Noob haveing trouble with volume degraded

[redskinjonesy]

I hope for 2 things
1 - I dont sound 2 dumb
2 - that i can explain this properly

I re purposed an old pc into a nas. I bought 2 seagate 2tb nas drives and used freenas 9.2.1.2 on usb stick as the os..
Everything installed easily and I set up the volume and share with no problem using ufs mirror.
I used ufs mirror as I only have the 2 drives and 2g ram...
everything seems to be working no problem except -
when I log into the nas gui, I have a critical message, volume degraded.
When I look at volume status it says
volume - degraded
ada1 - active
ada0 - synchronizing...

Im assuming the issue is the mirror, but I just don't have a lot of experience with this stuff to know or tell what the real problem is...

again, everything is working, i can write files to the share no problem...

 

[redskinjonesy]

Hm...just checked and now everything is healthy... is it safe to assume while the drives are synchronizing the volume is considered degraded?

 

[Yatti420]

Ok.. First did you do the proper burn-in/testing on the machine & new drives? Please run "smartctl -a -q noserial /dev/ada0" "smartctl -a -q noserial /dev/ada1" and post the output here..

 

[redskinjonesy]

well, the tutorial I followed mentioned nothing of testing or burn in... but here is the results
""
Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 006 Pre-fail Always - 671264 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 463797 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 19 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 20 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 090 090 000 Old_age Always - 10 190 Airflow_Temperature_Cel 0x0022 071 066 045 Old_age Always - 29 (Min/Max 27/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 19 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 16 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute



and

""ell



SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 100 006 Pre-fail Always - 203774456 3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 27340 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 20 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 071 066 045 Old_age Always - 29 (Min/Max 27/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 19 194 Temperature_Celsius 0x0022 029 040 000 Old_age Always - 29 (0 16 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. [root@freenas ~]# ^C [root@freenas ~]# ^C [root@freenas ~]#

 

[Yatti420]

Please (fix smart) post in code tags.. Can you also add "zpool list" and "zpool status" Thanks

Edit: Please post the hardware you are using aswell.. Everything..

 

[redskinjonesy]

ada0

Code:

Conveyance self-test routine                                                                                                       
recommended polling time:        (  2) minutes.                                                                                   
SCT capabilities:              (0x10bd) SCT Status supported.                                                                     
                                        SCT Error Recovery Control supported.                                                     
                                        SCT Feature Control supported.                                                             
                                        SCT Data Table supported.                                                                 
                                                                                                                                   
SMART Attributes Data Structure revision number: 10                                                                               
Vendor Specific SMART Attributes with Thresholds:                                                                                 
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE                                   
  1 Raw_Read_Error_Rate    0x000f  100  100  006    Pre-fail  Always      -      1508208                                     
  3 Spin_Up_Time            0x0003  096  096  000    Pre-fail  Always      -      0                                           
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      21                                         
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      0                                           
  7 Seek_Error_Rate        0x000f  100  253  030    Pre-fail  Always      -      469661                                     
  9 Power_On_Hours          0x0032  100  100  000    Old_age  Always      -      26                                         
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0                                           
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      22                                         
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0                                           
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0                                           
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      0                                           
189 High_Fly_Writes        0x003a  090  090  000    Old_age  Always      -      10                                         
190 Airflow_Temperature_Cel 0x0022  070  066  045    Old_age  Always      -      30 (Min/Max 29/31)                         
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0                                           
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      17                                         
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      21                                         
194 Temperature_Celsius    0x0022  030  040  000    Old_age  Always      -      30 (0 16 0 0 0)                             
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      0                                           
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      0                                           
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0                                           
                                                                                                                                   
SMART Error Log Version: 1                                                                                                         
No Errors Logged                                                                                                                   
                                                                                                                                   
SMART Self-test log structure revision number 1                                                                                   
No self-tests have been logged.  [To run self-tests, use: smartctl -t]                                                             
                                                                                                                                   
                                                                                                                                   
SMART Selective self-test log data structure revision number 1                                                                     
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS                                                                                       
    1        0        0  Not_testing                                                                                               
    2        0        0  Not_testing                                                                                               
    3        0        0  Not_testing                                                                                               
    4        0        0  Not_testing                                                                                               
    5        0        0  Not_testing                                                                                               
Selective self-test flags (0x0):                                                                                                   
  After scanning selected spans, do NOT read-scan remainder of disk.                                                               
If Selective self-test is pending on power-up, resume after 0 minute delay.  

ada1

Code:

Conveyance self-test routine                                                                                                       
recommended polling time:        (  2) minutes.                                                                                   
SCT capabilities:              (0x10bd) SCT Status supported.                                                                     
                                        SCT Error Recovery Control supported.                                                     
                                        SCT Feature Control supported.                                                             
                                        SCT Data Table supported.                                                                 
                                                                                                                                   
SMART Attributes Data Structure revision number: 10                                                                               
Vendor Specific SMART Attributes with Thresholds:                                                                                 
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE                                   
  1 Raw_Read_Error_Rate    0x000f  119  100  006    Pre-fail  Always      -      204648632                                   
  3 Spin_Up_Time            0x0003  096  096  000    Pre-fail  Always      -      0                                           
  4 Start_Stop_Count        0x0032  100  100  020    Old_age  Always      -      21                                         
  5 Reallocated_Sector_Ct  0x0033  100  100  010    Pre-fail  Always      -      0                                           
  7 Seek_Error_Rate        0x000f  100  253  030    Pre-fail  Always      -      33208                                       
  9 Power_On_Hours          0x0032  100  100  000    Old_age  Always      -      26                                         
10 Spin_Retry_Count        0x0013  100  100  097    Pre-fail  Always      -      0                                           
12 Power_Cycle_Count      0x0032  100  100  020    Old_age  Always      -      22                                         
184 End-to-End_Error        0x0032  100  100  099    Old_age  Always      -      0                                           
187 Reported_Uncorrect      0x0032  100  100  000    Old_age  Always      -      0                                           
188 Command_Timeout        0x0032  100  100  000    Old_age  Always      -      0                                           
189 High_Fly_Writes        0x003a  100  100  000    Old_age  Always      -      0                                           
190 Airflow_Temperature_Cel 0x0022  070  066  045    Old_age  Always      -      30 (Min/Max 30/31)                         
191 G-Sense_Error_Rate      0x0032  100  100  000    Old_age  Always      -      0                                           
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      17                                         
193 Load_Cycle_Count        0x0032  100  100  000    Old_age  Always      -      21                                         
194 Temperature_Celsius    0x0022  030  040  000    Old_age  Always      -      30 (0 16 0 0 0)                             
197 Current_Pending_Sector  0x0012  100  100  000    Old_age  Always      -      0                                           
198 Offline_Uncorrectable  0x0010  100  100  000    Old_age  Offline      -      0                                           
199 UDMA_CRC_Error_Count    0x003e  200  200  000    Old_age  Always      -      0                                           
                                                                                                                                   
SMART Error Log Version: 1                                                                                                         
No Errors Logged                                                                                                                   
                                                                                                                                   
SMART Self-test log structure revision number 1                                                                                   
No self-tests have been logged.  [To run self-tests, use: smartctl -t]                                                             
                                                                                                                                   
                                                                                                                                   
SMART Selective self-test log data structure revision number 1                                                                     
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS                                                                                       
    1        0        0  Not_testing                                                                                               
    2        0        0  Not_testing                                                                                               
    3        0        0  Not_testing                                                                                               
    4        0        0  Not_testing                                                                                               
    5        0        0  Not_testing                                                                                               
Selective self-test flags (0x0):                                                                                                   
  After scanning selected spans, do NOT read-scan remainder of disk.                                                               
If Selective self-test is pending on power-up, resume after 0 minute 

No pools available... this is a ufs volume...

asus m2n-mx se plus mother brd
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+
2g ram..