There are no Quotas Set:
Hardware:
Supermicro XD8FDE Motherboard
2x Xeon (2.66Ghz) Quad Core
48GiB Ram (DDR 1333)
LSI 8260-8i (lying around)
Raid - 6 (MFID0) 8TB array (Yes I know Hardware raid is evil / Bad / Wrong...)
3U 933 PT Chassis
2 SSD's Vertex 4's (L2ARC / Zlog)
# dmesg
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p31 #0 r288272+81e2595: Mon Jan 18 10:48:44 PST 2016
root@build3.ixsystems.com:/tank/home/stable-builds/FN/objs/os-base/amd64/tank/home/stable-builds/FN/FreeBSD/src/sys/FREENAS.amd64 amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz (2533.48-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x106a5 Family = 0x6 Model = 0x1a Stepping = 5
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x9ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 52613349376 (50176 MB)
avail memory = 49784586240 (47478 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <051512 APIC1217>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 SMT threads
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
cpu8 (AP): APIC ID: 16
cpu9 (AP): APIC ID: 17
cpu10 (AP): APIC ID: 18
cpu11 (AP): APIC ID: 19
cpu12 (AP): APIC ID: 20
cpu13 (AP): APIC ID: 21
cpu14 (AP): APIC ID: 22
cpu15 (AP): APIC ID: 23
WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
padlock0: No ACE support.
acpi0: <NEC > on motherboard
acpi0: Overriding SCI from IRQ 9 to IRQ 20
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, bff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x97, should be 0x94 (20111123/tbutils-290)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci12: <ACPI PCI bus> on pcib1
mfi0: <LSI MegaSAS Gen2> port 0xe000-0xe0ff mem 0xfaf9c000-0xfaf9ffff,0xfafc0000-0xfaffffff irq 28 at device 0.0 on pci12
mfi0: Using MSI
mfi0: Megaraid SAS driver Ver 4.23
mfi0: FW MaxCmds = 1008, limiting to 128
mfip0: <SCSI Passthrough Bus> on mfi0
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci11: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci7: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci7
pci8: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 2.0 on pci8
pci10: <PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xdf80-0xdf9f mem 0xfae60000-0xfae7ffff,0xfae80000-0xfaefffff irq 29 at device 0.0 on pci10
em0: Using an MSI interrupt
em0: Ethernet address: 00:26:55:db:b6:8d
em1: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xdf40-0xdf5f mem 0xfad60000-0xfad7ffff,0xfad80000-0xfadfffff irq 27 at device 0.1 on pci10
em1: Using an MSI interrupt
em1: Ethernet address: 00:26:55:db:b6:8c
pcib6: <PCI-PCI bridge> at device 4.0 on pci8
pci9: <PCI bus> on pcib6
em2: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xcf80-0xcf9f mem 0xfac60000-0xfac7ffff,0xfac80000-0xfacfffff irq 25 at device 0.0 on pci9
em2: Using an MSI interrupt
em2: Ethernet address: 00:26:55:db:b6:8f
em3: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xcf40-0xcf5f mem 0xfab60000-0xfab7ffff,0xfab80000-0xfabfffff irq 26 at device 0.1 on pci9
em3: Using an MSI interrupt
em3: Ethernet address: 00:26:55:db:b6:8e
pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci6: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib8
pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 20.3 (no driver attached)
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0x9ea0-0x9ebf irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0x9e80-0x9e9f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0x9e20-0x9e3f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xfa8f4000-0xfa8f43ff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
pcib9: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib10
em4: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xaf80-0xaf9f mem 0xfa9e0000-0xfa9fffff,0xfa9dc000-0xfa9dffff irq 16 at device 0.0 on pci3
em4: Using MSIX interrupts with 3 vectors
em4: Ethernet address: 00:25:50:59:bb:90
pcib11: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib11
em5: <Intel(R) PRO/1000 Network Connection 7.4.2> port 0xbf80-0xbf9f mem 0xfaae0000-0xfaafffff,0xfaadc000-0xfaadffff irq 17 at device 0.0 on pci4
em5: Using MSIX interrupts with 3 vectors
em5: Ethernet address: 00:25:50:59:bb:91
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0x9f20-0x9f3f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0x9f00-0x9f1f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0x9ec0-0x9edf irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xfa8f6000-0xfa8f63ff irq 23 at device 29.7 on pci0
usbus7: waiting for BIOS to give up control
usbus7: timed out waiting for BIOS
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib12
vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xf9ffc000-0xf9ffffff,0xfa000000-0xfa7fffff irq 16 at device 3.0 on pci1
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH10 AHCI SATA controller> port 0x9ff0-0x9ff7,0x9fac-0x9faf,0x9fe0-0x9fe7,0x9fa8-0x9fab,0x9f80-0x9f9f mem 0xfa8fa000-0xfa8fa7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
qpi0: <QPI system bus> on motherboard
pcib13: <QPI Host-PCI bridge> pcibus 255 on qpi0
pci255: <PCI bus> on pcib13
pcib14: <QPI Host-PCI bridge> pcibus 254 on qpi0
pci254: <PCI bus> on pcib14
ichwd0 on isa0
wbwd0: <Winbond 83627HF/F/HG/G Rev. UD-A> at port 0x2e-0x2f on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcb000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
coretemp8: <CPU On-Die Thermal Sensors> on cpu8
est8: <Enhanced SpeedStep Frequency Control> on cpu8
coretemp9: <CPU On-Die Thermal Sensors> on cpu9
est9: <Enhanced SpeedStep Frequency Control> on cpu9
coretemp10: <CPU On-Die Thermal Sensors> on cpu10
est10: <Enhanced SpeedStep Frequency Control> on cpu10
coretemp11: <CPU On-Die Thermal Sensors> on cpu11
est11: <Enhanced SpeedStep Frequency Control> on cpu11
coretemp12: <CPU On-Die Thermal Sensors> on cpu12
est12: <Enhanced SpeedStep Frequency Control> on cpu12
coretemp13: <CPU On-Die Thermal Sensors> on cpu13
est13: <Enhanced SpeedStep Frequency Control> on cpu13
coretemp14: <CPU On-Die Thermal Sensors> on cpu14
est14: <Enhanced SpeedStep Frequency Control> on cpu14
coretemp15: <CPU On-Die Thermal Sensors> on cpu15
est15: <Enhanced SpeedStep Frequency Control> on cpu15
mfi0: 6869 (508617990s/0x0020/info) - Shutdown command received from host
mfi0: 6870 (boot + 3s/0x0020/info) - Firmware initialization started (PCI ID 0079/1000/9261/1000)
mfi0: 6871 (boot + 3s/0x0020/info) - Firmware version 2.130.403-4660
mfi0: 6872 (boot + 9s/0x0008/info) - Battery Present
mfi0: 6873 (boot + 10s/0x0020/info) - Package version 12.15.0-0239
mfi0: 6874 (boot + 10s/0x0020/info) - Board Revision 84A
mfi0: 6875 (boot + 29s/0x0002/info) - Inserted: PD 0a(e0xff/s3)
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
mfi0: 6876 (boot + 29s/0x0002/info) - Inserted: PD 0a(e0xff/s3) Info: enclPd=ffff, scsiType=0, portMap=00, sasAddr=4433221100000000,0000000000000000
mfi0: 6877 (boot + 29s/0x0002/info) - Inserted: PD 0b(e0xff/s2)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
mfid0 on mfi0
mfid0: 7629824MB (15625879552 sectors) RAID volume (no label) is optimal
mfi0: 6878 (boot + 29s/0x0002/info) - Inserted: PD 0b(e0xff/s2) Info: enclPd=ffff, scsiType=0, portMap=02, sasAddr=4433221101000000,0000000000000000
mfi0: 6879 (boot + 29s/0x0002/info) - Inserted: PD 0c(e0xff/s1)
mfi0: 6880 (boot + 29s/0x0002/info) - Inserted: PD 0c(e0xff/s1) Info: enclPd=ffff, scsiType=0, portMap=03, sasAddr=4433221102000000,0000000000000000
mfi0: 6881 (boot + 29s/0x0002/info) - Inserted: PD 0d(e0xff/s0)
mfi0: 6882 (boot + 29s/0x0002/info) - Inserted: PD 0d(e0xff/s0) Info: enclPd=ffff, scsiType=0, portMap=01, sasAddr=4433221103000000,0000000000000000
