Register for the iXsystems Community to get an ad-free experience

Message too long Error

mloiterman

Dabbler
Joined
Jan 30, 2013
Messages
45
  • motherboard make and model
    • SuperMicro X11SSH-CTF
      • Firmware Revision : 01.48
      • Firmware Build Time : 06/22/2018
      • BIOS Version: 2.2
      • BIOS Build Time: 05/23/2018
      • Redfish Version : 1.0.1
  • CPU make and model
    • CPU: Intel(R) Xeon(R) CPU E3-1275 v5 @ 3.60GHz (3600.18-MHz K8-class CPU)
      • Origin="GenuineIntel" Id=0x506e3 Family=0x6 Model=0x5e Stepping=3
  • RAM quantity
    • 32 GiB
      • Crucial 2-16GB DDR4-2400 EUDIMM 1.2V CL17
  • boot drive
    • Intel SSD 600p Series SSDPEKKW128G7X1 (128 GB, M.2 80mm PCIe NVMe 3.0 x4, 3D1, TLC)
  • hard drives, quantity, model numbers, and RAID configuration
    • 8 x ST4000LM024
    • RAIDZ2
  • hard disk controllers
    • Avago Technologies (LSI) SAS3008
      • Code:
        Avago Technologies SAS3 Flash UtilityVersion 16.00.00.00 (2017.05.02)
        Copyright 2008-2017 Avago Technologies. All rights reserved.

        Adapter Selected is a Avago SAS: SAS3008(C0)

        Controller Number : 0
        Controller : SAS3008(C0)
        PCI Address : 00:01:00:00
        SAS Address : 5003048-0-1e04-6000
        NVDATA Version (Default) : 0e.00.20.00
        NVDATA Version (Persistent) : 0e.00.20.00
        Firmware Product ID : 0x2221 (IT)
        Firmware Version : 15.00.03.00
        NVDATA Vendor : LSI
        NVDATA Product ID : LSI3008-IT
        BIOS Version : 08.35.00.00
        UEFI BSD Version : 17.00.00.00
        FCODE Version : N/A
        Board Name : LSI3008-IT
        Board Assembly : N/A
        Board Tracer Number : N/A
  • network cards
    • ix0: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xd0200000-0xd03fffff,0xd0404000-0xd0407fff irq 16 at device 0.0 on pci4
    • ix1: <Intel(R) PRO/10GbE PCI-Express Network Driver, Version - 3.2.12-k> mem 0xd0000000-0xd01fffff,0xd0400000-0xd0403fff irq 17 at device 0.1 on pci4
  • FreeNAS-11.2-U3 (Build Date: Mar 27, 2019 18:24)

I’m getting the following error in my console once per minute:
May 8 12:23:23 marshall syslog-ng[2218]: I/O error occurred while writing; fd='5', error='Message too long (40)'

My pool is clean with no errors and all drives seem healthy.

Any ideas what could be causing this?
 
Last edited:

mloiterman

Dabbler
Joined
Jan 30, 2013
Messages
45
This had something to do with remote logging which stopped around the same time this error started. A restart has made the error go away, but I do not know root cause yet.
 
Top