EDIT: added additional sources
Hello,
I just installed a new NVME, which also reports back the given errors:
SMART State:
Code:
root@truenas[/var/log]# smartctl -a /dev/nvme0
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.109+truenas] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: CT250P2SSD8
Serial Number: 2212E61EDB67
Firmware Version: P2CR048
PCI Vendor/Subsystem ID: 0xc0a9
IEEE OUI Identifier: 0x00a075
Total NVM Capacity: 250,059,350,016 [250 GB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.3
Number of Namespaces: 1
Namespace 1 Size/Capacity: 250,059,350,016 [250 GB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 00a075 6000000143
Local Time is: Mon Jun 6 17:11:59 2022 CEST
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x0e): Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size: 64 Pages
Warning Comp. Temp. Threshold: 70 Celsius
Critical Comp. Temp. Threshold: 85 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 3.50W - - 0 0 0 0 0 0
1 + 1.90W - - 1 1 1 1 0 0
2 + 1.50W - - 2 2 2 2 0 0
3 - 0.0700W - - 3 3 3 3 5000 1900
4 - 0.0020W - - 4 4 4 4 13000 100000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 1
1 - 4096 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 34 Celsius
Available Spare: 100%
Available Spare Threshold: 5%
Percentage Used: 0%
Data Units Read: 22 [11.2 MB]
Data Units Written: 152 [77.8 MB]
Host Read Commands: 307
Host Write Commands: 792
Controller Busy Time: 0
Power Cycles: 1
Power On Hours: 1
Unsafe Shutdowns: 0
Media and Data Integrity Errors: 0
Error Information Log Entries: 132
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 47 Celsius
Error Information (NVMe Log 0x01, 16 of 16 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 132 0 0xd007 0x4005 - 0 0 -
1 131 0 0xd006 0x4005 - 0 0 -
2 130 0 0x000a 0x4005 - 0 0 -
3 129 0 0xb00d 0x4005 - 0 0 -
4 128 0 0xf00a 0x4004 - 0 0 -
5 127 0 0xf009 0x4004 - 0 0 -
6 126 0 0xa00c 0x4004 - 0 0 -
7 125 0 0x900f 0x4004 - 0 0 -
8 124 0 0xa006 0x4004 - 0 0 -
9 123 0 0xa005 0x4004 - 0 0 -
10 122 0 0xe017 0x4004 - 0 0 -
11 121 0 0xd00b 0x4004 - 0 0 -
12 120 0 0x800d 0x4005 - 0 0 -
13 119 0 0xe014 0x4005 - 0 0 -
14 118 0 0xc00b 0x4005 - 0 0 -
15 117 0 0xc00a 0x4005 - 0 0 -
nvme error-log:
It looks like the same as:
https://github.com/linux-nvme/nvme-cli/issues/1130 &
https://github.com/linux-nvme/nvme-cli/issues/411
https://www.smartmontools.org/ticket/1222#no1 &
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900244 &
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=900244 &
https://bugs.launchpad.net/ubuntu/+source/smartmontools/+bug/1878264
Code:
root@truenas[/var/log]# nvme error-log /dev/nvme0
Error Log Entries for device:nvme0 entries:16
.................
Entry[ 0]
.................
error_count : 136
sqid : 0
cmdid : 0xc002
status_field : 0x4004(INVALID_FIELD: A reserved coded value or an unsupported value in a defined field)
parm_err_loc : 0xffff
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 1]
.................
error_count : 135
sqid : 0
cmdid : 0xc00d
status_field : 0x4004(INVALID_FIELD: A reserved coded value or an unsupported value in a defined field)
parm_err_loc : 0xffff
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 2]
.................
error_count : 134
sqid : 0
cmdid : 0xf006
status_field : 0x4005(INVALID_FIELD: A reserved coded value or an unsupported value in a defined field)
parm_err_loc : 0xffff
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 3]
.................
error_count : 133
sqid : 0
cmdid : 0xf005
status_field : 0x4005(INVALID_FIELD: A reserved coded value or an unsupported value in a defined field)
parm_err_loc : 0xffff
lba : 0
nsid : 0
vs : 0
trtype : The transport type is not indicated or the error is not transport related.
cs : 0
trtype_spec_info: 0
.................
Entry[ 4]
.................
root@truenas[/var/log]# nvme list
Node SN Model Namespace Usage Format FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1 2212E61EDB67 CT250P2SSD8 1 250.06 GB / 250.06 GB 512 B + 0 B P2CR048
/dev/nvme1n1 50026B7684C76DB6 KINGSTON SA2000M8250G 1 250.05 GB / 250.06 GB 512 B + 0 B S5Z42105