mfi0: 6883 (508618039s/0x0020/info) - Time established as 02/12/16 18:47:19; (32 seconds since power on)
mfi0: 6884 (508618067s/0x0008/info) - Battery temperature is normal
mfi0: 6885 (508618081s/0x0020/info) - Host driver is loaded and operational
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen4.2: <Tripp Lite> at usbus4
uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.00, addr 2> on usbus4
ugen2.2: <American Megatrends Inc.> at usbus2
ukbd0: <Keyboard Interface> on usbus2
kbd2 at ukbd0
ums0: <Mouse Interface> on usbus2
ugen4.3: <vendor 0x0451> at usbus4
uhub8: <General Purpose USB Hub> on usbus4
ugen7.2: <SanDisk> at usbus7
umass0: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.27, addr 2> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x8100
umass0:8:0:-1: Attached to scbus8
uhub8: 2 ports with 1 removable, bus powered
ugen4.4: <Logitech> at usbus4
ukbd1: <Logitech USB Receiver, class 0/0, rev 1.10/22.40, addr 4> on usbus4
kbd3 at ukbd1
ums1: <Logitech USB Receiver, class 0/0, rev 1.10/22.40, addr 4> on usbus4
ums1: 10 buttons and [XYZT] coordinates ID=2
ugen7.3: <SanDisk> at usbus7
umass1: <SanDisk Cruzer Glide, class 0/0, rev 2.00/1.27, addr 3> on usbus7
umass1: SCSI over Bulk-Only; quirks = 0x8100
umass1:9:1:-1: Attached to scbus9
ugen4.5: <Logitech> at usbus4
ukbd2: <Logitech Desktop USB stand, class 0/0, rev 1.10/41.02, addr 5> on usbus4
kbd4 at ukbd2
da0 at umass-sim0 bus 0 scbus8 target 0 lun 0
da0: <SanDisk Cruzer Glide 1.27> Removable Direct Access SCSI-6 device
da0: Serial Number 4C530001180702109272
da0: 40.000MB/s transfers
da0: 14907MB (30529536 512 byte sectors: 255H 63S/T 1900C)
da0: quirks=0x2<NO_6_BYTE>
da1 at umass-sim1 bus 1 scbus9 target 0 lun 0
da1: <SanDisk Cruzer Glide 1.27> Removable Direct Access SCSI-6 device
da1: Serial Number 4C530001250702109480
da1: 40.000MB/s transfers
da1: 14907MB (30529536 512 byte sectors: 255H 63S/T 1900C)
da1: quirks=0x2<NO_6_BYTE>
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <OCZ-VERTEX4 1.4> ATA-9 SATA 3.x device
ada0: Serial Number OCZ-733J397Q3J5Y57I9
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
ada0: quirks=0x1<4K>
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <OCZ-VERTEX4 1.4> ATA-9 SATA 3.x device
ada1: Serial Number OCZ-926WT4QK37FQ8F86
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 61057MB (125045424 512 byte sectors: 16H 63S/T 16383C)
ada1: quirks=0x1<4K>
ada1: Previously was known as ad6
pass0 at mfi0 bus 0 scbus0 target 10 lun 0
pass0: <ATA WDC WD40EFRX-68W 0A82> Fixed Uninstalled SCSI-5 device
pass0: Serial Number WD-WCC4E3JH4ZVD
pass0: 150.000MB/s transfers
pass1 at mfi0 bus 0 scbus0 target 11 lun 0
pass1: <ATA WDC WD40EFRX-68W 0A82> Fixed Uninstalled SCSI-5 device
pass1: Serial Number WD-WCC4E0EXNRHV
pass1: 150.000MB/s transfers
pass2 at mfi0 bus 0 scbus0 target 12 lun 0
pass2: <ATA WDC WD40EFRX-68W 0A82> Fixed Uninstalled SCSI-5 device
pass2: Serial Number WD-WCC4E3JH4Z2H
pass2: 150.000MB/s transfers
pass3 at mfi0 bus 0 scbus0 target 13 lun 0
pass3: <ATA WDC WD40EFRX-68W 0A82> Fixed Uninstalled SCSI-5 device
pass3: Serial Number WD-WCC4E0SEJP5D
pass3: 150.000MB/s transfers
SMP: AP CPU #1 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #12 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #13 Launched!
Timecounter "TSC-low" frequency 1266738852 Hz quality 1000
Trying to mount root from zfs:freenas-boot/ROOT/FreeNAS-9.3-STABLE-201601181840 []...
GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
GEOM_ELI: Device gptid/c43b8c98-8ae1-11e5-8b39-002655dbb68d.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca2 alignment 0x1 on isa
ipmi0: IPMI device rev. 1, firmware rev. 2.22, version 2.0
ipmi0: Number of channels 2
ipmi0: Attached watchdog
GEOM_ELI: Device mfid0p1.eli created.
