abuck
Cadet
- Joined
- Sep 4, 2012
- Messages
- 4
Hey guys,
I'm running freenas 8.3.0 P4, I have 7 2TB HDD in a zraidz-2 configuration and I wanted to add a log device to the pool. However, something went bad on the GUI side and ended up with a single drive instead. (a 120GB SSD drive). How can I remove this drive, it doesn't seem to be able to remove a vdev from the pool, what are my options ? I don't have enough drives to back-up my 10TB pool and re-create it....
[jon@freenas] /# zpool status volRaidz
pool: volRaidz
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: none requested
config:
-
- NAME STATE READ WRITE CKSUM
- volRaidz DEGRADED 0 0 239
--- raidz1-0 DEGRADED 0 0 956
----- gptid/7e869002-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7f55461d-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7f746c41-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- 2639875857108495737 UNAVAIL 0 0 0 was /dev/gptid/7f84b7e8-3c9d-11e2-8d67-001517a8efa2
----- gptid/7f99bb65-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7fb45668-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7fc50c3a-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
--- gptid/b1a5e58b-cbb1-11e2-9cf0-001517a8efa2 ONLINE 0 0 0 <----------------- THIS IS MY SSD DRIVE
The degraded stuff is there because I had a fail drive on friday...need to replace it soon.
thanks,
I'm running freenas 8.3.0 P4, I have 7 2TB HDD in a zraidz-2 configuration and I wanted to add a log device to the pool. However, something went bad on the GUI side and ended up with a single drive instead. (a 120GB SSD drive). How can I remove this drive, it doesn't seem to be able to remove a vdev from the pool, what are my options ? I don't have enough drives to back-up my 10TB pool and re-create it....
[jon@freenas] /# zpool status volRaidz
pool: volRaidz
state: DEGRADED
status: One or more devices has experienced an error resulting in data
corruption. Applications may be affected.
action: Restore the file in question if possible. Otherwise restore the
entire pool from backup.
see: http://www.sun.com/msg/ZFS-8000-8A
scan: none requested
config:
-
- NAME STATE READ WRITE CKSUM
- volRaidz DEGRADED 0 0 239
--- raidz1-0 DEGRADED 0 0 956
----- gptid/7e869002-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7f55461d-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7f746c41-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- 2639875857108495737 UNAVAIL 0 0 0 was /dev/gptid/7f84b7e8-3c9d-11e2-8d67-001517a8efa2
----- gptid/7f99bb65-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7fb45668-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
----- gptid/7fc50c3a-3c9d-11e2-8d67-001517a8efa2 ONLINE 0 0 0
--- gptid/b1a5e58b-cbb1-11e2-9cf0-001517a8efa2 ONLINE 0 0 0 <----------------- THIS IS MY SSD DRIVE
The degraded stuff is there because I had a fail drive on friday...need to replace it soon.
thanks,