Jerry Durden
Cadet
- Joined
- Oct 18, 2016
- Messages
- 1
I've looked through the forums, but I can't seem to find any guides on how to accomplish this task. I hope that I didn't miss a previous post because I used wrong keyword when searching. If so, then feel free to correct me and provide the link.
I have: 1 Cisco N3K-C3048TP-1GE (4 SPF+ 10Gb ports) Switch, 4 Intel X520-DA2 adapters, and the interconnecting DA adapters.
Currently my setup is ESXi 6 (2 hosts) connected via iSCSi to FreeNAS 9.1 with a dedicated 1Gb NIC solely for storage traffic.
Are there any guides out there that might walk me through how to setup FN to work with FCoE / NCA hardware in order to communicate with ESXi 6? Any help is appreciated.
Thanks so much!
I have: 1 Cisco N3K-C3048TP-1GE (4 SPF+ 10Gb ports) Switch, 4 Intel X520-DA2 adapters, and the interconnecting DA adapters.
Currently my setup is ESXi 6 (2 hosts) connected via iSCSi to FreeNAS 9.1 with a dedicated 1Gb NIC solely for storage traffic.
Are there any guides out there that might walk me through how to setup FN to work with FCoE / NCA hardware in order to communicate with ESXi 6? Any help is appreciated.
Thanks so much!
