NAS stopped after a reboot

[nayrb]

has anyone seen this error
it stops at
******** File System is Clean ***********
Setting hostuuid: 00000000-0000-0000-0000-d43d7e5759c2
Setting hostid: 0x5bd81907
ZFS filesystem version: 5
ZFS storage pool Version: features support (5000)
No suitable dump device was found
Entropy harvesting: interrupts ethernet point_to_point
Fatal trap 12: page fault while in kernel mode cpuid = 3; apic id = 03
fault virtual address = 0xfffffdff8443c7d8
fault code = supervisor read data, page not present
instrution pointer = 0x20:0xffffffff808132e7
stack pointer = 0x28:0xffffff8245b10250
frame pointer = 0x28:0xffffff8245b10280
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 350 (sysctl)
[thred pid 350 tid 100081 ]
stopped at _rw_runlock+0x57: movq 0x18(%r12),%rdx
db>

i have
version 9.1.1

 

[dlavigne]

The USB stick may have died. Try installing the same version to a new USB stick.

 

[dlavigne]

Notes that you want to reply on your thread, not to the email message.

Close the wizard after the new install. Unless you destroyed your storage pool, it should be mounted for you (you can check in Volume Status).