Register for the iXsystems Community to get an ad-free experience and exclusive discounts in our eBay Store.

Strange state after disk replacement

Uberjawa

Newbie
Joined
May 27, 2021
Messages
2
Truenas folks, I'm not sure what to make of this and I could use some guidance. I have a raidz2 that had a failed disk. My hot spare kicked in and resilvering began. I replaced the failed disk with no issues and resilvering completed. I log in and take a look at the pool status and can't really make sense of what I'm seeing. See below.


1622156858422.png




Code:
root@freenas:~ # zpool status -v
  pool: freenas-boot
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
    still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
    the pool may no longer be accessible by software that does not support
    the features. See zpool-features(5) for details.
  scan: scrub repaired 0B in 00:01:11 with 0 errors on Fri May 21 03:46:12 2021
config:

    NAME          STATE     READ WRITE CKSUM
    freenas-boot  ONLINE       0     0     0
      mirror-0    ONLINE       0     0     0
        ada0p2    ONLINE       0     0     0
        ada1p2    ONLINE       0     0     0

errors: No known data errors

  pool: pool0
 state: ONLINE
  scan: scrub in progress since Thu May 27 14:31:29 2021
    3.27T scanned at 2.86G/s, 955G issued at 837M/s, 18.0T total
    0B repaired, 5.20% done, 05:55:21 to go
config:

    NAME                                                  STATE     READ WRITE CKSUM
    pool0                                                 ONLINE       0     0     0
      raidz2-0                                            ONLINE       0     0     0
        gptid/9d2fe034-d7d5-11e8-b5b8-0cc47a47a76d.eli    ONLINE       0     0     0
        gptid/9deebcb4-d7d5-11e8-b5b8-0cc47a47a76d.eli    ONLINE       0     0     0
        gptid/9e9de815-d7d5-11e8-b5b8-0cc47a47a76d.eli    ONLINE       0     0     0
        spare-3                                           ONLINE       0     0     0
          gptid/da3e1072-be81-11eb-a9a5-0cc47a47a76d.eli  ONLINE       0     0     0
          gptid/e4d7e292-d7d5-11e8-b5b8-0cc47a47a76d.eli  ONLINE       0     0     0
        gptid/9ffa7605-d7d5-11e8-b5b8-0cc47a47a76d.eli    ONLINE       0     0     0
        gptid/a0ad73cc-d7d5-11e8-b5b8-0cc47a47a76d.eli    ONLINE       0     0     0
        gptid/7e72c3a6-0f29-11eb-acc9-0cc47a47a76d.eli    ONLINE       0     0     0
    spares
      gptid/e4d7e292-d7d5-11e8-b5b8-0cc47a47a76d.eli      INUSE     currently in use

errors: No known data errors




I want to get back to 1 single hot spare, any ideas?
 

sretalla

Wizened Sage
Joined
Jan 1, 2016
Messages
6,302
Top