Gaojianli
Cadet
- Joined
- Jan 3, 2023
- Messages
- 1
Hi All, I have received 2 alert email from my nas:
However, I don't have any mdadm device on my machine, all of my 4 disks are using RAIDZ. Also, the mdstat file was empty when i cat it:
The GUI also shows no error for all disks:
This mail subject is "mdadm monitoring" from root, which is not the same as settings.
I wonder if this mail is really from my NAS?
Is there any wrong with my disk?
Why i received these mails?
Thanks.
Code:
This is an automatically generated mail message from mdadm running on nas A Fail event had been detected on md device /dev/md127. It could be related to component device /dev/sdb1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md127 : active raid1 sdb1[1](F) sda1[0] 2094080 blocks super 1.2 [2/1] [U_] [==>..................] resync = 10.9% (230784/2094080) finish=0.1min speed=230784K/sec unused devices: <none>
However, I don't have any mdadm device on my machine, all of my 4 disks are using RAIDZ. Also, the mdstat file was empty when i cat it:
Code:
$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] unused devices: <none>
The GUI also shows no error for all disks:
This mail subject is "mdadm monitoring" from root, which is not the same as settings.
I wonder if this mail is really from my NAS?
Is there any wrong with my disk?
Why i received these mails?
Thanks.