smountcastle
Cadet
- Joined
- Jul 13, 2014
- Messages
- 1
While I was on vacation for a couple of weeks, I had two drives die and lost power (no UPS). I replaced the failed drives and they started reslivering but appear to have gotten stuck. I left it alone for a few days but since the reslivering wasn't making progress I restarted the server. Now it kernel panics on start up (when mounting the local file systems). Since I was using FreeNAS 8.3.0-RELEASE from a bootable USB drive and there's a newer version available, I downloaded FreeNAS 9.2.1.6 and created a bootable USB stick, imported the ZFS pool and was able to recover some of my data. Unfortunately, the one directory I didn't want to lose is inaccessible, here's the error message I get:
# ls /mnt/Main/Media/Pictures
ls: /mnt/Main/Media/Pictures: Unknown error: 122
If I boot back up with the FreeNAS 8.3.0-RELEASE, I can get in via single user mode but it reports:
# zpool import
pool: Main
id: 18408935635800139552
state: DEGRADED
status: One or more devices were being resilvered.
action: The pool can be imported despite missing or damaged devices. The
fault tolerance of the pool may be compromised if imported.
config:
Main DEGRADED
raidz2-0 DEGRADED
replacing-0 DEGRADED
10982563356720550592 UNAVAIL cannot open
gptid/443b705f-0898-11e4-ba10-902b3435a0a0 ONLINE
replacing-1 DEGRADED
13680123313221299576 UNAVAIL cannot open
gptid/3a0b78b8-089a-11e4-ba10-902b3435a0a0 ONLINE
gptid/1f3d520c-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/1fb0b2c6-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/2029cb29-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/209f6321-3bf0-11e2-ae06-902b3435a0a0 ONLINE
Based on that note in the action, I'm afraid to re-import it.
For some background, I setup my RAIDZ-2 all through the Web GUI (following these instructions: http://stevestreza.com/2012/09/30/freenas-build/). When I replaced the failed drives, I used the Web GUI to detach the bad drives and then, after installing the replacements, used the GUI to complete the replacement and initiate reslivering.
Any suggestions for accessing that directory and it's contents would be appreciated, there are some family photos in there that I don't have back ups for (my fault).
Thanks for taking the time to read this and provide assistance,
Sean
# ls /mnt/Main/Media/Pictures
ls: /mnt/Main/Media/Pictures: Unknown error: 122
If I boot back up with the FreeNAS 8.3.0-RELEASE, I can get in via single user mode but it reports:
# zpool import
pool: Main
id: 18408935635800139552
state: DEGRADED
status: One or more devices were being resilvered.
action: The pool can be imported despite missing or damaged devices. The
fault tolerance of the pool may be compromised if imported.
config:
Main DEGRADED
raidz2-0 DEGRADED
replacing-0 DEGRADED
10982563356720550592 UNAVAIL cannot open
gptid/443b705f-0898-11e4-ba10-902b3435a0a0 ONLINE
replacing-1 DEGRADED
13680123313221299576 UNAVAIL cannot open
gptid/3a0b78b8-089a-11e4-ba10-902b3435a0a0 ONLINE
gptid/1f3d520c-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/1fb0b2c6-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/2029cb29-3bf0-11e2-ae06-902b3435a0a0 ONLINE
gptid/209f6321-3bf0-11e2-ae06-902b3435a0a0 ONLINE
Based on that note in the action, I'm afraid to re-import it.
For some background, I setup my RAIDZ-2 all through the Web GUI (following these instructions: http://stevestreza.com/2012/09/30/freenas-build/). When I replaced the failed drives, I used the Web GUI to detach the bad drives and then, after installing the replacements, used the GUI to complete the replacement and initiate reslivering.
Any suggestions for accessing that directory and it's contents would be appreciated, there are some family photos in there that I don't have back ups for (my fault).
Thanks for taking the time to read this and provide assistance,
Sean