In a bit of a panic mode, did a quick search but couldn't find anything.
My pool (6x8TB Z2) suddenly crashed. I received an email alert saying that a snapshot failed followed by an email saying the pool state is UNVAVAIL: one or more devices are faulted in response to IO failures.
**EDIT** I was running a scrub when this happened.
Rebooted, same thing. Actually had to hard reboot because it said "90 second watchdog timeout expired. Shutdown terminated.
On the web dashboard, my (encrypted) pool is only showing 3/6 disks. If I go to storage > disks I can see them all though. Attempting to unlock the pool results in "error unlocking" dialog.
Dashboard reports the following:
OS Version:
FreeNAS-11.2-U3
(Build Date: Mar 27, 2019 18:24)
Processor:
Intel(R) Xeon(R) CPU E5-2650L 0 @ 1.80GHz (16 cores)
Memory:
24 GiB
HostName:
freenas.local
The Memory graph is saying that only 1.54GiB are being used though. Saw another post saying that ECC RAM going bad can cause this?
Will provide more data as needed.
Steps I have taken so far were to put the 3 "missing" disks into other trays in case the backplanes had gone bad. This didn't help so I put them back to where they were.
Any help is greatly appreciated. And no, unfortunately I do not yet have a backup system in place as I have just recently put this system together and it contains some irreplaceable data.
Thanks.
My pool (6x8TB Z2) suddenly crashed. I received an email alert saying that a snapshot failed followed by an email saying the pool state is UNVAVAIL: one or more devices are faulted in response to IO failures.
**EDIT** I was running a scrub when this happened.
Rebooted, same thing. Actually had to hard reboot because it said "90 second watchdog timeout expired. Shutdown terminated.
On the web dashboard, my (encrypted) pool is only showing 3/6 disks. If I go to storage > disks I can see them all though. Attempting to unlock the pool results in "error unlocking" dialog.
Dashboard reports the following:
OS Version:
FreeNAS-11.2-U3
(Build Date: Mar 27, 2019 18:24)
Processor:
Intel(R) Xeon(R) CPU E5-2650L 0 @ 1.80GHz (16 cores)
Memory:
24 GiB
HostName:
freenas.local
The Memory graph is saying that only 1.54GiB are being used though. Saw another post saying that ECC RAM going bad can cause this?
Will provide more data as needed.
Steps I have taken so far were to put the 3 "missing" disks into other trays in case the backplanes had gone bad. This didn't help so I put them back to where they were.
Any help is greatly appreciated. And no, unfortunately I do not yet have a backup system in place as I have just recently put this system together and it contains some irreplaceable data.
Thanks.