Code:
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root@NAS:~ # dmesg
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-RELEASE-p14 #0 r325575+c936002dbe2(HEAD): Mon Sep 28 10:48:27 EDT 2020
root@tnbuilds05.tn.ixsystems.net:/freenas-releng/freenas/_BE/objs/freenas-releng/freenas/_BE/os/sys/FreeNAS.amd64-DEBUG amd64
FreeBSD clang version 8.0.0 (tags/RELEASE_800/final 356365) (based on LLVM 8.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): text 80x25
CPU: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (3696.17-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 17179869184 (16384 MB)
avail memory = 16225947648 (15474 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1848083801 Hz quality 1000
random: entropy device external interface
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
mlx5en: Mellanox Ethernet driver 3.5.1 (April 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
padlock0: No ACE support.
acpi0: <ALASKA A M I > on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
Event timer "HPET1" frequency 24000000 Hz quality 440
Event timer "HPET2" frequency 24000000 Hz quality 440
Event timer "HPET3" frequency 24000000 Hz quality 440
Event timer "HPET4" frequency 24000000 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf130000-0xdf13ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0: waiting for BIOS to give up control
xhci_interrupt: host controller halted
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf148000-0xdf149fff,0xdf14c000-0xdf14c0ff,0xdf14b000-0xdf14b7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 29.2 on pci0
pci3: <ACPI PCI bus> on pcib3
ahci1: <Marvell 88SE9215 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xdf040000-0xdf0407ff irq 18 at device 0.0 on pci3
ahci1: AHCI v1.00 with 4 6Gbps ports, Port Multiplier supported with FBS
ahcich6: <AHCI channel> at channel 0 on ahci1
ahcich7: <AHCI channel> at channel 1 on ahci1
ahcich8: <AHCI channel> at channel 2 on ahci1
ahcich9: <AHCI channel> at channel 3 on ahci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
pci0: <multimedia, HDA> at device 31.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdf100000-0xdf11ffff irq 16 at device 31.6 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: d0:50:99:9b:74:b3
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
wbwd0: <Nuvoton NCT6793 (0xd1/0x21) Watchdog Timer> at port 0x2e-0x2f on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd2fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ACPI Warning: \134_PR.CPU0._PSS: Found unexpected NULL package element (20171214/nsrepair-335)
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
freenas_sysctl: adding account.
freenas_sysctl: adding directoryservice.
freenas_sysctl: adding middlewared.
freenas_sysctl: adding network.
freenas_sysctl: adding services.
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
pmp0 at ahcich9 bus 0 scbus10 target 15 lun 0
pmp0: <Port Multiplier 10921b21 0008> ATA device
pmp0: 600.000MB/s transfers (SATA 3.x, NONE, PIO 8192bytes)
pmp0: 3 fan-out ports
uhub0: 22 ports with 22 removable, self powered
ugen0.2: <MOSART Semi. HP Wireless Keyboard and Mouse> at usbus0
ukbd0 on uhub0
ukbd0: <MOSART Semi. HP Wireless Keyboard and Mouse, class 0/0, rev 1.10/1.13, addr 1> on usbus0
kbd2 at ukbd0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <CT240BX500SSD1 M6CR022> ACS-3 ATA SATA 3.x device
ada0: Serial Number 2028E4069DE3
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 228936MB (468862128 512 byte sectors)
ada1 at ahcich2 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD20EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada1: Serial Number WD-WCC4M5CJ4HKX
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors)
ada1: quirks=0x1<4K>
ada2 at ahcich3 bus 0 scbus3 target 0 lun 0
ada2: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
ada2: Serial Number WD-WCC7K0KF25LS
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ada2: quirks=0x1<4K>
ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD40EFRX-68N32N0 82.00A82> ACS-3 ATA SATA 3.x device
ada3: Serial Number WD-WCC7K6AKJ44N
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 3815447MB (7814037168 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
ada4: <WDC WD30EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada4: Serial Number WD-WCC4N3ZX58P2
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 2861588MB (5860533168 512 byte sectors)
ada4: quirks=0x1<4K>
ada5 at ahcich9 bus 0 scbus10 target 0 lun 0
ada5: <WDC WD20EFRX-68EUZN0 82.00A82> ACS-2 ATA SATA 3.x device
ada5: Serial Number WD-WCC4M3VPADCX
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 1907729MB (3907029168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich9 bus 0 scbus10 target 1 lun 0
ada6: <WDC WD20EFAX-68FB5N0 82.00A82> ACS-3 ATA SATA 3.x device
ada6: Serial Number WD-WX72A30FJJE1
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 1907729MB (3907029168 512 byte sectors)
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses0: ada0,pass0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: ada1,pass1 in 'Slot 02', SATA Slot: scbus2 target 0
ses0: ada2,pass2 in 'Slot 03', SATA Slot: scbus3 target 0
ses0: ada3,pass3 in 'Slot 04', SATA Slot: scbus4 target 0
ses0: ada4,pass4 in 'Slot 05', SATA Slot: scbus5 target 0
random: unblocking device.
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:freenas-boot/ROOT/default []...
warning: KLD '/boot/kernel-debug/ums.ko' is newer than the linker.hints file
ums0 on uhub0
ums0: <MOSART Semi. HP Wireless Keyboard and Mouse, class 0/0, rev 1.10/1.13, addr 1> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=3
lo0: link state changed to UP
em0: link state changed to UP
warning: KLD '/boot/kernel-debug/vmm.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/sdt.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/systrace.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/systrace_freebsd32.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/profile.ko' is newer than the linker.hints file
lock order reversal:
1st 0xfffff801d4dac240 tmpfs (tmpfs) @ /freenas-releng/freenas/_BE/os/sys/kern/vfs_mount.c:908
2nd 0xfffff801d79249a0 zfs (zfs) @ /freenas-releng/freenas/_BE/os/sys/kern/vfs_mount.c:919
stack backtrace:
#0 0xffffffff80b6eee0 at witness_debugger+0x70
#1 0xffffffff80b6ed76 at witness_checkorder+0xe76
#2 0xffffffff80adf5d1 at lockmgr_lock_fast_path+0x1b1
#3 0xffffffff811eb9c1 at VOP_LOCK1_APV+0xe1
#4 0xffffffff80be8fd7 at _vn_lock+0x67
#5 0xffffffff80bcff4d at vfs_domount+0xd1d
#6 0xffffffff80bcec89 at vfs_donmount+0x7b9
#7 0xffffffff80bce4a1 at sys_nmount+0x71
#8 0xffffffff8101a712 at amd64_syscall+0x792
#9 0xffffffff80ff487d at fast_syscall_common+0x101
GEOM_ELI: Device ada1p1.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: hardware
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI>
warning: KLD '/boot/kernel-debug/t3_tom.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/toecore.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel-debug/t4_tom.ko' is newer than the linker.hints file
em0: link state changed to DOWN
em0: link state changed to UP
CPU: Intel(R) Core(TM) i3-6100 CPU @ 3.70GHz (3696.17-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x121<LAHF,ABM,Prefetch>
J'ai vérifié les câbles etc, tout a l'air correct...