I have two mirrored drives with a spare for 3 x 3TB drives.
All drives are hot swapable.
When I pull ada4p2 for example the status of the pool stays the same with no degregation. When I pull drive from the first pair the same result no degregation.
Is this correct behavior?
Current status:
Pulled ada4p2:
I will pull ada1p2 now:
All drives are hot swapable.
When I pull ada4p2 for example the status of the pool stays the same with no degregation. When I pull drive from the first pair the same result no degregation.
Is this correct behavior?
Current status:
Code:
[root@freenas-2] ~# zpool status pool: tank1 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank1 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 ada1p2 ONLINE 0 0 0 spares ada2p2 AVAIL errors: No known data errors pool: tank2 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank2 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 ada4p2 ONLINE 0 0 0 spares ada5p2 AVAIL errors: No known data errors
Pulled ada4p2:
Code:
[root@freenas-2] ~# zpool status pool: tank1 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank1 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 ada1p2 ONLINE 0 0 0 spares ada2p2 AVAIL errors: No known data errors pool: tank2 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank2 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 ada4p2 ONLINE 0 0 0 spares ada5p2 AVAIL errors: No known data errors
I will pull ada1p2 now:
Code:
[root@freenas-2] ~# zpool status pool: tank1 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank1 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada0p2 ONLINE 0 0 0 ada1p2 ONLINE 0 0 0 spares ada2p2 AVAIL errors: No known data errors pool: tank2 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tank2 ONLINE 0 0 0 mirror ONLINE 0 0 0 ada3p2 ONLINE 0 0 0 ada4p2 ONLINE 0 0 0 spares ada5p2 AVAIL errors: No known data errors