Plugin wont restart after reboot

[jokerdud]

So long story short, I had a running freenas 11.1 U5 with Plex and Resillio for a few months. I've decided to start playing with syncthing 2 days ago and that's where all the shit started happening.

After reading, trying a bunch of things... I decided to delete all jails, users (except my smd share one) and reloaded my 2 days ago config file. Reinstalled Plex and Resillio, did my jail permissions, storage mnt... Everything was getting back to normal and then I decided to reboot the machine, just to make sure and now only Plex works, Resillio wont start. I doubled check to make sure both IPs and MAC were different, resillio is is 817...

Any idea where should I look next?

 

[kdragon75]

Please start with whats not working. Are you getting error messages? Also don't forget your hardware details as required per forum rules.

 

[jokerdud]

Sorry for that

Mobo: GA-Z68A-D3H-B3
CPU: i5-2320 3GHz
RAM: 8GB DDR3
HDD: 5x 2TB BLACK in SATA

I don't have any error from the GUI, but when I turn the plugin on, it doesn't go on. If I tail the logs, nothing happens when I press the plugin button to turn it on.

 

[dlavigne]

Did the IP address change on reboot? What is the contents of ifconfig?

 

[jokerdud]

Did the IP address change on reboot? What is the contents of ifconfig?

IP is still the same for freenas and in both jails.

re0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=82099<RXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC,LINKSTATE>
ether 50:e5:49:b9:30:e8
hwaddr 50:e5:49:b9:30:e8
inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255
nd6 options=9<PERFORMNUD,IFDISABLED>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 02:3f:48:49:d5:00
nd6 options=1<PERFORMNUD>
groups: bridge
id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15
maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200
root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0
member: epair1a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 5 priority 128 path cost 2000
member: epair0a flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 4 priority 128 path cost 2000
member: re0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP>
ifmaxaddr 0 port 1 priority 128 path cost 20000
epair0a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:8a:50:00:04:0a
hwaddr 02:8a:50:00:04:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair
epair1a: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8<VLAN_MTU>
ether 02:8a:50:00:05:0a
hwaddr 02:8a:50:00:05:0a
nd6 options=1<PERFORMNUD>
media: Ethernet 10Gbase-T (10Gbase-T <full-duplex>)
status: active
groups: epair

 

[jokerdud]

Please start with whats not working. Are you getting error messages? Also don't forget your hardware details as required per forum rules.

Any idea from what I posted?

 

[dlavigne]

Were you able to resolve this?