Hello!
So recently i started using freenas i only had one HDD so i installed TrueNAS on there and it booted everytime but when i added my 5 HDD it didnt want to boot and the only thing that the video output of the machine gives is:
And now its stuck there and not booting.
The HDD are attached via 3 Sata ports on mb and 3 Sata ports on a Pci-e to Sata controller.
My system details:
AMD A10-6700
Samsung 16GB DDR3 1666mhz
6 HDD-s, Boot device 256gb, Others 500gb, Raidz1
QNINE PCIe SATA Card 4 Port Marvell 88SE9215 chip
So recently i started using freenas i only had one HDD so i installed TrueNAS on there and it booted everytime but when i added my 5 HDD it didnt want to boot and the only thing that the video output of the machine gives is:
Code:
>> FreeBSD EFI boot block Loader path: /boot/loader.efi Initializing module: ZFS UFS Load path: \EFI\BOOT\BOOTX64.EFI Load Device: PciRoot(0x0)/Pci(0x11, 0x0)/HD(1,GPT,034cc83f-9895-11eb-8693-448a5bbef9dc,0x28,0x82000) BootCurrent: 000e BootOrder: 000e[*] 000f 0010 0011 0012 0013 00a 0005 0004 Probing 18 block devices...not supported not supported not supported not supported better not supported good not supported good not supported not supported not supported
And now its stuck there and not booting.
The HDD are attached via 3 Sata ports on mb and 3 Sata ports on a Pci-e to Sata controller.
My system details:
AMD A10-6700
Samsung 16GB DDR3 1666mhz
6 HDD-s, Boot device 256gb, Others 500gb, Raidz1
QNINE PCIe SATA Card 4 Port Marvell 88SE9215 chip