I had a drive in a zfs pool that was giving me a crap load of write errors, and ahchi errors, enough that it was causing FreeNAS to lock up. So I stuck a new drive in, and hit replaced. It took forever, and crashed several times. This is the output I get now:
But it wont let me delete the old drive in the pool on the GUI, like I did last time I replaced a drive. Thoughts?
Code:
[root@freenas] ~# zpool status pool: Storage state: ONLINE status: One or more devices has experienced an error resulting in data corruption. Applications may be affected. action: Restore the file in question if possible. Otherwise restore the entire pool from backup. see: http://www.sun.com/msg/ZFS-8000-8A scan: resilvered 186G in 241h35m with 348669 errors on Wed Nov 7 14:39:23 2012 config: NAME STATE READ WRITE CKSUM Storage ONLINE 0 0 0 replacing-0 ONLINE 0 0 0 gptid/6d3fa90d-1b23-11e2-b307-00241d29191e ONLINE 0 0 4 gptid/9254b0ca-2141-11e2-b3d2-00241d29191e ONLINE 0 0 0 gptid/71b35dc9-1b23-11e2-b307-00241d29191e ONLINE 0 0 0 gptid/59fa73fd-1bb5-11e2-a43a-00241d29191e ONLINE 0 0 0 errors: 348669 data errors, use '-v' for a list [root@freenas] ~#
But it wont let me delete the old drive in the pool on the GUI, like I did last time I replaced a drive. Thoughts?