I managed to recover from failed disk, altough with some issues and data loss. I've tried to set SMB share permissions, and this resulted in something really weird
As you can see, dataset exists, occupies quite a bit of space, nothing is visible below root. Here is dataset properties just in case
Would really appreciate some help here.
Code:
root@truenas[/mnt]# zfs list NAME USED AVAIL REFER MOUNTPOINT MIKE-NAS 3.79T 8.25T 3.79T /mnt/MIKE-NAS MIKE-NAS/.system 993M 8.25T 847M legacy MIKE-NAS/.system/configs-646f8dae97d646cc8946ddeb0ca79d97 290K 8.25T 290K legacy MIKE-NAS/.system/configs-d6d294a404024d4b9f621e6bf1afa53c 5.77M 8.25T 5.77M legacy MIKE-NAS/.system/configs-df5fe888f04f4340ae54ffa94b1cb4f6 32.2M 8.25T 32.2M legacy MIKE-NAS/.system/cores 707K 1023M 707K legacy MIKE-NAS/.system/rrd-646f8dae97d646cc8946ddeb0ca79d97 23.8M 8.25T 23.8M legacy MIKE-NAS/.system/rrd-d6d294a404024d4b9f621e6bf1afa53c 23.8M 8.25T 23.8M legacy MIKE-NAS/.system/rrd-df5fe888f04f4340ae54ffa94b1cb4f6 39.1M 8.25T 39.1M legacy MIKE-NAS/.system/samba4 5.65M 8.25T 721K legacy MIKE-NAS/.system/services 162K 8.25T 162K legacy MIKE-NAS/.system/syslog-646f8dae97d646cc8946ddeb0ca79d97 1.18M 8.25T 1.18M legacy MIKE-NAS/.system/syslog-d6d294a404024d4b9f621e6bf1afa53c 8.10M 8.25T 8.10M legacy MIKE-NAS/.system/syslog-df5fe888f04f4340ae54ffa94b1cb4f6 4.47M 8.25T 4.47M legacy MIKE-NAS/.system/webui 148K 8.25T 148K legacy freenas-boot 2.77G 89.8G 88K none freenas-boot/.system 8.90M 89.8G 128K legacy freenas-boot/.system/configs-df5fe888f04f4340ae54ffa94b1cb4f6 96K 89.8G 96K legacy freenas-boot/.system/cores 708K 1023M 708K legacy freenas-boot/.system/rrd-df5fe888f04f4340ae54ffa94b1cb4f6 7.08M 89.8G 7.08M legacy freenas-boot/.system/samba4 476K 89.8G 220K legacy freenas-boot/.system/services 96K 89.8G 96K legacy freenas-boot/.system/syslog-df5fe888f04f4340ae54ffa94b1cb4f6 264K 89.8G 264K legacy freenas-boot/.system/webui 96K 89.8G 96K legacy freenas-boot/ROOT 2.75G 89.8G 88K none freenas-boot/ROOT/13.0-U2 2.75G 89.8G 1.50G / freenas-boot/ROOT/Initial-Install 8K 89.8G 1.24G legacy freenas-boot/ROOT/default 328K 89.8G 1.24G legacy root@truenas[/mnt/MIKE-NAS]# pwd /mnt/MIKE-NAS root@truenas[/mnt/MIKE-NAS]# ls -la total 0 drwxr-xr-x 2 root wheel 0 Jan 15 23:47 . drwxr-xr-x 3 root wheel 128 Jan 15 23:47 .. root@truenas[/mnt/MIKE-NAS]#
As you can see, dataset exists, occupies quite a bit of space, nothing is visible below root. Here is dataset properties just in case
Code:
root@truenas[/mnt/MIKE-NAS]# zfs get all MIKE-NAS NAME PROPERTY VALUE SOURCE MIKE-NAS type filesystem - MIKE-NAS creation Sat Sep 30 10:32 2017 - MIKE-NAS used 3.79T - MIKE-NAS available 8.25T - MIKE-NAS referenced 3.79T - MIKE-NAS compressratio 1.00x - MIKE-NAS mounted no - MIKE-NAS quota none local MIKE-NAS reservation none local MIKE-NAS recordsize 128K default MIKE-NAS mountpoint /mnt/MIKE-NAS default MIKE-NAS sharenfs off default MIKE-NAS checksum on default MIKE-NAS compression lz4 local MIKE-NAS atime on default MIKE-NAS devices on default MIKE-NAS exec on default MIKE-NAS setuid on default MIKE-NAS readonly off default MIKE-NAS jailed off default MIKE-NAS snapdir hidden default MIKE-NAS aclmode passthrough local MIKE-NAS aclinherit passthrough local MIKE-NAS createtxg 1 - MIKE-NAS canmount on default MIKE-NAS xattr on default MIKE-NAS copies 1 default MIKE-NAS vscan off default MIKE-NAS nbmand off default MIKE-NAS sharesmb off default MIKE-NAS refquota none local MIKE-NAS refreservation none local MIKE-NAS guid 3647072002783344407 - MIKE-NAS primarycache all default MIKE-NAS secondarycache all default MIKE-NAS usedbysnapshots 0B - MIKE-NAS usedbydataset 3.79T - MIKE-NAS usedbychildren 1.08G - MIKE-NAS usedbyrefreservation 0B - MIKE-NAS logbias latency default MIKE-NAS objsetid 21 - MIKE-NAS dedup off default MIKE-NAS mlslabel none default MIKE-NAS sync standard default MIKE-NAS dnodesize legacy default MIKE-NAS refcompressratio 1.00x - MIKE-NAS written 3.79T - MIKE-NAS logicalused 3.80T - MIKE-NAS logicalreferenced 3.80T - MIKE-NAS volmode default default MIKE-NAS filesystem_limit none default MIKE-NAS snapshot_limit none default MIKE-NAS filesystem_count none default MIKE-NAS snapshot_count none default MIKE-NAS snapdev hidden default MIKE-NAS acltype nfsv4 default MIKE-NAS context none default MIKE-NAS fscontext none default MIKE-NAS defcontext none default MIKE-NAS rootcontext none default MIKE-NAS relatime off default MIKE-NAS redundant_metadata all default MIKE-NAS overlay on default MIKE-NAS encryption off default MIKE-NAS keylocation none default MIKE-NAS keyformat none default MIKE-NAS pbkdf2iters 0 default MIKE-NAS special_small_blocks 0 default MIKE-NAS org.freenas:description I local MIKE-NAS org.freebsd.ioc:active yes local
Would really appreciate some help here.
