Irgendjemand5
Dabbler
- Joined
- Sep 20, 2021
- Messages
- 14
Pool pool_sicher state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected.
the cpu cooler fan tried to saw into a sas to sata cable... error might be related to that.
The pool consists of two mirrored drives: 2TB wd red + 2TB Samsung evo 870 (because its my opinion that samsung evo drives don't die on you)
I followed this tread:
www.truenas.com
but I'm not sure what the output means.
zpool status -v
checked drives with glabel status
drive is the WD red -> long smart Test
smartctl -A /dev/da5
soo delete error message and see if error repeats itself? and if yes replace drive?
or replace drive now?
System:
mainboard: S26361-D3128-A1
CPU: Intel Xeon E5-2630
Ram: 4x 8gb M393B1K70CH0-YH9 ecc rdim
LSI 6Gbps SAS HBA 9240-8I IT Mode card
the cpu cooler fan tried to saw into a sas to sata cable... error might be related to that.
The pool consists of two mirrored drives: 2TB wd red + 2TB Samsung evo 870 (because its my opinion that samsung evo drives don't die on you)
I followed this tread:
One or more devices has experienced an unrecoverable error
I logged in to my server today to check something and saw this error. Also apparently email alerts are broken but that's another issue. "The volume PoolB state is ONLINE: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are...

zpool status -v
Code:
pool: pool_sicher state: ONLINE status: One or more devices has experienced an unrecoverable error. An attempt was made to correct the error. Applications are unaffected. action: Determine if the device needs to be replaced, and clear the errors using 'zpool clear' or replace the device with 'zpool replace'. see: https://openzfs.github.io/openzfs-docs/msg/ZFS-8000-9P scan: resilvered 1.85M in 00:00:30 with 0 errors on Mon Nov 22 11:23:50 2021 config: NAME STATE READ WRITE CKSUM pool_sicher ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 gptid/25224f30-1e1e-11ec-97f0-e0cb4e196da1 ONLINE 0 0 0 gptid/25898187-1e1e-11ec-97f0-e0cb4e196da1 ONLINE 0 49 0 errors: No known data errors
checked drives with glabel status
drive is the WD red -> long smart Test
smartctl -A /dev/da5
Code:
smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p9 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 169 169 021 Pre-fail Always - 4516 4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6066 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 041 041 000 Old_age Always - 43690 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5368 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 43 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6069 194 Temperature_Celsius 0x0022 112 104 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 123 000 Old_age Always - 101 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
soo delete error message and see if error repeats itself? and if yes replace drive?
or replace drive now?
System:
mainboard: S26361-D3128-A1
CPU: Intel Xeon E5-2630
Ram: 4x 8gb M393B1K70CH0-YH9 ecc rdim
LSI 6Gbps SAS HBA 9240-8I IT Mode card
Last edited: