Pogoplug Cloudstor wx freenas settings - Confused!

[Kh_robert]

Tring to figure out how to use pogoplugs severs to aggregate with freenas
Help Please

 

[ProtoSD]

I would take a look at this link below if you haven't already. You really didn't provide any information about what you've tried or are trying to do. The standard Pogoplug is meant to share media from a USB disk, in a somewhat less sophisticated way than FreeNAS. The link below discusses a hack to allow it to mount NFS shares which would then allow you to share media from FreeNAS. I don't own or have ever used one of these.

http://openpogo.tumblr.com/

 

[Kh_robert]

ipconfig with virtual adapters

have 2 virtual nic adapter:

1: nat,em0,dhcp,promisc
2: bridged,lagg0,tso{promisc polling arp}

try to create wan optimization (i.e. cs-wx2.0/1d virtual server with original or merged firmware always on ssl connection with user authentication)
Looking for a good forum or development help. THANKS IN ADVANCE

 

[Kh_robert]

sry for the edits or junk email good device has freenas built into the hardware =")

NO WAN ACCELERATION ON PERSONAL LAN

Form Factor: 2-Bay
Port RJ-45: 1 x 10/100/1000M
Port USB: 1 x USB2.0
HDD Interface: 2 x SATA
Supported Protocols: TCP/IP, HTTP/HTTPS, NTP
Operating System: Windows 7 (32-bit/64-bit) / Vista (32-bit/64-bit) / XP / 2000, Windows 2000/2003/2008 Server, Mac OS 10.3.9 or higher
RAID: 1, JBOD
Power: External AC 100-240V 50/60 Hz

 

[Kh_robert]

Domain

I am trying to create a domain that will allow internet traffic to flow to and from my local and wide area network after accelerating the wan on my router for the domain, hosts and the nas.

HELP PLEASE HELP PLEASE HELP PLEASE HELP PLEASE