Right, I think I know what the problem was, and I am working my way towards fixing it. I had created 2 datasets, 1 for the jail, another for the plugins. BUT I had placed the plugin one *within* the jail dataset, which I believe was my error.
I deleted the attempted jail and the datasets and rebuilt them, this time with two separate datasets, not nested. I went through the process for creating the jail and first impressions are positive. The command
jls
Now reveals a jail there, whereas before I saw no number under the JID field.
As per ProtoSD's request, I see this:
Code:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
epair0b: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:65:a9:00:05:0b
inet 192.168.1.150 netmask 0xffffff00 broadcast 192.168.1.255
inet6 fe80::65:a9ff:fe00:50b%epair0b prefixlen 64 scopeid 0x2
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
As for Paleon's request, this is all I can copy from the root ifconfig:
Code:
inet 192.168.1.69 netmask 0xffffff00 broadcast 192.168.1.255
media: Ethernet autoselect (1000baseT <full-duplex,flowcontrol,rxpause,t
xpause>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=3<RXCSUM,TXCSUM>
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet6 ::1 prefixlen 128
inet 127.0.0.1 netmask 0xff000000
nd6 options=3<PERFORMNUD,ACCEPT_RTADV>
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 1e:dc:7e:79:4f:a1
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 2000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu
1500
ether 02:65:a9:00:04:0a
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
The rest scrolled off the top of the screen. The netstat -rn returned:
Code:
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
0.0.0.0/8 link#4 U 0 0 epair0
127.0.0.1 link#2 UH 0 69414 lo0
192.168.1.0/24 link#1 U 0 219608 bge0
192.168.1.69 link#1 UHS 0 298 lo0
Internet6:
Destination Gateway Flags Netif
Expire
::1 ::1 UH lo0
fe80::%lo0/64 link#2 U lo0
fe80::1%lo0 link#2 UHS lo0
ff01:2::/32 fe80::1%lo0 U lo0
ff02::%lo0/32 fe80::1%lo0 U lo0
I am now going to setup a mount point and see if I can get Transmission up and running. Getting closer!