GEOM_ELI: Encryption: AES-XTS 256
GEOM_ELI: Crypto: software
vboxdrv: fAsync=0 offMin=0x24a offMax=0x2dde
mfi0: 6886 (508643998s/0x0020/info) - Patrol Read started
mfi0: 6887 (508643998s/0x0001/info) - Consistency Check started on VD 00/0
mfi0: 6888 (508643998s/0x0002/info) - Patrol read aborted on PD 0b(e0xfc/s2) due to conflict with other background operations
mfi0: 6889 (508643998s/0x0002/info) - Patrol read aborted on PD 0a(e0xfc/s3) due to conflict with other background operations
mfi0: 6890 (508643998s/0x0002/info) - Patrol read aborted on PD 0c(e0xfc/s1) due to conflict with other background operations
mfi0: 6891 (508643998s/0x0002/info) - Patrol read aborted on PD 0d(e0xfc/s0) due to conflict with other background operations
mfi0: 7130 (508661687s/0x0008/info) - Battery relearn will start in 1 day
mfi0: 7295 (508678968s/0x0001/info) - Consistency Check done on VD 00/0
[root@fileserver1] /mnt# df -lah
Filesystem Size Used Avail Capacity Mounted on
freenas-boot/ROOT/FreeNAS-9.3-STABLE-201601181840 13G 519M 12G 4% /
devfs 1.0k 1.0k 0B 100% /dev
tmpfs 32M 6.2M 25M 19% /etc
tmpfs 4.0M 8.0k 4M 0% /mnt
tmpfs 16G 185M 15G 1% /var
freenas-boot/grub 12G 6.8M 12G 0% /boot/grub
Storage 3T 3T 3G 100% /mnt/Storage
Storage/jails 3G 172k 3G 0% /mnt/Storage/jails
Storage/jails/.warden-template-VirtualBox-4.3.12 3.6G 660M 3G 18% /mnt/Storage/jails/.warden-template-VirtualBox-4.3.12
Storage/jails/.warden-template-pluginjail 3.4G 449M 3G 13% /mnt/Storage/jails/.warden-template-pluginjail
Storage/jails/.warden-template-pluginjail--x64 3.4G 449M 3G 13% /mnt/Storage/jails/.warden-template-pluginjail--x64
Storage/jails/.warden-template-pluginjail--x64-20151126211202 3.4G 449M 3G 13% /mnt/Storage/jails/.warden-template-pluginjail--x64-20151126211202
Storage/jails/.warden-template-standard 4.6G 1.6G 3G 35% /mnt/Storage/jails/.warden-template-standard
Storage/jails/couchpotato_1 3.6G 640M 3G 17% /mnt/Storage/jails/couchpotato_1
Storage/jails/plexmediaserver_1 3.8G 794M 3G 21% /mnt/Storage/jails/plexmediaserver_1
Storage/jails/transmission_1 3.5G 573M 3G 16% /mnt/Storage/jails/transmission_1
Storage/.system 3G 104k 3G 0% /var/db/system
Storage/.system/cores 3G 1.9M 3G 0% /var/db/system/cores
Storage/.system/samba4 3G 408k 3G 0% /var/db/system/samba4
Storage/.system/syslog-f1ae6c68bbe041c7bb38cadeec088781 3G 980k 3G 0% /var/db/system/syslog-f1ae6c68bbe041c7bb38cadeec088781
Storage/.system/rrd-f1ae6c68bbe041c7bb38cadeec088781 3G 96k 3G 0% /var/db/system/rrd-f1ae6c68bbe041c7bb38cadeec088781
Storage/.system/configs-f1ae6c68bbe041c7bb38cadeec088781 3G 3.5M 3G 0% /var/db/system/configs-f1ae6c68bbe041c7bb38cadeec088781
[root@fileserver1] /mnt# zpool status
pool: Storage
state: ONLINE
scan: scrub repaired 0 in 5h20m with 0 errors on Sun Jan 10 03:50:07 2016
config:
NAME STATE READ WRITE CKSUM
Storage ONLINE 0 0 0
gptid/c43b8c98-8ae1-11e5-8b39-002655dbb68d.eli ONLINE 0 0 0
logs
mirror-1 ONLINE 0 0 0
ada0p1 ONLINE 0 0 0
ada1p1 ONLINE 0 0 0
cache
ada0p2 ONLINE 0 0 0
ada1p2 ONLINE 0 0 0
errors: No known data errors
pool: freenas-boot
state: ONLINE
scan: scrub repaired 0 in 0h6m with 0 errors on Mon Jan 11 18:08:35 2016
config:
NAME STATE READ WRITE CKSUM
freenas-boot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gptid/9e2f37ed-3f1e-11e5-97cc-002655dbb68d ONLINE 0 0 0
gptid/9e91c992-3f1e-11e5-97cc-002655dbb68d ONLINE 0 0 0
errors: No known data errors
[root@fileserver1] /mnt# zpool list Storage
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
Storage 7.25T 2.99T 4.26T - 19% 41% 1.00x ONLINE /mnt
[root@fileserver1] /mnt#
As you can see the "Alloc" in the zpool is 2.99T but the Size is 7.25 is there any way to change the ALLOC without destroying the data do I need to use the "GrowFS?" command? or is there some other way I have missed?
