I even see plexmediaserver_1 listed under my networks DHCP Clients using the same IP.
Once again since this might be hidden on one the posts above, this is not running in a VM.

This is very strange, all the plugins were working except for plex before the reinstall and now none of them work(plex & emby web interface).
Code:
root@plexmediaserver_1:/ # ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:b8:b0:00:0f:0b
inet 10.0.1.32 netmask 0xffffff00 broadcast 10.0.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active

root@plexmediaserver_1:/ # sockstat -4l                                      
USER     COMMAND    PID   FD PROTO  LOCAL ADDRESS         FOREIGN ADDRESS    
plex     Plex DLNA  69021 12 udp4   *:1900                *:*                
plex     Plex DLNA  69021 15 tcp4   *:1968                *:*                
plex     Plex DLNA  69021 18 udp4   *:8526                *:*                
plex     Plex DLNA  69021 21 udp4   *:15247               *:*                
plex     Plex DLNA  69021 24 tcp4   *:32469               *:*                
plex     Plex DLNA  69021 27 udp4   *:53872               *:*                
plex     Plex DLNA  69021 30 udp4   *:39600               *:*                
plex     python     69015 9  tcp4   *:20009               *:*                
plex     Plex Media 69014 52 tcp4   *:32400               *:*                
plex     Plex Media 69014 53 tcp4   *:32401               *:*                
plex     Plex Media 69014 64 udp4   *:32414               *:*                
plex     Plex Media 69014 65 udp4   *:32410               *:*                
plex     Plex Media 69014 66 udp4   *:32412               *:*                
plex     Plex Media 69014 67 udp4   *:32413               *:*                
plex     Plex Media 69014 68 udp4   127.0.0.1:22276       *:*                
plex     Plex Media 69014 69 udp4   10.0.1.32:33582       *:*                
plex     Plex Media 69014 70 udp4   127.0.0.1:34490       *:*                
plex     Plex Media 69014 71 udp4   10.0.1.32:60208       *:*                
root     python2.7  62465 3  tcp4   10.0.1.32:12346       *:*                
root     syslogd    62100 7  udp4   *:514                 *:*
 
Last edited:
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
I was taking a look at the TCP ports used by plex and tried to go to http://10.0.1.32:32469/proxy/23b1739a6c33d02bf0ba/48x48.png
And guess what... I actually got something (The plex DLNA icon). But I still cant access the Web Interface http://<ip here>:32400/web
Plex Media Server.log: https://www.dropbox.com/s/4j379b3fnknnbhx/2015-08-21_22-44-10.txt?dl=0

Logs of the request for 48x48.png
Code:
Aug 21, 2015 22:32:59 [0x80f47cc00] DEBUG - Request: [127.0.0.1:42670] GET /photo/:/transcode?format=png&height=48&url=http%3A%2F%2F127%2E0%2E0%2E1%3A32400%2F%3A%2Fresources%2Fdlna-icon-260%2Epng&width=48 (2 live) GZIP
Aug 21, 2015 22:32:59 [0x80f47cc00] DEBUG - Photo transcoder: Request for url [http://127.0.0.1:32400/:/resources/dlna-icon-260.png] (is local: 1 upscaled: 0)
Aug 21, 2015 22:32:59 [0x80f47cc00] DEBUG - Content-Length of /var/db/plexdata/Plex Media Server/Cache/PhotoTranscoder/ab/ab96e8964b94322a84d0f7fd2490bb16259396ac.png is 4682.
Aug 21, 2015 22:32:59 [0x8095e7c00] DEBUG - Completed: [127.0.0.1:42670] GET /photo/:/transcode?format=png&height=48&url=http%3A%2F%2F127%2E0%2E0%2E1%3A32400%2F%3A%2Fresources%2Fdlna-icon-260%2Epng&width=48 (2 live) GZIP 77ms 4682 bytes 200


upload_2015-8-21_22-34-12.png
 
Last edited:
R

R2U2

Dabbler
Joined
Aug 18, 2015
Messages
21
I have confirmed that Plex is only the one with issues, the reason is still unknown. I will also be making a post on the Plex FreeBSD section.
I have checked that the plugin has started in the plugins server stats and by running service plexmediaserver start

Plex - Unable to access Web Interface (http://jailip.local:32400/web/), however DLNA works. https://www.dropbox.com/s/pk4yw1f683pxot4/2015-08-22_00-50-16.txt?dl=0 (PlexMediaServer-0.9.12.8.1362-4601e39)
Emby - Web Interface works! (http://jailip.local:8096), DLNA is not configured so it will not show up. (I forgot to start the plugin the first time. I am now following a check sheet to make sure this does not happen again)
Sickrage - Web Interface works! (http://jailip.local:8081)

Running wget from plexmediaserver_1 on 127.0.0.1:32400/web proved that the web interface is working, Also I get the same result from any other computer (using 10.0.1.32 instead of 127.0.0.1.)
Code:
root@plexmediaserver_1:/ # wget 127.0.0.1:32400/web
--2015-08-22 03:28:37--  http://127.0.0.1:32400/web
Connecting to 127.0.0.1:32400... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://127.0.0.1:32400/web/index.html [following]
--2015-08-22 03:28:37--  http://127.0.0.1:32400/web/index.html
Reusing existing connection to 127.0.0.1:32400.
HTTP request sent, awaiting response... 200 OK
Length: 2502 (2.4K) [text/html]
Saving to: 'web'

web                                        100%[==========================================================================================>]   2.44K  --.-KB/s   in 0.1s

2015-08-22 03:28:37 (24.8 KB/s) - 'web' saved [2502/2502]

root@plexmediaserver_1:/ # vi web
<!DOCTYPE html>
<!--
   =======   ==
  /==////== /==
  /==   /== /==   =====   ==   ==
  /=======  /==  ==///== //== ==
  /==////   /== /=======  //===
  /==       /== /==////    ==/==
  /==       /== //======  == //==
  //        //   /////   //   //

  Credits
   * Glyphicons - http://glyphicons.com
-->
<html lang="en" data-cast-api-enabled="true">
 
Last edited:
Status
Not open for further replies.

Important Announcement for the TrueNAS Community.

The TrueNAS Community has now been moved. This forum will now become READ-ONLY for historical purposes. Please feel free to join us on the new TrueNAS Community Forums.

Related topics on forums.truenas.com for thread: "Unable to access Plex Web Interface - Check your firewall!"

Similar threads

T
TrueNAS 12.0 U8 - Trying to Install Plex Manually & Having Network Issues
Replies
16
Views
4K
faktorqm
F
R
  • Locked
SNMP not working
Replies
3
Views
5K
joeschmuck
joeschmuck
A
  • Locked
Unable to open port 3478 for STUN
Replies
5
Views
9K
m0nkey_
m0nkey_
C
Plexmediaserver service running, but not?
Replies
4
Views
5K
sretalla
sretalla
H
  • Locked
Can't manage individual Plugins in GUI because of Bad Gateway
Replies
0
Views
2K
hervon
H
Top