NYSundevil
Dabbler
- Joined
- Nov 22, 2020
- Messages
- 13
New to TrueNAS, ran CORE for about 9 months, moved to SCALE upon release of BETA because FreeBSD didn't support transcoding on 10th gen Intel. No major issues with SCALE, until I logged in yesterday and notice my main pool (Fusion Pool) was flagged degraded. Knew one of my 3.5 drives had some bent pins, shut everything down this morning and removed it for an RMA. Server hasn't fully booted since. Originally I would get the "Make sure the TureNAS system is powered on and connected to the network, now it fails to get that far.
I have a monitor and keyboard connected so I can watch the boot process loop. I currently only have single SSD SCALE Boot drive but do have additional CORE boot drives installed. I know I need to clean that mess up, I can't go back to CORE because I updated ZFS.
Watching the Shutdown and Boot cycle it was taking longer than usual to complete either over 20 minutes, no issues starting or stopping middleware.
Currently in the boot shutdown cycle I see a few errors
Failed mounting or unmounting/var/db/system.
Failed mounting or unmounting/var/lib/systemd/coredump.
There are other very similar related failures both shutting down starting up
The main issue I see during boot is it continues to cycle with
[OK] Stopped Getty on tty1
[OK] Started Getty on tty1
[OK] Stopped Serial Getty on ttyS0
[OK] Started Serial Getty on ttyS0
It does it a few times then tries to start some other processes before repeating Getty cycle. Eventually it hangs with screens flashing with text that too fast to read any of the text but not fully booting.
I can interrupt this from keyboard with Ctrl-Alt-Delete. When I boot I can choose which version of SCALE to run or advance options. From the advance option I can get to the Console menu with choice 1-11 but never gives me the IP for GUI. The IP is static assigned via my router.
This is my first post, I don't do anything complicated, the box is basically overkill for Plex and family file server. I was backing up the data to my old QNAP box but haven't resetup since moving to SCALE. Don't mind losing my setting but would rather not lose the last 4 months of data changes if I can avoid it.
Any help is greatly appreciated, please let me know if additional information is needed.
Neil
I have a monitor and keyboard connected so I can watch the boot process loop. I currently only have single SSD SCALE Boot drive but do have additional CORE boot drives installed. I know I need to clean that mess up, I can't go back to CORE because I updated ZFS.
Watching the Shutdown and Boot cycle it was taking longer than usual to complete either over 20 minutes, no issues starting or stopping middleware.
Currently in the boot shutdown cycle I see a few errors
Failed mounting or unmounting/var/db/system.
Failed mounting or unmounting/var/lib/systemd/coredump.
There are other very similar related failures both shutting down starting up
The main issue I see during boot is it continues to cycle with
[OK] Stopped Getty on tty1
[OK] Started Getty on tty1
[OK] Stopped Serial Getty on ttyS0
[OK] Started Serial Getty on ttyS0
It does it a few times then tries to start some other processes before repeating Getty cycle. Eventually it hangs with screens flashing with text that too fast to read any of the text but not fully booting.
I can interrupt this from keyboard with Ctrl-Alt-Delete. When I boot I can choose which version of SCALE to run or advance options. From the advance option I can get to the Console menu with choice 1-11 but never gives me the IP for GUI. The IP is static assigned via my router.
This is my first post, I don't do anything complicated, the box is basically overkill for Plex and family file server. I was backing up the data to my old QNAP box but haven't resetup since moving to SCALE. Don't mind losing my setting but would rather not lose the last 4 months of data changes if I can avoid it.
Any help is greatly appreciated, please let me know if additional information is needed.
Neil